XIM Apex - Secret Aim Assist Settings From Alpha Testers

[@XIMCentral]

Link Channel Membership Subscription: kzbin.info/door/JQZlZVwbWQNvgCXK3gCPrAjoin Link MJFame Config: kzbin.info/www/bejne/fYmrfKtveN17Y7c Link Conversion Sheet: community.xim.tech/index.php?topic=94066.msg843845#msg843845

[@felipemelo2093]

I'm Brazilian and I don't understand English, I'm using Google translator, how much dpi and what sensi in the game do I use with this setting? 

[@XIMCentral]

@@felipemelo2093 Hey, i replied to your other comment :).

[@a-pwh]

@@XIMCentral I was wondering what dpi should I use for the settings in the video Rainbow six siege competitive config?

[@guillaume5128]

@XIM CENTRAL MJfame with the xim at 250HZ feel really to faste, i think the MJ configue can't work with 250hz , only work with 1000hz

[@XIMCentral]

@@a-pwh Hey, i recommend 3200 DPI for those settings! :)

[@XIMCentral]

Let me know if you want to see more "secret" stuff that the alpha testers use/used that never really became popular for whatever reason! :)

[@teamblaster257]

yes

[@stefanandreismarandache3061]

Is this available also for Siege?

[@XIMCentral]

@@stefanandreismarandache3061 You mean this trick? RB6 doesnt have any aim assist so you wouldnt get any aim assist benefits by using these settings.

[@Apex-ps2ku]

Yes please

[@brandonpetriw4169]

Yes

[@s_k5378]

The results were really unexpected. It is definitely noticeable how smoother your aim turns out to be. Very good work man we really appreciate it.

[@XIMCentral]

The Synchronization Tutorial which should be done in 2 weeks will further explain why this feels so different. For the most optimal mouse movements with minimal lag you can for example use Sync Off and 500hz. It will have way less mouse stutter than Sync Off with 1000hz but will feel just as responsive. Thinking back it still amazes me that settings like these never became mainstream or widely accepted/known.

[@s_k5378]

@@XIMCentral I honestly never expected these settings to work. Also would you recommend it to Overwatch Expo or Linear?

[@XIMCentral]

@@s_k5378 I would recommend exponential for the better micro movements. Unless you play heroes that dont require any accuracy then exponential is currently the way to go for the best mouse movements and aim assist.

[@nickking3524]

Which one/ones did you use

[@barretmiller2399]

Just want to say that I applaud you for answering the same question over and over about whether the mouse polling rate needs to be changed as well. People should really read the comments first.

[@XIMCentral]

Haha true, but each comment helps to boost the KZbin Algorithm so i dont mind answering reoccuring questions! ;)

[@modsquadau]

It's not really "secret knowledge" to us alpha testers (I'm antithesis). It's just that we didn't have Sync during testing (it was added a few months after launch), so Response Rate was more important during the early days of APEX as it directly affected Sensitivity. I used 250Hz instead of 500 or 1000Hz for a few reasons - 1. The native USB polling rate of PS4 and Xbox One is 250Hz (same for PS5 & Series X). It made sense to use the same Response Rate on XIM APEX to "sync" with the console. 2. I could feel a big difference between 125Hz on XIM 4 and 250Hz on XIM APEX, but not much difference between 250Hz and 500 or 1000Hz on APEX. 3. TItan Two during its alpha testing didn't support XIM APEX at 500 or 1000Hz, so I was forced to use 250Hz at max when combining both devices. A lot of XIM users make the mistake of trying to get APEX to behave like PC mouse & keyboard, when they should be making APEX behave more like a controller. That's what the console expects and games are optimised for controller input. We found out pretty quickly that higher Response Rates of 500 & 1000Hz didn't really offer much precision or response advantage over 250Hz, while also reducing aim assist. But XIM users were obsessed with 1000Hz ("faster" = "better"...right?), so you'll find posts from us advocating 250Hz over the years, but they never gained much traction until recently. That and using Sync Off means one more calculation when adjusting Sensitivity...it's just easier to bang Sync on Default and Response Rate on 500Hz (a good compromise that works well for all games, offers responsive mouse input, minimises jitter and doesn't cause audio issues or frame drops on Xbox) and call it a day. I'll add one more tip to Od1n's video - drop in-game sensitivity a notch or two from the top for more AA. XIM Smart Translators are trained at max in-game sensitivity for the highest possible precision, but there's little to no negative effect of reducing game sensitivity. I do this for every game and it's never hurt my aim :) Finally, ditch the keyboard and get an Azeron or Nav controller - analog movement makes a big difference to AA and it's a tonne easier to configure wheel menus. Simulate Analog Behaviour can help with left-stick rotational AA, but wheel menus are horrible to configure using WASD and a mouse.

[@poppagotacheck1872]

you’re the best

[@XIMCentral]

Guys this is the person aka mastermind you all have to thank for discovering these settings a lot of years ago! :)

[@modsquadau]

@@XIMCentral you give me too much credit Od1n. We've all done our bit to contribute something to XIM devices over the years, you more than anyone. I'm just glad to be part of it and can't wait to share new stuff :)

[@XIMCentral]

@@modsquadau I wasnt sure if i should mention you by name or not, i suspected the video to become quite popular and people would probably write you plenty of forum PMs then. Everyone dont forget to subscribe to the ModSquadAU KZbin Channel, you might see some good content on that channel when the new XIM device comes out! ;)

[@nanexxvii]

Thanks for all! Which polling rate you use for the mouse?

