XIM Mini Tutorial - Best Anti Recoil Trick

[@XIMCentral]

Link 1 Channel Membership Subscription: kzbin.info/door/JQZlZVwbWQNvgCXK3gCPrAjoin Link 2 Reduce & Control Weapon Recoil: kzbin.info/www/bejne/n2ankJx6YrlreM0

[@dodgeking6644]

Thank you for all the info,more destiny 2 tips please?

[@XIMCentral]

@@dodgeking6644 Use a good SAB value to reduce the aim assist problems (where it pushes you away from the target). Also you may want to use a sprinting config to increase the sprinting turnspeed. I covered most Destiny 2 tips in my updated Destiny 2 config video :).

[@dodgeking6644]

Damn i watched that one ..lol thanks again

[@JADC93]

Will there be a newer tutorial for Siege?

[@XIMCentral]

@@JADC93 Hey, i just responded to your other comment :).

[@hridoyridoy]

can u make a video about explaining synchronize, smoothing, y/x ratio, steady aim, boost and turn assist in detail? How does it work and how it affects the game. thanks everything ur doing fr this community.

[@XIMCentral]

Hey, except for synchronization and XYRatio you can already find dedicated explanation videos for all of these features on my channel :). Here you have the boost video for example kzbin.info/www/bejne/nXmudoKhfrKMi7s

[@RockerxxRicardo]

This actually does help just don't put the ratio way to high because adjusting your aim horizontally can become harder especially in games with fast movement like bo3.

[@gelato578]

I’m here for bo3

[@Claptle]

Gelato ahahahahaha gelato ur a fcking keyboarder omgggg

[@gelato578]

Claptle no i am not

[@Claptle]

Gelato y u here then?

[@noreconcile.34]

@@Claptle No nigga why r u here?

[@SupernovaSun77]

BRO!!! Another recoil trick is to bind your walk button to your ADS button and have it to 12% - 15% and when you ads it will bring down the weapon without pulling g down the mouse. 😳 so amazing.

[@XIMCentral]

Yeah the year0 recoil setup is great, i will soon do a tutorial about it with some refinements and suggestions :).

[@SupernovaSun77]

XIMGameplay yes! That would be amazing. Xim is the best bro. Still learning how to agro with it but it’s not going so well 😂

[@XIMCentral]

@@SupernovaSun77 Stick to it and you will get good. Take notice of your surroundings and use the game information to your advantage, usually its not your aim that gets you killed but reading the map or enemy spawns :).

[@SupernovaSun77]

XIMGameplay very true.

[@kungabhutia2840]

First thing tomorrow gonna re download apex. Thanx my home work is done.

[@MrApexYT]

Thanks for the info sir. I'm going to have to try this!

[@vvsCold]

well yuh this is where it all started with no recoil 😂

[@getsugatenshou6941]

Did it work

[@KokenyRichard]

This is a really great feature, but if you want to shoot with your secondary weapon, than after the first bullet you shoot, it activates and makes it impossible to aim accurately. So U can't shoot with your secondary weapon. So anyone else who has this problem, I recommend to change the y/x ratio in the ads menu/section. That way you still have no recoil, and have no problems with shooting with a secondary weapon whatsoever

[@XIMCentral]

I think the category B setup is the most ideal then as you will have two fire buttons, one you can use for your secondary weapon and one to reduce the recoil with if a weapon has a stronger recoil.

[@jrock6859]

Bruh this shit made my recoil controller so fricking good I luv you

[@JammedToaster]

You can use this with a controller?

[@williamk8221]

@@JammedToaster he meant control

[@kimjaesung5938]

Thank you so much for another very helpful video upload. I have two questions: 1. For the game category 1 like Rainbow, why do we need another configuration? Can we just change X/Y in ADS mode? 2. I play Apex Legends, but I really don’t think I can two different fire buttons (also, my side buttons are engaged with Granade and weapons swap). Can I just change X/Y in ADS and move down even less for the guns with little recoil? Or any better idea?

[@XIMCentral]

Hey, yes you can also change the ADS XYRatio for both games. Some people may not like that though as your HIP and ADS XYRatio will be different then. This can make aiming more difficult. However you can get fully used to that so after a while its no disadvantage. The recoil config only changes the XYRatio while you shoot so it doesnt affect your aiming behavior too much. If you dont have enough buttons for a second fire button then consider to offload some actions to the keyboard. For example the left alt key is an excellent key that most people dont use :). That way you may have another free button on the mouse.

[@kimjaesung5938]

XIMGameplay Thank you for answering. Very helpful!

[@GabrielMwansa]

Some of us don’t use keyboard we use analog so buttons are limited

[@PoeticFPS]

Also I appreciate all these videos your config tutorial for apex legends was a huge help

[@XIMCentral]

Thanks a lot man, really! :)

[@Millennialgamer-c9d]

I just copy pasted his config made some changes in key binding and it’s golden this guy and the product is perfect

[@acejimbo6119]

Like I said in your last video... the fact you put in game example is really great man. Cant wait to try that tonight thx

[@XIMCentral]

Thanks man and i agree, i really have to do that more often! Maybe with the next video (probably Apex Legends Update) i might include example clips for all features! :)

[@acejimbo6119]

I did what you showed us and it's amazing for the recoil but I get a weird aim assist with the auxuliary. Like it's harder to get inside the ""bubble" and I get stuck outside some time when someone is moving left from right. do you have an idea why ? Everything is like your setting.

[@XIMCentral]

@@acejimbo6119 In games with very very strong aim assist this can happen, yes. To prevent that you can add some boost to your recoil config (100-250) or add some steady aim (2.5). Id recommend to go for steady aim first.

[@VaGdude]

Yesss the epic voice and accent is back 🤘🤘🤘💪💪

[@XIMCentral]

xD

[@acquapanna9235]

Hi. Thx for guide and video. Have 2 questions about configuration. 1) How to turn it on while not moving the mouse? 2) If i increase %%, it is working when i am not moving mouse, but when i am moving - it is uncontrollable. Am i right, that i need to choose one choice? What about delay 10ms, Smooth Aim and Deactivation delay. Is it way to fix my problems? Want to use anti recoil not moving, as well as moving, with the same strength.

[@XIMCentral]

Hey, which recoil trick are you using? It sounds like you use the one which utilizes the walking percentage. But the video you commented under is the other very popular recoil trick which works differently.

