XIAOMI Mi Air Purifier 3H /Air Purifier 2S - 0% filter remaining - HACK RFID ! 100% WORK

[@s4ndm4ns]

U mnie zadzialalo to: Here is right solution: 1) Remove the air purifier from Mi Home. 2) Disconnect the unit from power. 3) Press and hold the button on the rear of the purifier while reconnecting power. 4) Continue holding the button until the unit beeps. The unit displays some information about EEPROM. 5) Press the front button ONCE. 6) Press and hold rear button for 5 sec 7) Unplug from power. Wait a few seconds and plug back in. 8) Add back into Mi Home

[@salamingia]

This worked perfectly in 2 mins!! Thank you!

[@sacheesk]

Worked like a charm

[@jeocuneyt]

bro, it worked like a charm. Thanks

[@neroscyter8429]

this works..nice..xiaomi 3H purifier..maybe that's why they no longer sell this unit..

[@rcarrera]

Muchas gracias! Funciono y en menos de 1 minuto lo hice todo

[@Abteilol]

street fighter ultimate combos are less complicated than that ^^

[@IbizaSP]

This is not my fault IT must be done on this way 🙂

[@gioninho]

😂😂😂

[@lipin3268]

Working perfectly no need to do too much just press both buttons untill 3 times beep sound then press on button and pull the plug .thats all

[@Bielk0]

faster method - just hold power button and display button until you hear three beeps, then release display button while still holding power button and then press display button again. then release all buttons and wait for that screen. then press display button to reset and wait for only "wifi" text on display. then unplug it and plug it again.

👍 Thanks, works on my 3H

[@fyansinner5010]

Best!

[@birolisirlar1979]

Perfect, works on my H3

[@naopak6750]

Not sure how i did it but it went a lot faster. I couldn’t accept it required that many pointless steps so i tried it my way. This is how i did it but im sure it also has needless steps but here goes: while its on hold both buttons until you hear it beep 3 times (~30sec) then turn it off and do the same again. You should be able to hear it beep another 3 times. Turn it on and then pull the cable. Voila! Next time ill try to do it without bizarre ‘pull the cable’ move. If anyone finds a shorter instruction, do share.

[@IbizaSP]

that's great, then make a short video so you don't make senseless steps as you wrote it. I'm sorry you had to watch my video and I took 3 minutes of your life. I hope you can find a shorter version, preferably a 30 second one. You can always buy a new filter and replace it, then it will only take 15 seconds

[@naopak6750]

@@IbizaSP Dude 😂 why take it personal?! I just shared what i learned so you can do it easier in the future. Sorry i took away something you could brag about 😂 now you’ll think of me everytime you reset your filter MY way!

[@andyjame9687]

If you’ve never used an air filter these are great. kzbin.infoUgkx_dppjvjF8BYEmPSDTcgCUdRsgWYLXNHN I ended up with three after starting out with one. The noise level depends on the 1-3 settings with how hard you want the machine to work. You can also upgrade the filters and get one better for pet hair and smells which is a must have in my home. I noticed the air seemed lighter and easier to breathe when running the machine for the first time. Works great every time. Highly recommended!

[@KpttpK]

Thanks ! Worked for Xiaomi Smart Air Purifier 4 as well.

[@shashanktandon5035]

This video is authentic. My purifier has a top button instead of a built in screen button but still this worked in the third time

[@rahulwadhawan8040]

Worked! Thanks bro I did little different Turned it on then Press and hold both display and back button until I heard the beep. Then display screen button to turn it off. Then simply pressed both button for 4 consecutive “beep beep beep” and voila entered that screen. Thanks

[@ixoyc12]

Works with Xiaomi Air Purifier 2S. Thank you - you are great :)

[@marko_gajic]

I cleaned my filter with clean water without using any soap or cleaning liquid, just warm water, after that did same reset like on video but just three times beeep, unplugged cabel from wall, plug in again, did three times when got all info on display, unpluged again and it works perfectly, its showing filter 100% so no need to replace it, just wash and make sure its dry before you put filter back on its place

[@Buurbachi1]

Holy cow. It actually worked. You just have to set it up again. Thanks!