[@rainsinz]

I'm big on the forums for making Apex Legends configs. I can confirm this does work. The aim assist is super strong so aiming feels "lazier". Before when I try 250hz with the other syncs it just wasn't good but with Off sync it works.

[@XIMCentral]

Hey Maria, the next tutorial will explain for why Sync Off behaves differently than default or common on that polling rates! ;)

[@rainsinz]

@@XIMCentral I can't wait for the video!

[@battle-peachl8881]

@@rainsinz I tried common with 250hz on apex-legends. With 7-7 and with alc. The problem is that it isn't consistent with common. One day it feels like Aimbot and you lose because you hit every shot. No 7dmg shots with pk min. 80. On the nect day you feel a delay and you make 0 dmg round for round. I tested it for days in pc lobbies and when you want to use 250hz sync off is the only way.

[@Xdeathslinger]

@@XIMCentral can this work in overwatch because there is no aim sit down in this game?

[@XIMCentral]

@@Xdeathslinger Yes it does! :)

[@bigmasta7377]

I had micro movement problems before, I thought its my mouse that is broken (Logitech G303) now I did this and it feels 1000 times smoother (tested on warzone) really surprising how big the differences is... thank you Od1n, as always, great job! ;)

[@XIMCentral]

Happy to hear that man! :)

[@nanexxvii]

also improve your aim?

[@Sloanjr507]

This is what I’ve been looking for for so long. The game feels so much more smooth.

[@XIMCentral]

Happy to hear that you like the settings! :)

[@chieff666]

what mouse and dpi do you use?

[@XIMCentral]

@@chieff666 I use a glorious model o with 1800 dpi at the moment but this trick will work with any mouse and any dpi range :).

[@chieff666]

@@XIMCentral okay thanks

[@Sloanjr507]

@@chieff666 I used 3200

[@caanterr6581]

I saw the recoil video and I have gotta say, I’m impressed with it. Great job!

[@XIMCentral]

Happy to hear that the videos are useful! :)

[@ishmnk]

Send me link bro

[@caanterr6581]

@@ishmnk just look through his page dawg

[@dazu681]

The voice is so much better than it was previously

[@michaelmehaffy7367]

You need to make the ultimate guide to XIM Settings for Apex Legends guide! Then cod, etc.... that’s what we NEED!! I’d personally give you $100 to make it 😂

[@XIMCentral]

I already did that for Fortnite and RB6 already, Apex Legends is probably next! If you want to support the channel/video creation then maybe check out the channel membership :).

[@nanexxvii]

@@XIMCentral also Cod Warzone need it :)

[@JayDeeFrm7400]

@@nanexxvii true the MJFame config is getting a little on the boring side

[@iceagex]

Hooly crap!!! I've just tested it in 1 game and the difference was amazing!!!!!

[@XIMCentral]

Happy to hear that! :)

[@sieferswe]

Just tried this in BFV and I'm definitely feeling a more normal AA feel when shooting. Thx

[@XIMCentral]

Awesome to hear man! :)

[@DirtyxLarry]

What are your in game assist settings at?

[@3d_dos452]

What sync in bfv??250hz???

[@sieferswe]

Soldier aa = 20% Soldier aim assist snap = 0% 250hz polling I am experimenting atm with setting since I'm not actively playing BFV any longer.

[@fox_au8908]

Hey mate great video. I like the new voice lol. I know the xim was never designed for PC but it does work . could you do a recommended settings video for using on pc ?

[@XIMCentral]

Hey, this trick should work 1:1 on PC too though i could see 500hz Sync Off also be a great choice especially if you play with a monitor that offers more than 300hz! :)

[@fox_au8908]

@@XIMCentral thanks my dude , could you suggest a st, from reading on xim forums the 2019mw aim mechanic doesn't work well on pc , people recommend MW remastered?

[@XIMCentral]

@@fox_au8908 Hey, on PC the key is to use an Xbox Controller as it results in better mouse movememnts on PC. Also always use the Xbox config then. As for the ST, im not sure which one works best on PC sorry. But CoD STs are usually very close to each other as the game developers barely change the aiming mechanic across different titles.

[@fox_au8908]

@@XIMCentral thanks mate . appreciate the help . dropped a 12 kill wz win fist time I tried my config on 250hz 👍

[@XIMCentral]

@@fox_au8908 Congrats man, happy to hear the settings work out so well for you! :)

[@dooomlerno720]

Omg now I understand why my teachers had me doing addition in my head!

[@lordlouis9931]

Love it❤️ keep them coming really excited for the new XIM release as well

[@hadaarshad83]

new Xim? is there a wait list?

[@GX-SYR]

Thank u for the fantastic information 🤩 bro do I need to change both mouse and the xim polling rate to 250hz or I need only chant xim on app and leave the 1000hz on mouse? and should I use steady aim or just put it on 0

[@maneitinodial593]

250hz on the app keep it at max 1000hz in mouse software

[@XIMCentral]

Hey, its sufficient to only set the XIM to 250hz, the mouse can run on any profile that is equal or higher than 250hz! :)

[@GX-SYR]

@@XIMCentral thank u for answering bro 🤩 but what about the steadyaim should I have it on 3 or change it to 0 and u don’t use smooshing when u use off u don’t get any stutter?