[@diligaf1000]

Tried this and it doesn't do anything when I tried on modern warfare. Tested in a private match and recoil is not being changed for me. I doubt I'd use it but wanted to test it out

[@XIMCentral]

This feature wont compensate the recoil automatically, you still have to move down your mouse. What this trick does is reduce the distance you need to drag your mouse down to reduce the recoil. If you dont notice a difference then increase the XYRatio.

[@lucadimeglio3339]

sure but when I press the button to activate it and I aim it doesn't shoot me

[@XIMCentral]

@@lucadimeglio3339 So your weapon doesnt shoot? Can you verify that you bound your activation button as the fire button in the anti recoil sub config too at the bottom? If you are unsure check out the second half of the video again :).

[@diligaf1000]

@@XIMCentral oh thanks makes sense now, I've probably learned recoil control through muscle memory so I'd probably find it difficult to adapt now. Good to know about this though

[@XIMCentral]

@@diligaf1000 Yes that most likely is the case, you adapted to the previous situation! :)

[@DjScReZ]

Dieser Trick wäre dann ja auch für Destiny 2 sinnvoll oder? apropos Destiny 2 bringst du bald mal wieder eine neue Config für Destiny 2 raus? bzw was würdest du für 12k dpi und 1000hz empfehlen?

[@XIMCentral]

Hey, meine letzte Destiny Config ist immer noch aktuell, das Spiel hat keine gravierenden Änderungen durchmacht welche andere Settings erfordern würden. Wenn ich ein neues Video machen würde wären die Settings nahezu die selben :). Und ja die Recoil Config funktioniert auch mit Destiny, würde es aber nur mit Waffen die starkes Recoil haben benutzen.

[@DjScReZ]

XIMGameplay ok alles klar vielen Dank für die Antwort

[@adzii4951]

Thanks so much bro this stuff actually worked, I can control Twitch’s f2 on R6 now👍

[@XIMCentral]

Awesome! I think on monday there will be a new recoil tutorial with a completely new trick, you can use that on top of this one for even better results :).

[@adzii4951]

XIMGameplay niceeeee I will be looking forward to that👀

[@XIMCentral]

@@adzii4951 I release the Fortnite Tutorial first so the video will come monday in a week i think.

[@AylicZ]

Or just... practice

[@batuhanbati2344]

You could practise

[@lillarryv350]

Is this one better or the other video you made about binding left click to right joystick?

[@XIMCentral]

Hey, i replied to your other comment :).

[@TheRealGetShutDownz]

Fingers crossed my Bo4 Maddox shot will improve 🤞

[@XIMCentral]

Let me know how it goes! :)

[@Bushido_24]

What's ur PSN??

[@TheRealGetShutDownz]

Bushido GetShutDownz-

[@Bushido_24]

@@TheRealGetShutDownz got u

[@kool7581]

@@TheRealGetShutDownz so, how does it work?

[@remedy-9227]

What does the “Steady Aim” and “Boost” do and do you think those would help with anything on rainbow?

[@XIMCentral]

Hey, you can find dedicated explanation videos on those features on my channel. Here you have the boost one kzbin.info/www/bejne/nXmudoKhfrKMi7s

[@kingritz590]

Remedy - it won’t they’re aim assist options. More for a game such as cod or fortnite. In Rainbow they’re useless and should be left to default.

[@BigMac-wu2kz]

I use the smooth for when I put my ads and hip super high it just makes it so it won’t be so sensitive so moving is smoother

[@waddisbeats]

I hope the xim will work on the PS5 🙏🏻

[@XIMCentral]

Im sure in a few month we will know more about that!

[@koronavirus7231]

Do i understand right ? About Category B. You need activate with whatever button and then you can shoot with zoom without recoil.and after when i wanna shoot without zoom i need disactivate button ???sounds very not comfortable...

[@XIMCentral]

Hey, it works slightly different with category B: You pick an unsued button with which you will activate the sub config. That button will also be your second firing button. Now when you are zooming and want to reduce the recoil you shoot with your new firing button. If you dont want to reduce the recoil you use your regular firing button.

[@koronavirus7231]

@@XIMCentral thanx for answers;)) well i did it.but difference i dont feel...maybe i need try to more strong weapons to feel difference

[@XIMCentral]

@@koronavirus7231 Set the XYRatio to 5,0 and make circular mouse movements while having your anti recoil config running. If you experience eliptical movements in the game then the config is working. Thats a quick test to check if everything is setup correctly :).

[@deeovid]

Hey man. Your videos are awesome and easy to follow along. Thanks for them all. One thing doesn’t work for me is the anti recoil. I followed it exactly but it makes no difference. I then adjusted the x/y on my normal ADS to check if it changed and it still made no difference to the recoil. Can you help please with any suggestions?

[@XIMCentral]

As a test set the ratio to 5,0 and make circular mouse movements, if they turn out to be eliptical then the config works. The anti recoil config will not compensate the recoil automatically, you will still have to move your mouse. Though the amount you have to move the mouse is heavily reduced, thats the advantage.

[@ryeflores5550]

How about modern warfare? What category should it be?

[@XIMCentral]

Id say category B unless you only shoot when being in the ADS mode.

[@daai292]

Yo helpful video, but when I aim down sights and shoot it controls the recoil. No problem with that but even after when I stop shooting if I’m aiming down sights my mouse gets weird movements. Do you have any ideas I can fix this thanks!

[@XIMCentral]

What XIM do you have?

[@daai292]

XIMGameplay xim apex

[@XIMCentral]

@@daai292 All right, you need to install the latest xim firmware (via PC or Mac) to solve that. You can find it in the XIM forum.

[@daai292]

XIMGameplay Okay, Thanks!

[@XIMCentral]

@Vybrs Either turn off your ad-blocker or go with the right click save target as option, that way it should work :).

[@MadaraR6]

What are your senses for siege? And do u barely pull down for twitch or still have to.pull down a considerable amount?...... Also i have booster and ballistic editor will this affect this trick?

[@XIMCentral]

Its 3200 dpi 1000hz sync default and HIP 50 ADS 37,50. With this sub config i have to slightly move down my mouse, maybe a few centimeters. Much less than without the sub config, i can basically control the recoil with just my fingertips without having to move my arm or use my wrist.

[@heavenlyjohn3693]

You use 1000hz off sync with that low of a dpi?

