Xing 2207 1800kv 6S Maiden

[@AirScheichi]

oha sehr nice ... die quality unds fliegen haben sich ja krass verbessert über den sommer o.o

[@dronimik]

Was ein Kompliment von dir, vielen Dank und viel Spaß in Österreich! 🤗

[@fpvtomi8965]

Hi, sehr schoen geflogen. Ich habe mir die gleichen Motoren gekauft, dann war ich zwischendurch wieder unsicher, wegen der kv, das Video hat mich dann aber dann doch überzeugt. I bought the same motors, In between, I wasn t sure about it, because of the relativ low kv. But you convinced me. Thank you

[@dronimik]

Hi Tom, das freut mich, wenn ich zu einer sinnvollen Kaufentscheidung beigetragen habe. Die Technik funktioniert inzwischen echt gut und schlussendlich kommt es ja auf die Flugkünste an. :D Viel Spaß noch beim Fliegen!

[@fpvtomi8965]

Verrätst du mir deine pitch rates,(?) bin auch gerade am look back dran, der ist doch recht uebungsintensiv, da finde ich den powerloop leichter, auch wenn ich da mehr gecrasht habe am Anfang. Ich bevorzuge im Moment als erstes den pitch nach vorne und dann die 180 Grad Roll, da hat man mehr Kontrolle, aber ist Geschmackssache.

[@dronimik]

@@fpvtomi8965 Bin aktuell bei RC Rate 1,4 Super Rate 0,65 und dementsprechend bei 800 Grad pro Sekunde. Einfach ein bisschen probieren. Der Trick ist auch seit einiger Zeit mein Favorit. :)

[@ThrunRC]

Schönes Video, Super geflogen ! TOP Motoren _[] -)

[@dronimik]

Danke dir! :)

[@ThrunRC]

@@dronimik Darf ich dich fragen welche Props Du da drauf hattest?

[@dronimik]

@@ThrunRC In diesem Video war es glaub ich ein Satz Ethix S3, ansonsten flieg ich die T-Motor 5143 s. Bin aber nicht mehr so im Gear-Game, gibt ja inzwischen auch andere interessante Optionen.

[@ThrunRC]

@@dronimik Alles klar danke für die Info 👌

[@-Mutiny-]

Great flying! Love the video and the stick overlay :)

[@dronimik]

Thank you Mutiny! :)

[@hondus16]

Nice flying! And this stuff is not even expensive! Cheers!

[@dronimik]

Thanks mate! Are you getting into drones?

[@hondus16]

@@dronimikI am in drones for about year now :D But every few months i change something. Im looking for stuff that fits me. It is so addictive. I got inspired by your flight and im gonna build something similar. I still can't learn juicy flight but will get there eventually! Greetings from Poland!

[@dronimik]

@@hondus16 It's really not about your gear: I changed my gear very frequently until last year, but that's what stoped me from becoming a better pilot. When you fly your gear for a very long time, you know all it's limitations and that's what counts in situations where you need to get this one shot on set. I lost all of the Gear you saw in this video last autumn in Spain, when they broke into our car. At first I was thinking of starting out with filmmaking without a drone, but three days later I felt the need of wanting to fly. So I bought my "dreambuilt" from what I had learned over the last three years. I don't have any issues with Jello or reliability, but what lacks is motivation, passion and creativity in this area. That's what counts and I lost it over the years and found it with filmmaking. Drones are just a tool in this industry. Now I'm at a point where I have everything I wanted, but neighter does it make me happier or a better pilot. So please be as happy as you can with what you got and learn from all the issues you run into. This knowledge of troubleshooting is priceless and you won't really lose it. The hype is your evil in capitalism. Sorry if this was to heroic. ;) This video also expresses what I wanted to say: m.kzbin.info/www/bejne/fZOYaYOJrdqdbtU Enjoy your weekend! :) (Here is the gear I'm using at the moment if you want a suggestion: -Source One 5' -Xing 2207 1800kv -Mamba f722 stack -T-Motor 5143s -Rumcam Micro Swift 3 -Unify Pro 32HV (I would suggest the usual Pro HV) -Propfräse Antenna -Crossfire Nano RX -SLS NOC 6s 1300mAh -X9d with M9 Gimbals -Crossfire TX Lite -Hero 6 Black with Yello Guards)

