Xiaomi Scooter Pro 2 won’t turn on [Fix]

Xiaomi Scooter Pro 2 was giving me headaches in the middle of the night turning on and off by itself. I explain in this video how to solve two errors I experienced with this scooter .
The first fix is for when the scooter refuses to turn on or off or listen to commands when pressing the main button on the scooter, usually it’s caused by a loose wire on the bottom of the scooter beside the battery. Open the bottom of the scooter. Take out the wire and install it again as shown in the video. It fixed my issues immediately. I suspect due to a lot of shaking that the scooter experiences that this wire will come loose again so I added a very small amount of super glue to the wire connection to keep it locked in place.
Second issue is when the screen is flashing error code 14. This is likely due to the dashboard cable not connecting properly. Take off the dashboard, remove 3 screws and push the cable connection back to correct place. The issue will resolve immediately.
I bought two scooters one for me and on for my girlfriend. Unfortunately hers has been giving me a headache for the past few months so now I am a professional scooter repairman. You are welcome.

[@brunohcg1]

Well, you saved me, I had the same problem, my scooter stuck in S mode and wouldn't turn off anymore, I reset it by releasing the battery cable and the plug in the corner that you showed in the video, thank you very much for the tip

[@Ayywin]

Thanks man, this was exactly what i needed. Exact same symptoms, tried your solution, and BAM!

[@itsmefawzy]

This priblem happened because water got inside the mother board so you should take the motherboard apart and do it with the hairdryer

[@nh8529]

The motherboard of the screen or the actual bottom of the e scooter?

[@ibrahimrzq5048]

its been 3 days that ive been triying to repair it and nothing worked until your video

[@kwagalaedrinahkigozi8460]

This was lifesaving, thank you!

[@hamzaaydin7941]

Thanks! It works.

[@LuckyLuciano42]

I have the same issue with my 1s. I did what you did but it keeps happining and now i cant fix it at all anymore.

[@Dego_one]

if you fix it tell me!

[@wiilu0073]

I had almost the same problem, I had to disconnect the battery for more than 24 hours! because 12h didn't work.

[@mateigalben324]

Thanks! You helped me!

[@spongehighlights7152]

My scooters brake light is always on and the display is always faulty what do you reckon is the issue ?

[@alvinhoxha7934]

Have you fix it please answer I have the same problem

[@spongehighlights7152]

@@alvinhoxha7934 no I’m not sure how to fix it

[@ugur8215]

@@spongehighlights7152 I don't know which brand or model you got but I suggest you to open the battery cover and check out for any water leaks in the battery section. Do the same thing that man has done and if there any loose screws tight them up. Also you can check dashboard for any corrosions, open it and try to clean with alcohol.

[@ugur8215]

@@alvinhoxha7934.

[@TakenByHeaven141]

Is it possible to reset the bms with that battery ?

[@wiilu0073]

I had almost the same problem, I had to disconnect the battery for more than 24 hours! because 12h didn't work.

[@prottaybarua2496]

It helped bro ! Tnxxxx

[@paulnaquin]

What's meaning color blue blinking inside battery pack

[@danijelpetras3856]

How to turn off the block pls tutorial pls

[@LiamKeo]

Need help my scooter fulll run and took the scream wire wat push in together going to the controller like and then push back in together and the scream still not come on like it was all work fine befor i pull wire out like

[@prottaybarua2496]

Broo i did it but today I’m having the same problem! I tried to do the same but its not working its turning on off again!

[@nitotoni2553]

is water problem change dashboard :D

[@yamunaweerathunga2067]

How do you remove those screws

[@videotrippa4488]

LUL ScrewDriver LUL

[@voodoochile7581]

🤪

[@xx-cg2rq]

T10

[@yamunaweerathunga2067]

Thanks guys

[@marguslehiste3763]

did that and also took controller out used ipa to cleen it up used hair dryer ti dry it up and now it works again

[@akasosondu2921]

Please my E9max iscooter, just 1 month ago I brought it but it cannot power anymore only the front and back light keeps flashing, I have given up to 3 mechanics they cannot fix it, one of them says it maybe the motorcontroler I have ordered it from Ali express now its has been fixed but still di same, could this problem be dashboard? Because it doesn't power at all

[@ЕбалсъмВиВсичките]

Change dashboard control

[@elprince5649]

I have a question, if my scooter’s controller light is not even lighting up but my battery is does that mean I have to change the controller itself?

[@olivercbmcman28]

Yes I've had the same problem before

[@Movie_but_for_free]

What should i do whit mine? It shows when i charge it but when i try to turn it on nothing? Can somone help pls?

[@danialskandary3075]

I did what you said but it didn't work

[@anisabidi4653]

Chinese scooter water proof first rainy day u re on KZbin to know it's wet😂

[@danialskandary3075]

I have the same problem No matter what I do, it doesn't work

[@chifishingdk2884]

Volt lose. They Are dead cells

[@patineteslalinea6370]

14 Means throttle problem.

[@Dego_one]

is the same for xiaomi mi 1s

[@wiilu0073]

I had almost the same problem, I had to disconnect the battery for more than 24 hours! because 12h didn't work.

[@JonSnow164]

@@wiilu0073 explain more what problem you had

[@figueiradesousamarcosalexa4787]

De branché la batterie une nuit âpre elle va ce mètre au marché le jour âpre

[@danijelpetras3856]

How to unblock speed

[@只是一个路过的]

my problem was the lcd screen did not shows the data... it only remains the buzzer when button pressed... So I cannot locating the problem was came from the microchip of LCD screen or the controller near with battery

[@pija9505]

Stoorydorinyupthe dubs !

[@pija9505]

Id say the switch but yu seen to have found a lose connection.. normaly shtuff like that.. yu push in the plane wire into connector snag.. but sometime the snag crack off or a bit that has hole the cable.. and you can try grab it into a bit thats left in there.. and shell hold.. har harrr

[@gui76100]

🫶🏿 tu m’a aidé

[@MidNight_KiTTy]

You should use the warranty to get a replacement or other Do not attempt to open anything Even if the warranty is expired

[@Usg1]

That has got to be the gayest thing I’ve ever seen someone comment 😂. Even if the warranty is expired 🤣 a lot of us are handy men who like to take things apart to fix. Just because your useless don’t be giving out bad advice like that to other guys.

[@balls220]

Error 28 plsss help me