[@MadaraR6]

@@XIMCentral do you humbly have a copy of your config i can kindly use and try out? For Rainow 6 siege

[@XIMCentral]

@@heavenlyjohn3693 Sorry that was a typo, i wanted to write sync default.

[@XIMCentral]

@@MadaraR6 Hey, in the video description of this video you can find a RB6 copy and paste code that also includes this anti recoil trick kzbin.info/www/bejne/j2G7eKulqLJpqdU

[@SupernovaSun77]

Oddly enough this isn’t a joke

[@XIMCentral]

Its not lol, ignore the upload time :).

[@SupernovaSun77]

XIMGameplay 😂 this is so good it’s not funny. Thanks bro!

[@Joshua-ip6nu]

I like your vids! What xy-ration would you recommend for Fortnite? Will you soon come with an update on Fortnite?

[@XIMCentral]

Yes a new Fortnite config tutorial is planned! :) As for Fortnite i wouldnt recommend this trick since most weapons are using weapon bloom and not weapon recoil. Though it can be helpful for weapons like the deagle or the ak. For these you will not need a high value though, something like XYRatio 1,2 to 1,5 should already do the trick.

[@bandogatta3264]

100% Alman 😂👍🏽

[@jan.8886]

Wenn ich X/Y 1.40 nutze, muss ich das dann für HIP und ADS einstellen oder nur bei einem? (Btw like und Abo ist ein Muss!😉)

[@XIMCentral]

Hey, wenn du den folgenden Trick machen willst dann nur innerhalb deiner Sub-Config :). Alternativ kannst du das natürlich auch in deine ADS Config einbauen da Recoil i.d.R. im ADS Modus am schwierigsten zu Kontrollieren ist.

[@jan.8886]

XIMGameplay Okay, also dann nur im ADS, aber im hip wenn man aus der Hüfte schiesst kann es auch nützlich sein oder? Oder hat das Nachteile?

[@XIMCentral]

@@jan.8886 Normalerweise bringt es aus der Hüfte nichts da es dort kein wirkliches vertikales Recoil gibt. Die Schüsse fliegen einfach per Zufall in alle Richtungen, das kann man aber nicht wirklich kontrollieren. Zumindest in RB6 ist das Zufall, in anderen Spielen folgen die Kugeln bestimmten Mustern (z.B. CS:GO).

[@jan.8886]

XIMGameplay okay super!! Vielen Dank 🙏🏽

[@riqxz6154]

Lohnt sich? Den scum apex jetzt noch zu holen für Rainbow?

[@bcgames503]

hello, I could write what you said there in the video, because I don't understand English very much, I would appreciate it very much if you typed

[@XIMCentral]

Hey i do that for every tutorial. In the video description of every tutorial you can find a link to the full english text. Here is the link for this video pastebin.com/Sf7C6LxN

[@bcgames503]

XIMGameplay thanks

[@fredde7356]

Hey, ich hab mir vor ca. einem Jahr eine XIM Apex geholt und hat alles super funktioniert. Heute ist so komplett aus dem nichts kaputt gegangen (der USB Stecker ist beim rausziehen in der PS4 stecken geblieben). Ich würde mir jetzt gerne eine neue holen, finde allerdings keinen Händler der nach Deutschland schickt... kannst du mir helfen? Gruß Fredde

[@XIMCentral]

Bis Mitte April gibt es nirgendswo ein XIM zu kaufen wegen dem Virus. Wenn du nicht warten willst kannst du den XIM Store kontaktieren und eine Reparatur anfordern, das kostet wahrscheinlich weniger als ein neues XIM zu kaufen :).

[@trunkflush2755]

You are a god,good job

[@alexanderamaya6520]

Thanks for the info. Hey, do you know if the fragfx Chuck joystick is compatible with the xim ?

[@XIMCentral]

There are a few fragfx nunchucks that work while others dont.

[@rocoman93]

What a legend 😌😎

[@AylicZ]

That’s a weird way to spell cheater

[@anticarnistvegan]

@@AylicZ Everyone is garbage in the beginning, but you indefinitely.

[@AylicZ]

@@anticarnistvegan higher rank, win/loss, and kill/death ratios but k😘

[@anticarnistvegan]

@@AylicZ We get it, your a hard stuck dust 5 rank.

[@AylicZ]

@@anticarnistvegan “Sundae LCD” is my gt. “LyricDiamond116” is my alt. Look at the stats for yourself :/

[@kameronpeterson3366]

To activate it do you need to press the button every match ? I play apex just wondering or is it just once and ur done

[@XIMCentral]

Whenever you shoot your weapon it will automatically activate, you dont have to press anything in advance or so. Just load the correct XIM game config.

[@kameronpeterson3366]

@@XIMCentral ok but you have said in your video that apex is option b which i would need to use a different button instead of firing

[@XIMCentral]

@@kameronpeterson3366 Yes you use a different button and the anti recoil trick will then only be active when you shoot with that button :).

[@kameronpeterson3366]

@@XIMCentral ok so I should just put it as my shoot button in the first place then correct? Because the button I put on doesn't shoot its just for activation

[@XIMCentral]

@@kameronpeterson3366 In that case it will also activate when you shoot from the HIP, which for Apex Legends might not be that desireable. Your other way is better imo.

[@b.baligod]

hey! idk if you will reply to this but does the windows enhancement mouse setting effect in game settings?

[@XIMCentral]

Hey, my recommendation is to not use that setting, its aim acceleration and will make it more difficult to build up muscle memory.

[@b.baligod]

XIMGameplay will do!

[@essexsouthend]

Can you confirm if this is the best recoil trick out of the 3 recoil videos? i play alot of PUBG and wondered if 1.52 is best for this game or to increase?

[@XIMCentral]

This is imo the best one yes, as it doesnt limit your skill ceiling in any way. The best XYRatio is user dependent, there isnt one best value that works for everyone. Try out a few and check which one you like the most! :)

[@essexsouthend]

@@XIMCentral As usual with speedy replies thank you as always will try

[@xVnmG]

I did everything mentioned.. But there's one issue If I shoot, then let go of my shoot button, but remain ADS'd, it makes my Horizontal much faster until I let go of ADS.. Is there any way to eliminate this?

[@XIMCentral]

Yes you have to update to the latest XIM firmware from 2020 to avoid this, it comes with a fix for this :).