[@亦謙]

I have three ideas for Apex Legends , could you tell me which one is better? The first is using this config to Apex Legends ST4.2 ; The second is using this config to Apex Legends ST4.3 ; The third is using MJFame config to Apex Legends ST4.2 or ST4.3. THANKS A LOT.

[@XIMCentral]

Hey, i would recommend to use the first of the three options for Apex Legends! :)

[@Bak7ii]

The artificial voice is on fire🔥🔥

[@gravegrrl]

Just want to say I appreciate your help so much, I wouldn't have of made it anywhere without you!

[@XIMCentral]

Wow thanks a lot of the kind words and happy to hear that the videos are helpful! :)

[@Franciscoxds]

would the 250hz be benificial also on pc and on xim matrix when compared to 1000hz?

[@XIMCentral]

If your intention is to improve the AA then yes!

[@maneitinodial593]

Brother you said after two weeks you'll reveal another aim assist It would be great if you can combine that future video and all previous aim assist MHj confiq etc and make the ultimate all in one video merging all those tutorial into an Ultimate best aim Settings 😂 i cant wait to apply it for apex pubg rb6 etc

[@XIMCentral]

Not a bad idea tbh! Might actually do that! :)

[@nimasazesh2761]

should we change our mouse polling rate too?

[@XIMCentral]

As long as your mouse polls on the same rate or higher then no, you dont have to :).

[@Defixings]

Do i change the polling rate on my mouse aswell?

[@Hector-bf3hk]

Keep your mouse hz high as possible just change it in app.

[@XIMCentral]

Yes exactly, as long as your mouse polls the same or faster than the XIM you are fine.

[@msaib308]

Thank you man for all the videos you’re doing here to raise our knowledge about the xim! Just one question: I use MJFrame conf at max sensitivity and sync off, what would be the changes to apply?

[@XIMCentral]

Hey, yes you can use the MJFame Config on top of this trick. For that just incorporate these settings into your MJFame config and then adjust your overal mouse sensitivity via DPI or the XIM Sensitivity. Dont change the MJFame curve itself.

[@msaib308]

@@XIMCentral thanks man! You rock!

[@MrArraiga]

Thats the Cherry on Top of MJfame imo

[@yayabitesyou]

Fühlt sich überaschend gut an in Overwatch, dickes danke geht raus

[@XIMCentral]

[@Xavaji]

Welche settings benutzt du?

[@Habanero212]

I like your accent. To hell with the haters. Accents are awesome.

[@XIMCentral]

Haha thanks for the feedback man! :)

[@KINGBEN-wp8so]

Bro thank you for sharing this with us. I have adjust my settings to this and the aim assist felt crazy. Keep the great work.

[@erfanebham9780]

Is it work for apex legends?

[@KINGBEN-wp8so]

@@erfanebham9780 Yes I have test it and the aim assist is more noticeable now.

[@erfanebham9780]

@@KINGBEN-wp8so can you please paste your setting for me with this trick bro😇

[@XIMCentral]

Yes it works for all games (assuming they have aim assist!).

[@battle-peachl8881]

@@KINGBEN-wp8so I use your settings. Tomorrow I will try this with sync off and 250hz.

[@bobricard1856]

Merci beaucoup pour tes vidéos ! Merci beaucoup pour ton aide et surtout pour la traduction qui facilite tout !!!!

[@XIMCentral]

Happy to hear that both was helpful! :)

[@eliktooms9924]

Qu est ce tu racontes ya aucune traduction FR

[@XIMCentral]

@@eliktooms9924 In the video description of each tutorial on my channel you can find a pastebin link for the full english text. You can use that text with a translation software such as "deepl.com" ;).

[@AtlSamuel]

Give us more secrets!!

[@XIMCentral]

Next tutorial will unveil some more secrets! :)

[@anonymousltx48]

Lol that's so funny I saw your comment here 🤣 I'm barely seeing this vid

[@AtlSamuel]

@@anonymousltx48 we need them secrets broooo

[@anonymousltx48]

@@AtlSamuel True 😆

[@cr4zzy599]

So to have a better aim which is better, the synchronization off or slow

[@XIMCentral]

For this particular setup (250hz, aim assist maximization) sync off would be better. With sync slow it would be too unresponsive.

[@jokeriq4369]

Many thanks Should I lower the polling rate of my mouse from 500 to 250 Or no need for that ?!

[@XIMCentral]

Hey, as long as your mouse polls on the same rate or higher then no, you dont have to :).

[@joshconner6473]

For games with no aim assist would you suggest still trying this as you mention the console expecting 250hz and off sync would it still feel better than running 500hz on default? Thinking of Pubg for example

[@XIMCentral]

Yes i actually would, the next tutorial video will go into more depth on that (synchronization tutorial).