[@lalo1088]

thank you for this awsome video, it worked by the first time (3h)

[@iammarkpeters]

Tried it three times and it finally worked Thanks Dude 👍

[@tripathi958]

holy moly it worked not expected , shit man thought i have to spend 2500 inr, now i am just going to clean and re insert filter, thanks bro

[@miloslur]

Tnx, it worked for Purifier 3C.

[@sanakhoori4676]

Genius Thx a lot , I will not buy new filter .

[@imiyuru]

OMG it worked 100% ❤❤❤

[@Pszemko]

It actually worked, thank You!

[@orsonlew6006]

It’s work! Thank you ❤

[@paat82]

I finally found it for Pro H!!! Press the Display button on the front and the Filter Compartment Cover button (!!!) on the back at once for a while and the reset display will be shown. The rest is the same, push Display button, wait until the texts disappear, unplug and replug.

[@mstfinceoglu]

I really found it after my efforts. You're perfect buddy. You are talking about the opening button of my rear filter cover in the Pro H model.

[@ksewo]

Thank you, it worked

[@adrn840]

Myślałem, że jedyna opcja to wyjąć filtr i zmieniać dane z tagu RFID na komputerze 😂 Dzięki mordo! Oszczędziłeś mi czasu na zabawy z tym 💪

[@radbilcz]

Ja robię to inaczej. Pod filtr wkładam folię aluminiową i znów mam 100 procent :) Pisze że mam nieoryginalny filtr ale tylko na początku.

[@S.youtube_t5]

I did it on mine but unfortunately now it keeps going back to 100 percent, it doesn't go below anymore, does anyone else have such a case and how can I solve it?

[@RASHA90SAA]

i found another way to manualy restart just filter scan tag filter with phone and id tag ganerate with program and write comand with ntfc with phone and make him like new :D Not try jet because i buy Mi Air today but will try when get on 0... I found on net some people doing that for 7 euro :) I tink this will work free :D

[@S.youtube_t5]

@RASHA90SAA I reset it for free, everything works fine via the buttons on the device, it takes a few days for it to start reducing capacity, mine is now at 89 percent

[@lescencovladislav2744]

It’s working!!! Thanks🙏

[@alexandrupaviliu1431]

Thanks man!! It's a little complicated but I did it 😃

[@ganeshroy6577]

thx third time i reset my filter. but dont use several yrs. clean filter once 4 months for dust. 3 -4 yrs maximum use one filter.

[@sunzriver3z]

1:03-04 "release the display button and hold" but you release power button.... why?

[@zmiey9174]

I do not really understand to follow the steps 😁

[@saifulsafwan2928]

👍👍👍👍👍👍👍👍👍👍👍It's works

[@BerkUnant]

Yeah! It's work! Thanks man!

[@cimecar1]

It works.

[@hellbirdx]

Hat geklappt beim 3H . Danke

[@belalali3588]

I don't see the point in doing this... You are still filtering your air through the same dirty filter... My solution: do nothing, the purifier is still filtering even though the display says 0%... Simply ignore the display...

[@BlockShade-lr9nw]

It works!

[@Gorky25]

Mine is 3c and I have only 2 bottoms. How can I reset?

[@rayj1988]

Great worked for me!

[@rar7962]

Hat funktioniert danke dafür

[@adsa8037]

Thanks.. Its work

[@robertosetiawan]

it’s work thanks man

[@ardaakyol1800]

It works thank you

[@Pr0grammansage]

Thank you very much.

[@DonzaiNoHana]

What's the point to program it old filter to another 100% ?Just keep using it lol in any case the filter remaining is programmed on number of hours purifier was switched on and at what mode and not actual filter life.

[@IbizaSP]

on the display, 100% looks better than 0% and that's the point :) you can always clean the filter using these methods and after some time you know when you cleaned it.

[@DonzaiNoHana]

@@IbizaSP umm okay fair enough

[@hournownft5599]

worked like a charm

[@achon1771]

Seems like this one suffers from pixel burn as well... I have the Smartmi purifier and the display looks horrible after one year of operation.