[@xVnmG]

@@XIMCentral do you have a link for this? Just to avoid the risk of downloading a dodgy link

[@XIMCentral]

@@xVnmG Sure man, here you go community.xim.tech/index.php?topic=85503.0

[@whoso5971]

Do you need the most recent update that came out a few weeks for this to work perfectly?

[@XIMCentral]

Do you mean the xim firmware? If so then yes.

[@rickey8947]

I’m a little confused what’s the difference between just putting the y/x up on the normal cod if, what’s the point in putting it on auxiliary

[@XIMCentral]

The approach from the video keeps your XYRatio at 1 while you aim in the ADS mode, it only changes the XYRatio while you are shooting. If you directly change the XYRatio in your ADS config then your aiming feels off whenever you are in the ADS mode.

[@prorolly9054]

Hello, I am a new follower, I have a question, Does the Xim Apex have aim assist using the keyboard and mouse on the ps4 console?

[@XIMCentral]

Yes you have aim assist if the game uses it.

[@prorolly9054]

@@XIMCentral All right, thanks

[@Azadgoli]

Is there going to be a black Friday discount for xim apex?

[@XIMCentral]

XIMs are sold with very small profit margins so there isnt much room for price reductions. Last year there was a discount, but it was only like 10$ if i recall correctly. Outside of that it isnt even clear yet if Apex will be in stock again by then. Official XIM resellers that sell through Amazon and other platforms might offer discounts though, but their starting prices are usually also higher than the standard price in the XIM Store.

[@Azadgoli]

@@XIMCentral was last years discount on black Friday?

[@XIMCentral]

@@Azadgoli I think it was around 5-10$ or so.

[@doccuredmydxpression9573]

I need help, i am extremely stuck. my XIM apex came today, and i dont know how to change horizontal and vertical sensitivity

[@XIMCentral]

With your XIM you dont have to change your horizontal or vertical sensitivity, it will make sure the ratio is always 1:1. If you want a different ratio you can use the XYRatio feature in your XIM Manager to increase the sensitivity of your horizontal or vertical mouse movements.

[@Wafflecombo54]

Is this button a hold type or toggle? If it is a toggle is it possible to change it to a hold on activation?

[@XIMCentral]

It should be hold as that is much more accurate. You can theoretically also do with with toggle but that could result in some sync problems.

[@Wafflecombo54]

XIMGameplay Oh I see now ty!

[@lucadimeglio3339]

sorry i wanted to ask you something if it is possible, I followed more than one video with these figures but nothing works, how come? where is the problem ? Thanks in advance

[@XIMCentral]

Did you follow all the steps? What exactly doesnt work?

[@PHILIPPINEWoRX]

Do you have values for Soldier 76 of OW2? Thank you.

[@XIMCentral]

Hey, since the XYRatio is personal preference there arent any "best values" so to say. Use a ratio that feels good for you id say! :)

[@PHILIPPINEWoRX]

@@XIMCentral I understand. Thank you sir for the reply.

[@jaydale1]

Would this conflict with any Xim settings for ADS such as ADS + Hold Breath?

[@XIMCentral]

I havent tried that but it shouldnt if you use the same ADS + hold breath button binding combination in the ADS anti recoil sub config.

[@iUndeathabLe]

Please help me and answer . What best response rate for xim apex in playstation 4 for apex legends and call of duty mw . My dpi is 4900

[@iUndeathabLe]

My mouse is logitech g502 hero SE

[@XIMCentral]

Its different from mouse to mouse and every g502 is also different. So to find the best response rate you will have to do one of the three benchmark tests from this video kzbin.info/www/bejne/iYG6qKN4bs95l5I

[@liloleme74]

I have a xim4 instead of an Apex, will these settings still work ?

[@XIMCentral]

The XIM4 is missing the sub config priorization update, this may affect how this trick works. You can try it but if your XIM4 switches back into your HIP config when you stop shooting then it wont really work with a XIM4.

[@nathantrick8693]

I have a question. Why make a separate auxillary for this when you can just change your Y/X ratio on the actual ADS? Isn’t it doing the exact same thing? Thanks!

[@XIMCentral]

If you do it that way then you will always have the different XYRatio active when you aim with your ADS button. With the sub config the changed ADS config is only active when you shoot.

[@nathantrick8693]

XIMGameplay Well what I did, was that I just increased the Y/X ratio in the actual ADS config. Wouldn’t that only affect the ADS translation? Isn’t that what the auxillary is doing? :)

[@nathantrick8693]

Oh wait I think I see what you’re saying. So once I start shooting, then the auxillary activates. Nevermind, thank you!

[@XIMCentral]

@@nathantrick8693 Yes exactly, thats how it works :).

[@nathantrick8693]

XIMGameplay Also, I have another question, so I play on a low dpi to not make it obvious that I use the XIM, and at far ranges, the recoil of the gun (for CoD) is strong but the aim assist prevents me from pulling down. Do you think you can help me sort this problem out?

[@bigmasta7377]

do I have to change the X/Y Rate for ADS/Zoom also like the Anti Recoil Ratio? In you case 1.52?

[@XIMCentral]

Only change it for the anti recoil sub config as otherwise your ADS/Zoom will also have the altered XYRatio which might screw up your muscle memory.

[@bigmasta7377]

@@XIMCentral I tried both configs for Warzone, for me the better one is this with subconfig an 1.52 Ratio. The other one is good when your AIM is steady but when you move while aiming its bad because it pulls down... but great tutorial thank you!

[@The-Real-Jami]

what y/x ratio should I use if I have 40-hip, 50-ads in rainbow six siege?

[@XIMCentral]

Without the XIM Sync its hard to say if thats a slow, mid or high sensitivity. What is your cm per 360° ratio?

[@The-Real-Jami]

I have pretty high sensitivity. I don’t know what is my cm per360 ratio.

[@XIMCentral]

@@The-Real-Jami All right, high sensitivity players will not need a very high XYRatio. Try values below 1,5 such as 1,2 or 1,3. Those should give you the required additional control over your recoil.

[@The-Real-Jami]

XIMGameplay Thank you very much.

[@batuhanbati2344]

How does this work? Can i do a "subconfig" for every gun (because every gun has his own recoil) or do i have to play the same gun every round?

[@XIMCentral]

ideally you setup different game configs for each gun and switch between them via the hotkey feature.