[@joshconner6473]

@@XIMCentral will give it a go and looking forward to the synchronization video it’s always confused me and have found after playing around that default usually feels good. Love your work as always 👍

[@user-jdr93q8yer9g]

This is interesting not only for xim users. If most console games only "understand" up to 250 Hz input, this means all 1000 Hz "pro" controllers are harming your aim assist. I've noticed my aiming feels off in shooter games with my Razer gamepad after switching from the stock XBX controller. Part of it seems to be because of the higher response rate, but sometimes I feel my AA is turned off, even though I have it ON in the game settings. PS. What's the status on the the new xim device?

[@XIMCentral]

Yes i thought about this too, but i never really did a comparison to confirm this. So thanks a lot for your experiences, thats very interesting to hear! The new XIM device will probably be unveiled in July, ill cover that with lots of videos of course! :)

[@c.s4428]

Nice Video❤️ thanks xim👍

[@vincentv9338]

Thanks for the video and the idea. What should change my mouse polling rate to be or can it stay the same. I have it set to 1000hz right now.

[@XIMCentral]

Hey, for this trick you can keep your mouse on 1000hz, this is perfectly fine!

[@brian2.078]

@@XIMCentral this is very strange to me because the app usually tells you that the chosen polling rate needs to match that of your mouse.

[@XIMCentral]

@@brian2.078 Your XIM Manager will only display that message if your mouse polls below the XIM. It is perfectly fine to have your mouse poll hat a higher, or the same rate. However you cannot put your mouse on a lower polling rate as that will cause mouse stutter then. This is why the XIM shows you that notification then.

[@BetsBestBits]

Thank you, much appreciate 👍🏻

[@Eworcode]

Can you use an aim booster curve with this or will it mess it up ?

[@XIMCentral]

Yes you can absolutly do that, it will not mess up anything! :)

[@revelation2120]

thank you very useful information

[@XIMCentral]

Happy to hear that you liked the video! :)

[@quintonmikula8602]

Hey! Thanks for another great video. I have a question that I was hoping you could help me with. I watched your video on aim assist which basically states that off sync decreases aim assist while default to common to slow progressively increases your aim assist. Is this setup an exception to that rule? I always play with 250Hz, so would changing my sync to default or common still increase AA? Thanks

[@XIMCentral]

Yes this is an exception since you play on a much lower polling rate. What you said is still true but refers to when you run 500hz or even 1000hz. By using sync off with 250hz you basically play with the same inputs per second as the game has been designed with, hence the aim assist works just as it is intended to :).

[@snoofyf3157]

MJFame's configuration is based on 1000hz polling rate, 20 smoothing and a hip / ads value of 500 and the sensitivity adjusts with care. being the synchronization OFF, if I reduce the polling rate to 250, I have to divide by 4 all the values ​​(hip / ads -> 125 smoothing -> 5) ??

[@XIMCentral]

Yes exactly!

[@Millennialgamer-c9d]

Quick question do we also need to change mouse polling rate from our pc or just the xim apex device ? Like if we set 250hz from the device and our mouse have 1000 hz do we need to change it or no

[@XIMCentral]

Hey, as long as your mouse polls at the same or a higher rate than the XIM you dont have to change anything :).

[@Xyxyxxxxxxxxxhtr]

Bfv finally feels good!!!! Well done man !!!!!!

[@XIMCentral]

Awesome to hear man! :)

[@j05hh86]

are you on xbox or playstation? What are your settings?

[@Xyxyxxxxxxxxxhtr]

On Xbox

[@Xyxyxxxxxxxxxhtr]

>>> XIM APEX [Battlefield V] START COPY >>> X5C: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:X5C

[@Xyxyxxxxxxxxxhtr]

4K dpi

[@КааМудрый-ф1л]

Hi, so I'm trying to lower polling rate from 1000 to 250 . I already had Sync Off. What are calculations from 1000 to 250? Thanks

[@XIMCentral]

Hey, divide your sensitivity by 4 when going from 1000hz to 250hz with sync off :).

[@КааМудрый-ф1л]

@@XIMCentral thanks. I should have figured it out lol

[@convercityy-4566]

Should i also change my mouse polling rate ?

[@XIMCentral]

Hey, as long as your mouse polls at the same or a higher rate then no, you dont have to.

[@ramynasser8510]

what is the DPI used on the mouse for Logitech 502G hero and should we change the HZ on the mouse as well ?

[@XIMCentral]

Hey, you can use any DPI value with this trick and the mouse polling rate should be equal to the XIM or higher :).

[@rafalonso13]

Hi, if I’m using the Xbox series x , which synchronized settings should I use for fortnite , default, common, slow or off ? Thanks for the help

[@XIMCentral]

Hey, see my recent upload "Competitive Fortnite Config" for that. It also shows a lot of really powerful tricks to help you with building and editing :).

[@montyscodmoddingservice74]

Would this be better if I used a dpi of 4000? Would the aim assist be stickier?

[@XIMCentral]

Yes DPI can be added on top to get even more aim assist (or to further adjust it in general).

[@3d_dos452]

I do not understand the video, in bfv what would be the configuration for the common synchronization? What would be the ideal values ​​for a good aim assist?

[@XIMCentral]

Hey, for all games the settings shown in this video apply. You dont have to derive or adjust anything based on the game you play. Its 100% the same settings across all games :).

[@Sohikun]

Quick question What if we connect xim apex via the usb c port of the ps5 through a usb c to a usb adapter 3.o Would that reduce the input delay by any chance??