[@JAVC1962]

This is how it worked for me with Xiaomi Smart Air Purifier 4 Compact EU Shut off device. Take the filter out, clean at least the primary outer filter with a brush or vacuum cleaner. (Mine was full of fine dust after just one month of use!) Put the filter back Long press Power on touch screen and voilà: 100% 🙂👍

[@miohmontemayor8909]

Works! But device is reset. ;)

[@margad]

working 🙏🏻

[@chicel2010]

Air purifier 3 H albo coś robię źle albo na tym modelu nie działa

[@Dazzman170]

Why make do they make it so complicated? surely the machine can pick up if a new filter has been fitted?

[@srta_martin8]

Me parece muy lioso cómo lo explica él...básicamente tenéis que apretar delante y detrás hasta que hace 5 veces los 3 pitidos, después botón de encender, cuando solo aparece la palabra WiFi desenchufar, enchufar y voilà....al encender saldrá 100 de filtro

[@pinticangabriel]

100% working! Great hint 👍 thx!

[@Marix498]

Few attempts, final succesfull but a little bit different (lasted much shorter to the Final screen) don't know why, but success matters :)

[@miodrag1245]

fantastic. This works perfectly. Do you have instructions for 3C? 👍 from Belgrade,Serbia.

[@aeakdag2]

Aluminium under the 3c.

[@akkarparkiamopas3401]

Thanks for this trick. So the question is why we have to do this as the percentage is showing the filter is supposed to be replaced? And we need the air to be purified as good as it could be in the first place, don't we? That is why we buy this air purifier.....

[@IbizaSP]

correct. the film aims to show how the filter can be reset, in the description of the film I wrote that it is better to replace the filter with a new one because the longer time of using the filter will catch various bacteria and fungi.

[@k3y3sh8]

masz piwo... works

[@YtubeShorts331]

THANKS!

[@rnb4life489]

Hallo, tolle Anleitung aber ich bekomme es nicht hin, kannst du es eventuell als Anleitung schreiben? Danke

[@IbizaSP]

Hallo, ich weiß nicht viel, was los ist, können Sie es klarer machen? "Google translate - sorry"

[@rezzac]

Will try this!

[@IbizaSP]

it works like this on my purifier

[@bincstoresg9850]

What a way to lie to yourself, that the purifier is still at 0%. How is this helpful? What if my grandma believes this BS. 🤣

[@z3ro7o]

Worked for me? So

[@teLmi]

@@z3ro7o but the filter is still on 0%, how can a 0% filter smoke and other particles? ;) i think after the hack it cant clean the rooms completly or?

[@z3ro7o]

@@teLmi if you use it alot with crazy conditions yes its over fast. but we use it all normal. and the owner want you to use it fast so they can sell new filters. 100% works for 2 years

[@doroncojocaru6908]

Not working...

[@IbizaSP]

Try

[@tamaszlav]

@@IbizaSP If he said it doesn't work, he has tried it.

[@IbizaSP]

@@tamaszlav I meant that he should try again

[@f0xfirekiapzkiapz446]

Confusing and too many extra steps resetting.

[@Loutamm]

Logic behind this?

[@szmery2985]

Ciekawe czy działa z XIAOMI Mi Air Purifier PRO?

[@IbizaSP]

Hmm, zawsze można sprawdzić 🙂

[@paat82]

I finally found it!!! Press the Display button on the front and the Filter Compartment Cover button (!!!) on the back at once for a while and the reset display will be shown. The rest is the same, push Display button, wait until the texts disappear, unplug and replug.

[@ixoyc12]

Działa z Xiaomi Air Purifier 2S. Dziękuję jesteś wielki :)

[@LordReef]

You can do it in App Xiaomi Home in only one step 🤷🏻‍♂️

[@bingas]

How?

[@szmery2985]

Czy to jest procedura factory reset?

[@IbizaSP]

Tego nie wiem, wiem że resetuje filtr.

[@sachinyadav007]

Tekken combo moves are easier

[@amamamggggg]

showing full 100% and dirty as F

[@Djops95]

Ага,забитый грязью фильтр😆

[@alamoudimoh]

😂😂😂 there is an easier way

[@yaolmasayd2509]

What is these

[@mykeul888]

So bad music!! 👎

[@IbizaSP]

Click my Video, Turn Off music and turn on XIAOMI Mi Air Purifier.... ;-)