[@batuhanbati2344]

@@XIMCentral Oh i didn't know that. So i am able to make a config for each gun and then just switch it when i play?

[@XIMCentral]

@@batuhanbati2344 Yes exactly :).

[@batuhanbati2344]

@@XIMCentral That's cool

[@B88S88]

What's the point of doing this on a auxiliary vs just in the ADS?

[@XIMCentral]

When you do it within your ADS config its always active, so the XYRatio will affect your entire ADS aiming. The trick from the video will only activate the XYRatio while you are shooting. So you can freely aim while in ADS but once you shoot the XYRatio will be there to support you.

[@B88S88]

@@XIMCentral awesome going to try this method. I've been using the method of mapping my fire key to the walk down analog stick set to 10%. I'll remove that and try xy ratio. My issue is that while I'm shooting at a target I'm fighting aim assist bubbles and seen to "bounce" in and out of the bubble with very little mouse movements. I have SAB set to 100% for both hip and ads.

[@louwbotha5293]

I use my left mouse button to shoot, i also use it to drive and when im cooking a grenade.. Will this only activate when i ADS or will it be active whenever i press my left mouse button?

[@XIMCentral]

It depends on which category approach you use, but yes itll always activate as the XIM has no idea in what ingame situation you are.

[@louwbotha5293]

Can i set it to be active only when i ADS or do u suggest i only use my left mouse button for shooting only?

[@XIMCentral]

@@louwbotha5293 Yes thats what the two different categories are for. One will always activate it while the other one lets you choose when you want the compensation.

[@WlSXGE]

Guys, I'm planning to switch from Xbox One to Ps4 Pro. Does Xim Apex also work on Ps4 just as well as it did for me on Xbox?

[@XIMCentral]

Yes but the micro movements are better on Xbox since the stick has twice the resolution. Thats the only difference though.

[@flipggaming731]

Hi! would it be possible to bind the Aux on the same button with ADS? right mouse button for ADS and Aux anti recoil instead of having a diff key bind to make it simplier or will the effect not be the same? thank you sir!:)

[@XIMCentral]

Yes you can do that but then you will always have the changed XYRatio when aiming in the ADS mode (if i understood you correctly). Most people will not like that but sure, its possible and a great alternative if you can get used to it.

[@flipggaming731]

XIMGameplay thanks for the reply!:) yup im fine with it as i always want to have anti recoil everytime i ADS, actually considering binding it to LMB(fire button) if it would also work:)

[@موسىمحمدعمران]

Hey thx for the great video, can I use this on xim 4 ? I’ve been looking for a way to control my recoil for a week now

[@XIMCentral]

Yes but it wont work that well because the XIM4 doesnt ahve the sub config priorization fix. As a result you will always jump back into your HIP config when leaving this anti recoil ADS trick.

[@موسىمحمدعمران]

@@XIMCentral if there is a way to do it please help me out I would really appreciate it

[@XIMCentral]

@@موسىمحمدعمران The XIM4 didnt get the firmware update for the sub config priorization so there is nothing you can do tbh. It works but once you stop shooting it will directly fall back into your HIP config instead of staying in the ADS config.

[@موسىمحمدعمران]

Alright thanks for responding bro

[@tintatonti7974]

I am also using XIM4 for the mouse and keyboard. I think with XIM Apex I can’t use K&M. Too bad for us XIM4 users.

[@tabin2233]

I've updated everything and copied what you've done in the video but nothing happens with the F2 on twitch :(

[@XIMCentral]

Make circular mouse movements while having the anti recoil config active, if your ingame crosshair movements turn out to be eliptical then the trick works for you. This is a quick test with which you can test if there are any setup errors or button binding conflicts :).

[@tabin2233]

@@XIMCentral I just tried it, it was just normal, it's like nothings changed

[@XIMCentral]

@@tabin2233 In that case there might be a setup error somewhere that prevents the trick from working.

[@mohamedelgendy2394]

I appretiate ur effort but plz i wanna know is this trick avalible on pubg ps4 ? Cause i did it and nothing happend ! Still have to do eefort to control the recoil . I hope u answer

[@XIMCentral]

Hey, yes it also works with PUBG. To test if you setup everything correctly set your XYRatio to 5.0 and make circular mouse movements while shooting in the ADS mode, if they turn out to be eliptical then the config is working.

[@mohamedelgendy2394]

@@XIMCentral still nothing happend bro , i play with dpi 10000, synco ( defult), smoothing and boost (0), and i did everything u told me in the video, my mouse red dragon cobra m711, i dont know what to do bro , sorry for disturbing .

[@mohamedelgendy2394]

@@XIMCentral it will be great if u told me the best way to get the best setting

[@koronavirus7231]

I did same like you and now with mouse back button im just shooting...so anoying...i have all smoot everything just fine.from hip also shooting nice.but with zoom i dont get this....i dont know what to do anymore...

[@XIMCentral]

Hey i responded to your other comment.

[@raheeqaljanaa526]

Whats your mouse and dpi?

[@XIMCentral]

Its a glorious mode o with 3200 dpi, you can use this anti recoil trick with any mouse and any dpi though.

[@raheeqaljanaa526]

XIMGameplay ok thanks 😊

[@minizeurminizeur7529]

Salut à toi et merci pour ce tuto. Peut on mettre le tire sur le clic gauche aussi de la souri ou pas. Peut être désactiver la touche de tire hip et la mettre dans celle ci ?

[@XIMCentral]

Yes you can do that for HIP too! :)

[@papipix7496]

Does my activation key for recoil has to be Mouse (back) for apex ? I cant just apply the left click as my activation key for my recoil

[@XIMCentral]

You can use any button that you want to, if the right mouse click is your favourite then make sure that it doesnt cause a conflict with your ads button (as most people prefer to go into ads with the right mouse click).

[@five_5_6ix85]

So, what if I don’t have my subconfig checked to inherit? All of my configs are separate. Does this mean it won’t work? And can we use both anti recoil tricks that you’ve posted, combined? Or just one or the other?

[@XIMCentral]

That means it uses the settings of your HIP config then. Inherit means use the settings of the HIP config.

[@five_5_6ix85]

I understand now. You posted another anti recoil video, as well. Is it possible to use both of these techniques? Or just one of them. Thanks for the response.

[@XIMCentral]

@@five_5_6ix85 With XIM Apex its better to use one or the other. Personally i prefer the one from this video.