[@XIMCentral]

Hey, the PS5 offers a maximum polling rate of 1000hz which the XIM Apex also supports. So a USB C port would not offer any benefits here since the XIM is already running at the lowest possible delay (1 millisecond)

[@damarine2008]

Do you need to change the polling rate on your mouse as well?

[@XIMCentral]

As long as your mouse polls at the same rate or higher than the XIM this is not necessary.

[@Swaste-rp3dn]

Hey thanks for the vid. Just 1 quick question do you need to change your mouse also to a poling rate of 250 hz. You said in previous vids that the poling rates should be the same. Thanks.

[@XIMCentral]

Hey, its sufficient to only set the XIM to 250hz, the mouse can run on any profile that is equal or higher than 250hz! :)

[@Swaste-rp3dn]

Thanks.

[@vincentv9338]

@@XIMCentral Can you please share with me where you found the conversion table between the polling rates. Ive only seen tables which do not mention the polling rate.

[@XIMCentral]

@@vincentv9338 Hey, it should be linked in the video description.

[@princessazula6161]

Halo, should I use steady aim value with this combined with MJFame setting?

[@XIMCentral]

If you like the effect of steady aim then sure, you can do that :).

[@iiNexus]

So does this mean you should run 250 Hz consistently? Even when there’s a game without aim assist?

[@XIMCentral]

Yes you can absolutly do that, and these settings will feel excellent in non-aim assist games as well! Next tutorial will be a synchronization guide which will explain the whole idea of this "250hz Sync Off" in more detail!

[@Sorothos]

If I use XIM Apex + Titan Two, should I use 250 Hz on Titan Two Output Protocol aswell?

[@XIMCentral]

Yes i would say so, but im not a Titan expert so maybe check back with the Titan forum on that.

[@brandoncampbell6027]

Should I leave simulate analog behavior on or turn it off?

[@XIMCentral]

That depends on the game, in most games a value of 0 is ideal. For more infos see my Simulate Analog Behavior tutorial video on this channel.

[@leax7485]

Is Off sync 125 hz basically the same exact thing as default sync? Same aim assist, feeling, etc...?

[@XIMCentral]

Sync off 125hz is pretty much the same as sync default 1000hz, yes.

[@fabiomazzuccato3973]

Hello.! So, both mouse and xim need to be at 250hz? Thank you

[@XIMCentral]

Hey, as long as your mouse polls at 250hz or higher you dont have to make any changes.

[@xdocxs8239]

I have a xim and play on Xbox one s and I want to buy a series s just want to make sure it 100% works on the series s. I’ve seen a bunch of videos on the series x but none one the s

[@XIMCentral]

Hey, the Series S and Series X are exqual in regard to the XIM, so just update it to the latest Beta Firmware and you are good to go! :)

[@SonictheNinja]

I use xim to play with a mouse and controller at the same time....if I use xim on pc- do I need to use 250hz polling or is that only console?

[@XIMCentral]

Hey, i havent tried it myself but lots of users reported a similar behavior on PC, so 250hz can also be beneficial on PC. Id say give it a try and compare it to your normal settings :).

[@MrTinribz]

Will there be any benefits doing this if play on PC?

[@XIMCentral]

A lot of viewers have reported this to work on PC as well! :)

[@Pejx]

can i go with 500hz on xim ? or should be 250hz

[@XIMCentral]

You can also go 500hz if you want to. For the maximum effect go 250hz though!

[@PHELIPE5004]

Good Morning! all in? very good settings. but what is the dpi and mouse rate for these settings?

[@XIMCentral]

The DPI value can be used to further adjust the aim assist. As for the polling rate see your other comment, i replied to that one too.

[@kaz7466]

@@XIMCentral to clarify he wants to know the exact DPI & Polling rate you are using alongside these settings and so do i :)

[@XIMCentral]

@@kaz7466 Hey, i just replied to your other comment! ;)

[@jessefunk627]

Can I leave my mouse at 500hz and just change xim manager to 250hz and get same results ? I believe you said its fine i but I wanna make sure

[@XIMCentral]

Yes you can do that, as long as the mouse polls at the same or higher rate you are fine! :)

[@SheLikesAki]

@@XIMCentral does you mouse polling rate has to match the 250hz or just the app

[@Tomanator73]

Just awesome, thank you.

[@kaz7466]

what DPI are you using for this config? 3200 dpi still? or are you now on 1800 dpi like it says on the xim forums?

[@XIMCentral]

Hey, this config can be played with any DPI value. By changing the DPI you can further tweak the aim assist, which is why i didnt give any recommendations here. So everyone can further increase/decrease the aim assist if necessary.

[@jawwzgaming8498]

Does it work with any HZ for the mouse or does it have to be 1000hz?

[@XIMCentral]

Hey, as long as the mouse polls at 250hz or higher then yes, it will work! :)

[@lalolife23]

is there any way to make your recoil really good that the fact it looks like cronus, while using xim apex

[@XIMCentral]

You can use the anti recoil tricks from my two dedicated video tutorials. An anti recoil script like Cronus uses cannot be put onto a XIM though as that could get you banned.

[@Markusaur]

thx for the video.. ill be giving this a try soon.. but I noticed you didnt mention the effect of mouse dpi.