[@hondus16]

@@dronimik Wow man, thanks for your message. i wasn't really close to "talk" with someone i always wanted to fly like. That is very good lesson for me. Thank you for that. i will try to focus on my skill instead of stuff. Maybe it is the point i should look after. Maximize your skill until the hardware is the limit right, ha? I saw your comment on the vid that "dreambuild" might not be the only case. It is like with the photography. Tools won't make you good photograper right. Thank you. Keep doing your job. These "small" youtubers change others lifes ;) After this i would meet you and just hit the high five. Thanks man ;)

[@dronimik]

@@hondus16 You got it. If you want to, you can just call me on Instagram. It's always a special experience getting in touch with people you only know through the Internet. Or come to Germany so we can fly some packs together. :b

[@jakeboynz]

Really enjoyed your video!! Excellent flying bro... Cheers from Australia 😊👍

[@dronimik]

You made my day. These sort of comments really motivate me to keep it going. Enjoy your day!

[@jakeboynz]

@@dronimik I'm glad I did. We need to keep up the inspiration. Have a blessed day too 👍

[@bkdgaming2209]

What's the battery? How many cells and mah

[@dronimik]

Take a look at the description. CNHL 1000mAh 6S 100C :) Can't really suggest these special ones.

[@thaddeusj83]

I have been running the 2208 1800kv xing and wont be changing unless something crazy comes out

[@semrukburkutfpv]

Hello, can i use this motor 4s and 6s battery ? or just 6s battery ?

[@dronimik]

Yes, both 4s and 6s if your ESC is rated that way. In theory you can also run it on 1s. It just won't be powerful. 4s is a bit underpowered but e.g. for longrange and a bit of freestyle it works.

[@semrukburkutfpv]

@@dronimik thank you so much.. i want to a build for cinematic. which kv do you recommend ?

[@dronimik]

1700kv to 1900kv should work just fine. In most cases you don't need too much power for "cinrmatic" flying and you can always use throttle limit if it's to much for the situation. 1800kv works for me, but I often use throttle limit and don't need to go 120km/h to fly cinematic/smooth. It's mainly a matter of skill not gear these days.

[@alexanderveit7370]

Sweet flight and awesome spot, not cool on the deer though, but well...

[@MordaRSi]

hi, please tell me your pids for 6s?

[@dronimik]

set p_pitch = 75 set i_pitch = 55 set d_pitch = 18 set p_roll = 70 set i_roll = 55 set d_roll = 16 set p_yaw = 67 set i_yaw = 47 set d_yaw = 0 Betaflight 3.5.7 There you go. Sorry for the late reply. This video was on stock PIDs! The lower d-gain (around 18 instead of 27) was the biggest change. Might be even too low. I haven't quite gotten behind tuning and I think it's worth more to learn how to do it, because every quad is different and the stock PIDs should work fine. Filters are more important in the most part. Flying matters. :) Have a great day!

[@mrarrgeereaction6479]

Alter das mit den Rehen mega geil, hatte auch häufig paar vor der Kamera allerdings nie so nah xD

[@fadhilmuhammadfawwaz9070]

do you use dys aria 35a on 6s?

[@dronimik]

I now fly with the Mamba F722 Stack but yes back then I was flying the Aria 35a. :D I had problems with dipping on two of them but other than that they worked just fine and are 6s rated. Do you think about jumping onto the 6s hype train?

[@chadpeterson5723]

Some great fly n

[@dronimik]

Thanks! 😋

[@mauricevieren]

Habe die selben Motoren verbaut, habe allerdings das Problem, dass wenn ich einen 6S Akku anstecke, die Base RPM schon so hoch ist, dass der Quad beim Armen abhebt. Kannst du mir sagen, wo und um wieviel man diesen Power Output reduzieren muss? Musstest du den auch reduzieren?