[@five_5_6ix85]

It’s not working, I followed the instructions diligently. I think it has to do with the movement checkboxes below. I can’t think of nothing else?

[@XIMCentral]

@@five_5_6ix85 What is not working?

[@sebastianbaranowski2497]

hi, do you know how to set the TITAN TWO so that there is no recoil? Is there an option to set auto aim?

[@XIMCentral]

Hey i responded to your other comment.

[@Dutchy15]

How would you approach the setting on destiny 2?

[@XIMCentral]

For Destiny you would use the second approach from the video as you regularly shoot from the hip as well. For Destiny you can also try to increase the aim assist as the aim assist magnetism will reduce the weapon recoil as well.

[@sbeed07]

XIMGameplay how to increase the aim assist in d2 ?

[@XIMCentral]

@@sbeed07 I did a dedicated video on how to increase the aim assist, those steps also work in Destiny 2.

[@lukmanlukman7850]

What ratio did you use when you did the twitch clip?

[@XIMCentral]

I used 1.52 in that clip.

[@lukmanlukman7850]

@@XIMCentral did you try to combat the recoil? Btw love your vids

[@XIMCentral]

@@lukmanlukman7850 Yes absolutly! This config will not automatically reduce the recoil for you, you still have to move the mouse. What the config does it greatly reduces the distance you need to move the mouse to reduce the recoil, so it becomes very easy. You will have to train it a little bit but then it will be very easy to reduce the recoil.

[@nobodyknows4155]

warum muss man sich erster noch eine hilfs konfig machen ? warum funktioniert es nicht gleich im ADS man gibt ja keine anderen werte ein ?

[@XIMCentral]

Du kannst die Einstellungen auch in deine ADS Config übernehmen, nur dann hast du halt permanent die erhöhte XYRate was eventuell etwas stören kann. Über die Unterconfig wird das nur dann aktiviert wenn du auch am Schießen bist.

[@nobodyknows4155]

XIMGameplay alles klar danke 🙏 irgendwie hab ich immer noch den rückstoß des todes 😄hab alles wie im video erklärt eingestellt. (spiele die saug bo4 )

[@XIMCentral]

@@nobodyknows4155 Hey, die Maus musst du auch weiterhin bewegen, die Config reduziert das Recoil nicht von allein^^. Mach mal Kreisbewegungen, wenn diese wie ein Oval im Spiel aussehen dann funktioniert die Unterconfig.

[@TDrex]

Hey I'm having this issue with mine, I'm quite sure what it is. Basically when I'm aiming on RS6 it feels sorta...sticky...I've properly cleaned my mouse(without touching the sensor ofcourse), I've the new software and xim manager version...I've also made a new config for my RS6 and nothing seems to fix it. It isn't lag or anything with the game since with controller works fine but whenever I try to flick onto an enemy it kinda sticks to the position it previously was then about less than a second later it moves, feels like the reticle or 'mouse' kinda teleports less than a meter instead of being smooth and not sticky and it messes with my precision. Both response rates on the mouse and the manager are set to 1000...also dpi is 12k Not sure if you have a fix or if its a problem with the new update or if I could send you my config but I need help!!!😔😂

[@XIMCentral]

When you click into your config picture what text does it say above? And what console are you on?

[@TDrex]

@@XIMCentral I'm on ps4, it shows the Playstation logo, it shows a target symbol(Xim logo) and then it shows the logitech logo

[@grgsalas]

Try uninstalling your mouse software and install it back again, same with xim software, do a factory reset. This happened to me and I just reset both my mouse and xim and it worked like new again smooth as butter

[@TDrex]

@@grgsalas Do you mean uninstall the driver of my mouse?

[@grgsalas]

@nevuza yeah just uninstall everything that has to do with your mouse and xim and install everything like its fresh out of the box. My mouse uses software to change its dpi and stuff so uninstalled my s pi software and I reset my xim apex through my pc

[@h00d59]

Does this work on the older XIM4? Or only the xim apex?

[@XIMCentral]

It only works for XIM Apex since the XIM4 doesnt have the changed sub config switchting priorization :(.

[@h00d59]

Guess I’ll be ordering a xim apex when they’re back in stock lol thank you .

[@zenistr6130]

It does work on a 4 as im currently using it just fine

[@XIMCentral]

@@zenistr6130 When you go into the top right options and to "info/about", what firmware and manager version do you have installed?

[@zenistr6130]

@@XIMCentral manager firmware 4.00.20160405

[@UnKNOwN-bi8ou]

Hey , I tried this out but made no difference at all on Cold War ?..

[@XIMCentral]

Make circular mouse movements while having the anti recoil config active. If your crosshair moves in an elitpical shape then the config is working. Thats a great way to troubleshoot if the config setup is correct :).

[@UnKNOwN-bi8ou]

@@XIMCentral cheers , I tried adding it to the MJ fame config and when I’m ADS it would move like hip with the mouse ?.. Then on another profile there was no difference in on the oval with it on or off ?.. I will make a fresh profile and try again tomorrow... Cheers Luke

[@Haunttts]

Do I have to put in a ballistic curve in aswell if I have one for ads?

[@XIMCentral]

Yes do that too! :)

[@xxxx-ow3rl]

This was very very helpful ! While ADSing it’s in 1:1 mode and then shooting, makes the recoil very smooth. One question tho, I’m on xim4 and everything works great but, when I shoot, and still in ads, my aim is slower then when I get out of ads and re-ads and then my aim is back to being a bit quicker even tho it’s both the same. So when I ads, my aim is fast how I like, but then I shoot and then kill someone and then try to lock to someone else, my aim got slower. I know that increasing the y/x ratio makes the horizontal slower and if I decrease the x/y ratio it makes it quicker. So I have 45.00 for aim and then 45.00 with x/y 1.52 on anti recoil like you listed. Should I increase the 45.00 on anti recoil so it feels the same when I ads before I activate anti recoil ?

[@XIMCentral]

Hey, could you do the following test for me in a custom game (or a regular game ofc)? Have your XIM Manager right next to you while you slowly go through the different modes. What does it show when you stop shooting in the ADS mode? The XIM Manager should tell you to which config it switches back (it will be either ADS or HIP).

[@xxxx-ow3rl]

XIMGameplay so when I hold the right button (to ads) it says Aim down sight then when I hold the left for the anti recoil, after holding it and I release it goes to “Hip”

[@XIMCentral]

@@xxxx-ow3rl Did you switch the translator mode to ADS in your anti recoil sub config?