[@XIMCentral]

Hey, the reason behind this is that mouse DPI works on a different layer and therefore has no influence on these settings. The trick will work with any DPI value! :) The same DPI rules as always apply here, use more DPI for less aim assist or less DPI for more aim assist.

[@Warpgate8]

Do I still keep 1000hz on the mouse and does it work on overwatch?

[@XIMCentral]

OW2 has the same HIP and ADS aim mechanic so in this case it wouldnt work. A game needs to use two different aim mechanics for HIP and ADS for this trick to work.

[@rudranewaz6664]

I play multiple games each dedicated video different global hz was used 250(this trick),500(pubg),1000(OW + APEX) its kinda messy to keep changing it nd unplug for it to apply before playing the game though :( after watching this video ..you have mentioned that it works in games that aim assist so i thought bingo problem solved..... yeah ow1,rs6,pubg, ill not apply this trick but i have applied for Apex Legend , warzone by bringing the 1000hz to 250hz and applied the necessary changes in the video.. pretty sure thats okay for these 2 games atleast?

[@XIMCentral]

Hey, for the 500hz configs i usually only pick that profile because i know very well that most people have never done a mouse polling rate benchmark and their mice most likely perform bad on 1000hz. These 500hz games usually are sensitivity to mouse stutter so i pick that profile over 1000hz to ensure the user has a great experience even when not having done a benchmark before. If you know your mouse runs great on 1000hz then you can play all my 500hz configs in 1000hz. As for this aim assist trick, i would recommend you to wait for my next tutorial video to come out as that should greatly help you to make up your mind on which setting you want to run with from now on :).

[@vxnsity-4325]

It’s me again haha.. So do you need to change the polling rate and dpi of your mouss too ? To match these settings ?

[@XIMCentral]

Its fine to run a higher polling rate on the mouse, just make sure that your XIM never polls faster than the mouse. DPI doesnt matter for this trick and can be used to further adjust the aim assist strength :).

[@vxnsity-4325]

@@XIMCentral Thanks for your reply ! Love your content :)

[@tiborluck4671]

Does it work for Destiny 2? Cause many people are saying you wanne fight aim assist....as in remove it complete due settings

[@XIMCentral]

Yes it works for D2 as well! :)

[@lillarryv350]

Does it help with rainbow six siege too? Or just keep my sens where it’s at?

[@XIMCentral]

Depending on what settings you use yes, these ones can provide smoother and more responsive mouse movements. There will be no aim assist gain though (except for thunt if you have aim assist active for it).

[@tiborluck4671]

Do you also change your mouse to 250 polling if possible?

[@XIMCentral]

Hey, as long as your mouse polls at the same rate, or higher than your XIM then its fine, no need to change.

[@battle-peachl8881]

Danke erstmal für das Video. 2 Fragen... Warum funktioniert das nur mit Sync. Off? Hat man mit 250hz kein input Lag?

[@XIMCentral]

Hey, das wird im nächsten Tutorial-Video näher erklärt was etwa in 1-2 Wochen kommt (Synchronization Tutorial) :).

[@smolpurrfection7124]

Why does it only work with off sync? What if I want more aim assist, doesn't off gives the lowest and low and common give the highest aim assist ? why not go with them ?

[@XIMCentral]

Hey, the reasoning behind this trick is explained in my Synchronization tutorial which i uploaded a few days ago :).

[@cynicalsense8825]

Should the mouse pulling rate be set to 250hz also ?

[@XIMCentral]

Hey, you can do that but its not necessary as long as the mouse polls faster than the XIM.

[@steffffykim]

What if you use xim on PC? should you still use 250hz polling rate?

[@XIMCentral]

A lot of viewers have reported this trick to work on PC too, so yes id say so :).

[@lionomaree2997]

I did this for my Hip Fire Config and ADS, but do i also do this for my Turret/Wingsuit Config?

[@XIMCentral]

You can do it but i dont think its necessary or offers a lot of potential.

[@LBUK.]

Does it matter what DPI you use? Thanks ..

[@XIMCentral]

Hey, DPI dont matter for these settings. Use more DPI for less aim assist and a lower DPI profile for more aim assist! :)

[@2人は幸せなキスをして終了-i7z]

It's the video I've been waiting for! Can I ask you a few questions? I assume I will be using this setup in overwatch and apexlegands please ask! 1, Do you think this setting is better than past settings? Also hz is 250 for both xim and mouse? 2. In Overwatch, should I try the in-game settings with a window size of 10 or 50 like you told me before to decide? Or is there a specific setting? 3. What should I use for dpi in Overwatch, 1800 or 3200? Is it better to try this and see what works for me? 4. Should I use the curve that was introduced in the previous video? kzbin.info/www/bejne/noqZfaR8bMd_fdE Sorry for so many questions, but please help me out!

[@2人は幸せなキスをして終了-i7z]

I'm trying to create a setting that works for me, should I wait for the video in two weeks?

[@michaelmehaffy7367]

@@2人は幸せなキスをして終了-i7z I use mine for apex legends, don’t make the same mistake I did! Lol I used it for like over a YEAR wondering why I was GARBAGE and couldn’t aim. I Also didn’t have any aim assist. Make sure your apex advanced look control settings are all set to 0 except “pitch and yaw”and “ads pitch and yaw”. Those get set to MAX. And The top 3 settings stay default, (your dead zone, etc.) go from there.