[@dronimik]

Hey Maurice, kann gut sein. Da müsstest du wohl den Motor Leerlauf Gas Wert [Prozent] im Konfigurations Tab runtersetzen. Einfach testen, wie niedrig du gehen kannst, sodass die Motoren noch gleichmäßig ruhig laufen. Ist bei mir auf 6 eingestellt. Liebe Grüße :)

[@mauricevieren]

Danke dir!

[@JediJoeFPV]

Классный спот👍

[@OLEHFPV]

nice flying I recently purchased the same motors to try out need to build a new drone since i lost mine

[@dronimik]

Thanks buddy, I somehow really felt it on this pack. :D Can only suggest trying out new Rates and variations in Power for finding new styles. Feel sorry you lost it, so enjoy flying your new one! :)

[@jevgenie7094]

Hi what is best props for motors ? 6s 1800kv

[@dronimik]

Hey Jevgeni, I personally use the T-Motor 5143s (triblade) because their gray doesn't show up as much in the Footage and they are a good middleground for Freestyle etc. It all comes down to preference and I haven't tested that many props. Like the HQ 5041x3 aswell (this video was flown with them). They all fly pretty much fine today and the more different props you have less spares there are. :D I think these would be a good suit too but I'm sick of changing my Setup: kzbin.info/www/bejne/raGUg5iXjpuUrcU Best regards Dom

[@thecobblermanFPV]

What rates you got dude? Seems high but you fly so smoothe

[@antoniodelvecchio5793]

How much current would draw with 5055 props?

[@dronimik]

I don't have 5055s but would expect around 110-120A on 6s (in Blackbox explorer. OSD will show something lower from my experience.) Maybe use motor output limit with that prop. Do you talk about the Gemfan Hulkies?

[@antoniodelvecchio5793]

@@dronimik I have bought a drone form a guy who used 5055 props on nazgul5 6S and I would like to know if motors have any damage now. They spin giving them commands from betaflight but since I don't have a 6s yet I couldn't test them properly

[@Jamaicarasramarc]

Schönes Video Habe auch die 1800kv und 6s 👍🏼

[@dronimik]

Danke, dein Video war mitunter ausschlaggebend für meine Kaufentscheidung. Throttle Limit nutzt du nicht oder? Liebe Grüße

[@jtg_rc1583]

Are those the amps per esc or all 4

[@dronimik]

Hey, those are the amps for all 4 ESCs. (around 100-110A peak)

[@jtg_rc1583]

@@dronimik those are more efficient than I remembered lmao, crashed mine into the ocean unfortunately

[@ag.page.]

I just ordered my HD1 frame and these motors for 6s. Have you tried to fly these motors with 4s how does it feel for cinematic ? This will be my first FPV with DJI hopefully I will like it. Very nice Video!

[@dronimik]

Hey Alex, I have experience with flying 4s on these motors, because I had 4x4s and 4x6s packs when switching. For cinematic flying it's very useable. When climbing a hill you will find yourself on full throttle, but the amp draw is quite low and sustainable for your lipos. You can even freestyle with it, but have to stay on throttle a fair bit longer. Switching between Rateprofiles (use the auto_cell_count feature!) and PID Profiles was a bit annoying over time, when going from 4s to 6s. You need quite high PIDs for it to feel relatively locked in for freestyle, but the soft feeling is great for smooth cruising. Have a nice day buddy!

[@ag.page.]

@@dronimik Thanks for your feedback. I realized I ordered the 1900kv 3-6s I hope I can adjust the throttle not to kill the lipos and fly well.

[@ag.page.]

Fellas Boyz I have 10% throttle limit on with Ethix S5 props. It flies well. I saw some light spots on the windings not sure if thats from the load. The motors get warm sometimes but never hot.

[@akgolovanov]

thank you for advices!

