Xiaomi Pro 2 Puncture Repair Part 2

[@craigwflys]

Several years ago for a short while I was a mechanic for Bird and I learned how to do these as I went. These are the exact same tire levers that they provided us with and are a must. I also have my wife help me because you really need 4 hands on the levers. I like your idea about bolting the rim down to the table.

[@gtone339]

Okay I tried to remove the rear tyre off on my old M365 back in 2018 with Spoons, yes it works, and I replaced it with a brand new CSt tyre + tube from Xiaomi. Almost a perfect replacement but I actually butchered the inner tube while inserting the tyre back on lol. Had to bring it to a local Bike store for proper tyre + tube replacement hehe!

[@thebomb363]

Another video to help me get my son's xiamo rear wheel on thks!! It's been a nightmare so far with that bloody wheel.😩😭😭

[@Jyaif]

I spent 4+ hours trying to put the tire back on with regular bike tools and failed. I bought the tools this guy uses, and (with the help of someone) I finally managed to put the tire back on! In the process I unfortunately created a hole in the chamber, so here I am going for round 3.

[@freesaxon6835]

As a very old got of 68 I find your tips excellent, subbed. You should also have links to the tools you use, and make a few Bob that way

[@kooltoyz2837]

Thanks! We will add some links once we decide which tools are the best on the market and stock them.

[@StuermischeTage]

That step at 7:00 looked so easy. It took me over 4 hours to get the friggin' wheel back on. Definitely invest in some long levers for that step or get ready for major frustration. This pro 2 tire change has been the worst ever.

[@ward2471]

1st 😝 well done, excellent detailed video !!!

[@Patiboke]

8:12 At this point it can go on easier if you push the bead on the opposite side to the middle of the rim. It has a smaller diameter there. Not easy, you need brute force, but at the same time you don't wanna touch the inner tyre with the tyre irons.

[@janniejadlik4444]

Thank you man, you safe my nerves. After I read your comment and squeeze the tire with clips, it went inside easy. Thanks again 👍👏

[@xZeroOffical]

There is actually a neat trick (you can find on YT) that will help you mount and remount the tire in mater of minutes with only a moderate effort. It is not supposed to be that hard and it really isn't. Use a pair of wise grip pliers to squash the tire as thin as it safely possible. Use two spokes as a guide. This will allow tire to fit into the center groove on the wheel which will give you additional 3-4 cm to work with, meaning that you can do everything with only a pair of cheap plastic levers. Good luck!

[@Dazpez76]

Fuck it!!!! I’m off to Halfords…🥴

[@lolo7ize]

*me with kitchen spoons* 7:50 :O

[@lolo7ize]

btw my spoons bent and we gave up, we are gunna get more tools

[@telthehitmangames4053]

Wait the pro 2 tires are removed with Allen keys not spanner like older pro 🤔

[@marcjarvis7256]

I got mine off with kitchen spoons. Now to try get it back on with them 😂😂

[@erangasampathfernando2468]

Thank you..👍

[@Duracelbunny]

you are putting the tire back on on from the wrong side. It is much easier from the opposite side of the valve

[@lookmanseedat]

man i watch part one but didn't watch part 2 now i've messed up my replacement tube with came with my pro 2 gonna go halfords and get slime skabs patch the puncture i had on my old tube and new are just little slits

[@marcjarvis7256]

Update, 4x sturdy teaspoons. My hands. The mrs' hands and my big toe. All wrestling in the kitchen floor.

[@Vinkku.]

It's very easy to get new puncture with those levers, better to just use soap, plastic/metal levers and hands.

[@leoshest9651]

And here i am trying to do this shit with a knife and my bare hands... wish me luck.

[@ALDAVINUR]

nightmare

[@boston3096]

I did a lot in my life but this shit fucked me up like aids with supercaner like brooo i swear to god I just throwed my m365 pro 2 in a sea

[@ALDAVINUR]

@@boston3096 i went to a shop. he changed both wheels for 50 bucks.

[@ignorantpom]

Tried this twice and punctured the tube both times ;__;

[@fantomas1498]

He possibly punctured it too with that method, but did not show anymore filling with air.

[@Foxyboy-iv5cf]

Burst the new tube best off taking it to a professional as those tyre iron slice the tube's Also when I tried it it kept popping out the other side. Unless you are professional not worth wasting your time.

[@babyjamielmg8710]

Maybe specify which wheel in the name 🤦‍♂️

[@Foxyboy-iv5cf]

Easy to tell which tyre it is 😅

[@mrmotorcycle9459]

Can't get the tire off the rim fir the life of me

[@brogonbtw]

Oof

[@kooltoyz]

Good or bad oof?

[@brogonbtw]

@@kooltoyz good video but bad how they didn't make it easier to take of the front-wheel