[@zxrr3448]

would it be better to change my mouse hz to the same 250hz or should i leave it at 500hz?

[@XIMCentral]

Hey, you can keep your mouse at 500hz thats perfectly fine. As long as the mouse polls the same or faster you are good.

[@Vu1gr]

Hi I just had a question could I use the G Pro Logitech Wireless mouse on Xim by plugging the little usb in ?

[@XIMCentral]

Yes exactly, you can do that and you only have to connect the wireless USB dongle to the XIM Hub :).

[@Brian-xd8uc]

Hey Od1n I hope you are well! So with these settings: Sync off, 250hz response rate, 0 SAB on hip and ADS - Am I correct in thinking this could be like the Apex's version of Xim4 settings? because we know that xim4 was running with the same settings as above apart from 125hz, and everyone seems to agree that xim4 had amazing settings out the box. So if we are looking to replicate that feeling, perhaps even using 250hz could give some kind of advantage as that's what PS4 is running at. I actually never owned the Xim4 but I would love to think I'm on the right track - these settings definitely feels nice up till now.

[@XIMCentral]

Yes this is correct! :)

[@Brian-xd8uc]

@@XIMCentral Hey thanks for your reply. I just renewed my membership to say thanks - in general you're doing a great job with this channel and the content has been awesome! By the way I have another question - so we know xim4 = sync default/off at 125hz (same thing at 125hz), SAB=0 however if we do sync default at 250hz, SAB=0 , does this also provide the "Apex's version of Xim4 settings"? I am wondering what are the fundamental differences between sync default 250hz and sync off 250hz I did watch your recent video on the syncs, but I still don't understand 100% the effect of the 250 hz when combined with sync default (which is supposed to be related to 120fps)

[@XIMCentral]

​@@Brian-xd8uc Thanks again for the kind words and support, always happy to see familiar faces returning to the membership programm! ;) Sync off means that the XIM sends as many inputs to the console as it can. So it gets limited by the polling rate that you choose. With 125hz it is limited to 1 input per 8 milliseconds. Sync off 250hz would mean 1 input per 4 milliseconds, so twice as much. Now sync default is locked to 120hz which equals 1 input per 8,3 milliseconds. Given that 250hz is 4 milliseconds the inputs are therefore limited by sync default and not the polling rate. You could therefore also use 500hz or 1000hz, the overall output would be the same when using sync default (except for when your mouse produces stutter on 1000hz for example). Now to explain the way a XIM4 works, it runs on 125hz aka 8 milliseconds per input. Sync off means it sends as many inputs to the console as it can, so 1 input every 8 milliseconds. When using sync default you basically get the same inputs per second. Sync default equals 120hz aka. one input per 8,3 milliseconds, which is basically the same as one input every 8 milliseconds. Therefore it doesnt really matter if you use sync off or default when playing on 125hz.

[@gabrielpereira204]

I've been with the XIM Apex for about 5yrs now, my only question with this if can please help me out Is what if your configuration was already set (OFF) synchronization? AlI I had to do to match what you stated was go from 500hz to 250hz but now my settings feel too fast. How can I fix this?

[@XIMCentral]

Hey, in the video description you can find a conversion sheet. In your case you have to divice your sensitivity by 2, then it should be as fast as before :).

[@gabrielpereira204]

@@XIMCentral thanks so much!!

[@alaintrottier5229]

Did you change the internal polling rate of the mouse as well?

[@XIMCentral]

Hey, as long as your mouse polls at 250hz or higher you dont have to make any mouse polling rate changes :).

[@CookinWMatt]

If I switch over to pc for Apex legends will I still be able to use the xim if I plug the xim and controller into my PC while playing the game?

[@XIMCentral]

If you use an Xbox One controller then yes, that should work.

[@CookinWMatt]

Thanks for the reply. I've gotten so used to the xim settings that I don't want to switch. I have my own amazing settings that I came up with that works really well with recoil control, boosting aim assist, and smooth mouse movements. For anyone thinking about buying xim. Do it. It's going to level up your console fps gaming to the max.

[@LilZayDaddy]

do you change the mouse polling rate too? or can I keep my mouse polling rate at 1000?

[@XIMCentral]

Hey, you can keep your mouse at 1000hz, its sufficient to change the XIM polling rate.

[@applebro9943]

Hey! My mouse Poll rate need the same? Or it can be higher like 500 or 1000?

[@XIMCentral]

Hey, you can use 500 or 1000hz too, thats no problem! :)

[@applebro9943]

@@XIMCentral thanks! I just tested my mouse and 500 will be okey cuz mouse cant reach 1000 just sometimes.

[@XIMCentral]

@@applebro9943 Yes absolutly, 500hz on the mouse is perfect for this trick! :)

[@applebro9943]

@@XIMCentral Thanks! :)

[@jcampezhi2683]

Is there recommended inputs or adjustments to SAB doing this config? Ty love the vids

[@XIMCentral]

Hey, this trick is basically the underlying foundation of a config so you can add anything on top that you would like to (SAB, Steady Aim, ...). These will have 1:1 the same effect as always due to this aim assist trick working on such an underlying/low level.