[@tpetersons]

Hi Smoothie, nice flying - subscribed :) Listen, saw you in another video, you got your goggles like 9months ago, were worried about blurry edges. I still see you using them, are edges OK? I can get 2nd hand HD2s for 240$, which is at least half the price of new HDOs. Let me know, ur opinion will help decide :)

[@dronimik]

Hey Tom, if you use thick foam your eyes get further away from the optics and you get some blurring on the edges. I use a very soft foam, that is comfortable and takes away most of the blurring. When you close one eye, you can see blurring on one of the edges. Which side the blurring appears comes down to your IPD adjustment. With the right IPD adjustment and both eyes opened your brain matches both together to a clear image. When flying, you don't pay attention to it anyways. If so you can still sell them for the same price. Buying the HD2s was a great decision especially for the price. Got them used for 250€ with True-D V1, LiPo and Transmitter Case. I would recommend getting one with a higher quality module, like a Realacc rx5808 with OSD, right in the beginning. I don't need HD0s at the moment. Happy with the HD2s. :) Thanks for your for your subscription! I'm always in need of some feedback. Have a nice day! :)

[@ValFPV]

Hi, danke fürs video und probier mal Propeller mit niedrigerem Pitch wenn's dir zu viel power ist!

[@dronimik]

Hey, danke für den Tipp. :) Bin inzwischen tatsächlich ohne Limit unterwegs, außer es ist z.B. Indoor. Mit weniger Pitch hat man schon schneller Ansprechzeiten und etwas geringeren Stromverbrauch. Vielleicht probiere ich das mal wieder aus, wenn sich meine T-Motor 5143s dem Ende zu neigen. Liebe Grüße!

[@faktalist]

Whats better DYD aria?

[@dronimik]

Hey, so do you mean what's better about the DYS Aria compared to the old Littlebee 20a?

[@worthlessdays8365]

Great work!

[@dronimik]

Thank you. Your latest video was cute. I like how you just share whatever is important to you at the time. Have a nice day!

[@jasondonavich2758]

You don't need any limit with 6s low kv, but I'm sure you knew that anyway.... 6s low kv is the best thing I've ever flown.

[@dronimik]

Hey mate, I decided to set a limit because it is easier on the LiPos, I get less of a bounce after punshing out and because the low throttle resolution is better with it. Shure you can fly without a limit if you don't experience these things as much with your setup or okay with it. I don't see a big difference in feeling when it comes to 6S low KV but different people have made different experiences. :) Enjoy your day!

[@jasondonavich2758]

@@dronimik I use lower KV than yours so maybe that's why, when I went to low KV 6s I found so much more control at lower throttle, and I hardly have to go full throttle to lunch out now.

[@salary_to_profit]

Building a 6s drone is so cheap. I only had to sell my brand new car.

[@dronimik]

Like really? :D You can pay quite a lot of money. Going for a walk cheaper. Drifting cars might be more expensive. :b

[@salary_to_profit]

@@dronimik can't explain it bro. My first drone flew away😭 2nd crashed 3 burnt the motors and ESC with 6s and finally now I fixed everything. I fly my drone with a rope attached and above 2 meters only. Now it don't fly away and no crashing.

[@dronimik]

@@salary_to_profit Oh man that sucks, I feel so sorry. My first drone got constantly upgraded and finally stolen over a year ago. That's where you learn that all the stuff we own isn't for ever and there are more important things in life. ;) Hopefully you can progress and enjoy flying now!

[@salary_to_profit]

@@dronimik Thank you.. I have learnt from my mistakes. I enjoyed your videos. Great job .

[@espenchristensen9581]

Why the stupid music when you test motors? we want to hear the motors.

[@dronimik]

Hey, I don't think the music is stupid, it's all a matter of preference for shure. Watching videos with music is more interesting to me and Freestyle without feeling it isn't as much fun to me. Also people who aren't into FPV, as much as we are, often hate the sound, but I got your point. Have a nice day! :)