[@xxxx-ow3rl]

XIMGameplay yes sir !

[@XIMCentral]

@@xxxx-ow3rl Thanks, i was pretty sure the XIM4 also received the sub config priorization fix but it seems like it didnt. In that case this trick wont work with a XIM4 :(.

[@jrock6859]

One problem I’m having his when I push left click and then try to lean it won’t lean I need help fixing that

[@XIMCentral]

Hey, update your XIM firmware to the new 2020 one via PC or Mac, after that verify that your recoil button bindings are identical to your ADS button bindings (especially for leaning).

[@damiendante790]

does this work it used to but when i came back to the game it didn’t work anymore

[@XIMCentral]

Hey, did you save your config adjustments? Maybe thats why it doesnt work anymore for you. The trick still works in all games that have vertical weapon recoil in the ADS mode.

[@damiendante790]

@@XIMCentral thanks for the reply it’s works now idk why i think it’s because i fixed my sensitivity

[@kylewest123]

Yo XimGameplay, is there anywhere else where you can buy the xim apex because it costs like $300 and most sites are out of stock....pls help

[@XIMCentral]

The XIMs are current out of stock during the virus, more stock should be available mid of April. Then you can buy it for the regular price, id recommend to wait until then.

[@kylewest123]

@@XIMCentral thank you

[@nomaskzo5441]

I did everything you said but I’m still getting it am I missing a important part???

[@XIMCentral]

So you mean it doesnt work? Can you set the XYRatio to 5,0 and do circular mouse movments? Do those turn out to be eliptical in the game then?

[@nomaskzo5441]

XIMGameplay so I put the yx ratio to 5.0 and its still not working🙈

[@XIMCentral]

@@nomaskzo5441 All right that means there has to be a setup error somewhere, maybe a box isnt ticked or an activation button isnt set correctly. Maybe go through it step by step again.

[@Jalebi_waala]

Can i use the fire button for anti recoil? And just deactivate it for hip and ads?

[@XIMCentral]

Yes but then you will always shoot with the recoil button, this may be less effective for hip fire for example (usually low or no recoil).

[@Jalebi_waala]

XIMGameplay yeah i had no choice but to assign a different key, luckily my mouse has alot of buttons on it, will take some time getting used to.

[@XIMCentral]

@@Jalebi_waala All right so its solved when using a different button? That sounds like its the mouse itself then, maybe dirt got under the mouse button (which you can maybe remove).

[@Jalebi_waala]

@@XIMCentral Not sure, but when i switch to common i don't seem to have that issue. so if i use common, can i still use the SAB feature? this gets complicated some time lol.

[@XIMCentral]

@@Jalebi_waala Yes absolutly, but that shouldnt cause any of the problems that you have. I suspect them to happen with common too :(.

[@Machinegatt]

It messes with my vertical sense and it messes me up

[@XIMCentral]

Yes it increases the vertical sensitivity while shooting to make recoil compensation easier.

[@dune4223]

Habe die aktuelle firmware aber bei meine manager version kann ich kein rückstoß oder irgendwas anderes einstellen warum? Kann die app auch nicht aktualisieren...

[@XIMCentral]

Was genau meinst du mit Rückstoß einstellen? Und welche XIM Firmware und XIM Manager version benutzt du aktuell?

[@linsu1561]

what do you personally use?

[@XIMCentral]

I prefer this trick over the one i showed in the automated recoil video.

[@linsu1561]

@@XIMCentral do you always use 1.52 for RB6?

[@XIMCentral]

@@linsu1561 It depends on the weapon, for low recoil weapons (mpx, ump, aug, ...) i use lower values too. Via different RB6 configs and their hotkeys you can switch between the configs then depending on what operator and weapon you play.

[@mambagunner1]

Kann ich Xim apex mit Cronus zen verbinden.Also Xim apex für Mnk & Cronus zen für die Scripts?Wo kann man den Experten Modus Aktivieren?

[@XIMCentral]

Der Zen funktioniert meine ich nur bis 500hz mit dem XIM, bzw. falls er aktuell nicht funktioniert dann benötigt er ein Firmware Update von den Cronus Entwicklern.

[@mambagunner1]

@@XIMCentral ah ok, Vielen Dank für die Antwort.Aber das alte Cronusmax plus würde funktionieren. Oder welches würden sie mir Empfehlen für RS6?Also für Rapid fire & No Recoil.

[@XIMCentral]

@@mambagunner1 Kauf dir lieber einen Titan Two, der funktioniert wesentlich besser mit dem XIM als die Cronus Geräte. Der CronusMax funktioniert z.B. nur auf 125hz mit dem XIM. Der Titan Two hat auch die ganzen Skripte aber läuft mit 1000hz zusammen mit dem XIM.

[@mambagunner1]

@@XIMCentral oke passt vielen Dank!

[@kunaiop768]

Hi, I have a problem i do not got the advanced settings like Steady Aim and the Boost but i already activated the Expertmode

[@XIMCentral]

Hey, see my "Get Missing Features" video on how to get those options! :)

[@MrTacticalGiant]

Can I still use these with the crouch spam video you made

[@XIMCentral]

Yes you can :).

[@kingsmoke459]

So is the back button only for hip fire

[@XIMCentral]

Left click for regular HIP fire and low recoil ADS weapons, the back button for when you want to reduce the recoil in ADS.

[@AhmedAhmed-fk6ri]

If you see my comment, please reply to it When creating a setting, will it work for all types of weapons or every weapon that has special settings?

[@XIMCentral]

It will work for all types of weapons but each weapon might have a different weapon recoil so it may not be useful for all weapons.

[@matthewa5960]

Does this work with other synchronization profiles like common and steady aim already utilized? I tested this and it was incredibly hard to move my ADS left and right.

[@XIMCentral]

Yes it does work with all syncs as well as steady aim. If the left and right mouse movement is too slow while shooting with the sub config then either slightly increase the sensitivity or reduce the XYRatio.

[@matthewa5960]

@@XIMCentral In ground CoDs, a lot of aiming comes through ADS while strafing to make yourself harder to hit in a gun fight, it's been hard seeing the value testing this out. Is there anything you would recommend other than increasing sensitivity/reducing XYRatio? Is there other areas you would focus on in the config for a game like CoD in particular? Thanks!