[@jcampezhi2683]

@@XIMCentral thank you, your an amazing person!

[@jcampezhi2683]

@@XIMCentral I’m loving this config but sometimes it feels too floaty where I don’t hit shots cause of it, what’s a way to add a little sticky ness to the Aa?

[@XIMCentral]

@@jcampezhi2683 More aim assist can for example be achieved by reducing your mouse DPI. Though if your aim feels floaty try some boost instead (increments of 100).

[@jcampezhi2683]

@@XIMCentral I’m already at 3200 and been at 3200 so would like to keep the muscle memory, will smoothing help? I’m trying 1 smoothing now or is that a bad idea

[@nico4132]

Hi i just got a 3rd party controller for ps5. There is no PS5 ST yet ?

[@XIMCentral]

Not yet since all PS5 games use the PS4 aim mechanic so far.

[@BokCB]

Does this work for pc games since pc is made for higher polling rate?

[@XIMCentral]

Yes it does, when playing a PC game via XIM it basically runs in console mode.

[@Maddnees]

Ok but the mouse sensitivity how much I keep the Hz ?

[@XIMCentral]

Hey, as long as your mouse runs on at least 250hz you are fine.

[@3la2Saber]

That was amazing Tried it in warzone Gameplay improved and feels good I can't decide which sync is better Off or common And can we apply this to any game Rogue Company BF1

[@XIMCentral]

Happy to hear that! The next tutorial will be a synchronization tutorial, it might help you to better understand the mechanics behind it and what sync might be the best for you! :)

[@afclapz5515]

do you think you can help me

[@XIMCentral]

@@afclapz5515 Hey, what problem do you have?

[@dumaarmylukasz5408]

Thanks for the great work mate. In one of your comments you mentioned that if someone is using MJ config we should keep the MJ settings we have been using unchanged and only reduce sense from 500 to 125. I have done that but when sense is reduced to 125 fast mouse movements are way faster then they should be. What I mean by that is that it seems as though there are two mouse speeds, a consistent one when moving the mouse at regular speed and the crazy fast one when I am trying to make a quick flick on quick hip change of directions. Any thoughts bossman?

[@XIMCentral]

Hey, was your previous MJFame sync on off? Also can you check both your ballistic curves? It kind of sounds like they do not stop at 100% but at like 90 or 95% which would then result in such a behavior. See this short sketch on what i mean. Red is wrong, black is right www.tinyimage.de/im/1/17/5/24/15/30/11_109.jpg

[@dumaarmylukasz5408]

@@XIMCentral Well, some good news. Albeit both curves were set to 100 I cleared them both and set them again which fixed the wired double sense issue. That being said just dropping the MJF sense to 125 wasn't giving me the same sense I had on 500, I know that mathematically it may make sense but it was way to slow as it was. Anyway, I have played with the curve a bit to try and find the right sense but in the end I went back to 500 / 1000. It may be just that I wasn't able to find the copy of my sense on 250 but everything from tracking, going in and out of bubble, snapping or hip fire, felt so much better for me on 500 / 1000. This is not a criticism of your video, it may just be that I am so use to the setup I am using that everything else feels off to me. Keep up the great work mate!

[@XIMCentral]

@@dumaarmylukasz5408 Nothing wrong with prefering that, its usually best to not go overboard with the aim assist which is something that 250hz + MJFame would do! :) You want to have a good balance between nice mouse movements and aim assist, thats usually the best.

[@graemewhite977]

Great video, please can you help?. I use MJFame already and my Sync is set to off and XIM sensitivity is set to 500. My Global settings is 1000Hz as is my mouse. If I change the global settings to 250hz, must I divide the 500 sensitivity by 2, 4 or 8? Also can I leave all other settings as they? I see in the comments below, you suggest MJFame users adjust sensitivity to 125, so you are dividing by 4, I will try that and see how it works

[@XIMCentral]

Hey, yes you can keep all settings as they are though id recommend to lower the smoothing value to 10 or 15 to maintain responsive mouse movements with 250hz. As for your sensitivity question, with 250hz divide your sensitivity by 4, so use 125 instead of 500 :).

[@Arizite]

It tracks enemies very well but the bullets don't land half of the time it's like it shoots just near them but the hitboxes aren't big enough like with common? Wish there was a way. to fix this

[@XIMCentral]

Hey, this could be network related too. If your ping is fluctuating or not low enough then this can cause hitbox inconsistencies.

[@Arizite]

@@XIMCentral I was on 500 hz accidentally. I just retried it on 250 hz and my god it's the best setting I've ever used. I get insane aim assist that centres me perfectly whilst having zero jigger and great mouse movement qualities. Unbelievable. I've tried so many settings on bo3 bu this is perfect. The aim assist bubble doesn't give me any issues anymore. I no longer need smoothing or steady aim

[@teddymixes]

Nice ich habe schon immer bemerkt das die Poling rate 250hz besser geeignet .....ich bin ja Mal gespannt wenn das neue Produkt angekündigt wird ..

[@battle-peachl8881]

Neues Produkt?

[@viannyhernandez3094]

Can you plz do a updated version of the quick peek

[@XIMCentral]

Ill check it tomorrow if it still works.