[@XIMCentral]

@@matthewa5960 In that case try the following. Instead of using the XYRatio use boost and steady aim, this will allow you to still accurately aim left and right while vertical recoil compensation will be easier.

[@matthewa5960]

@@XIMCentral I was using 7.0 steady aim with 3200 dpi and common sync with 500hz pr but I am thinking of reverting to xim4 settings as I cannot find a config that feels right despite the testing on CoD's like MWR, Ghost, Bo3, MW etc.

[@XIMCentral]

@@matthewa5960 Sure you can just turn your XIM Apex into a XIM4 if you prefer its feeling, nothing wong with that tbh!

[@amr_580]

Can you please explain what steady aim and boost exactly do?

[@XIMCentral]

Hey, you can find dedicated tutorials for those features on my channel. They explain these features with example and give recommendations on what values are good.

[@mahgwa3938]

Glad i came across this video

[@maleksawaftah1744]

Can the XIM apex eliminate recoil for a controller?

[@XIMCentral]

That will not work since the XIM only processes your mouse movements with the features shown in this video.

[@ganjacooliyman]

Hello, thanks for the awsome video. Do u have an idear of the max y/x ratio for warzone ? have a good one.

[@XIMCentral]

For any game id recommend to not go above 2,0 since at that point the influence of the sub config while shooting will start to feel off (left and right movements). At that point it might be a better idea to increase the sensitivity of the recoil config too.

[@kimo2667]

When I try to move my mouse accurately my mouse cursor jumps around a lot. This is not because of my dpi nor sensitivity. I have even tried lower sensitivities and dpi's then I am used to. The cursor still jumps around alot, I can literally see it jump 4 pixels while I want to be able to move from pixel to pixel

[@XIMCentral]

Hey, on my channel you can find a "remove mouse stutter" tutorial with a lot of stemps listed in order of their effectiveness. Let me know if those solved your issue and if not, which ones you already tried :).

[@kimo2667]

@@XIMCentral I tried all synchronize options on ads but my mouse still skips a few pixels.

[@XIMCentral]

@@kimo2667 Did you also try the other shown steps? If so what was the outcome?

[@kimo2667]

@@XIMCentral I tried smoothing aswell, the version seems alright. I lowered my polling rate to 500hz just in case. I use a dpi of 3500. I use the corsair mm100 mousepad and the steelseries rival 3 gaming mouse. Not sure where the problem exactly is.

[@kimo2667]

@@XIMCentral nevermind mate, apparently adjusting my in-game joystick deadzone did the trick. Thank you for the fast responses and the effort 👍

[@dillon3679]

can you use xim apex mods for controller use and not a mouse? like i wanna use them for my controller on cold war, is that possible?

[@XIMCentral]

Not all XIM features work for the controller too which is why i would recommend you to get a Titan Two instead as its better for using purely a controller.

[@dillon3679]

@@XIMCentral ill look into it. Trying to figure out why my mouse isn't working on xim apex. And my nav controller is saying not supported

[@PoeticFPS]

Anyway to reduce horizontal recoil. I’m not sure if you really play siege like that but I’m trying to find a way to reduce elas recoil

[@XIMCentral]

The horizontal recoil in Siege is mostly random (Ela for example). Only a few operators have fixed horizontal recoil such as Maverick or Nomad (the AK). The fixed horizontal recoil is usually rather small compared to the vertical recoil then so once you got used to dragging down the mouse at the right time you only need to slightly adjust for the horizontal one. What i want to say is focus on the vertical one first and after that get used to the horizontal one. For example the fixed horizontal recoil of Nomad (AK) only kicks in after like 5-7 shots so i wouldnt priorize horizontal recoil reduction until you mastered vertical reduction.

[@kevinthefatfob4803]

Hey I know this is a old video but I have done this but as soon as I shoot my sensitivity goes crazy until I un ads

[@XIMCentral]

Hey, check if the sensitivity in your anti-recoil sub config matches your ADS sensitivity, and if the translator in that sub config is set to ADS.

[@Nagunai]

Sorry to disturb you , but today i tryd to make a Building Macro for Fortnite but it`s not working my R2 and + L2 for Floor and Stair are binded to my Left and Right Mouse button but for some reason it`s not working since i read in the Internet that it`s not possible to record mouse clicks using the (G502 Heroe)... Is there any chance to make it still work? Playing on Ps4

[@XIMCentral]

Console games usually require a minimum sleep time in-between button presses. Same goes for the activation time. Go with 25 milliseconds or more if you want reliable results in the game. You can set sleep times in the logitech driver for your macro.

[@Nagunai]

@@XIMCentral Yes but the thing is that for some reason idk if the Xim is not registering the Mouse clicks... I just build my Macro but it only registers Buttons like AWSD and stuff but the Xim is not runing Mouse Clicks Like Left and Right Mouse button and these i need to build A wall or Stair. Even if i Put manually commands for the right and Left Button click it still doesnt work for some reasons.

[@XIMCentral]

@@Nagunai Those buttons have a different priority in the driver and the mouse, you will need to use different mouse buttons for your macros. This is a general problem with macros and that mouse. Rebind your DPI buttons for example to key k and u and bind those two to the same actions in the xim manager.

[@Nagunai]

@@XIMCentral I think i let it like it is because i do really not understand it :/ sadly...

[@Nagunai]

Is there any chance to contact you over Discord or so?

[@s_k5378]

I have a few questions 1) Does this work on xim4 2) If so how can I apply anti-recoil for the xim4 I mainly play MW so if you have any idea I would really appreciate the help. I don't think it's possible to replicate the same settings that you're using for the xim apex for my xim 4. Also Thank you a lot for your tutorials you're very helpful and never disappoint . Much Love

[@XIMCentral]

Hey, it doesnt work with a XIM4 since it lacks the specific sub config switching update. What you can do though is to raise your XYRatio in your ADS settings, while that is not exactly the same its the closest you can get on a XIM4 when you want to easier to control weapon recoil.

[@brayw.7109]

Hey, it seems I don't have the "deactivation delay" part of the page when I go through like you do. How do I fix this?

[@XIMCentral]

Hey, on my channel you can find the "Get Missing Features" video which will show you step by step on how to get that option :).

[@AwesomeTG]

I’m champ I’d recommend just learn the recoil it throws off aim so much