XR600R rebuild + Sandraiders prep + ABR 2024

[@bananabrooks3836]

That looked like a nice Xr600 to start with but a comprehensive prep for the future well done.

[@RAWBikesTV]

Thanks 👍

[@tonybennett3904]

One of the best bikes ever built,goes for most XR s

[@jean-lucgirard9402]

Great video and very beautiful XR600R .

[@RAWBikesTV]

Thanks a lot!

[@PerryLeask]

Enjoyed seeing your bike refurb. Well done 👍

[@RAWBikesTV]

Thanks 👍

[@issigonis94c]

Good video and a detailed build. Busy renovating an XR400R for Morocco next year myself, so a useful reference.

[@nicowarr]

Yep, me too, see you all there..

[@RAWBikesTV]

Glad it was helpful!... See you there!

[@nicowarr]

@@RAWBikesTV - question for you: I have 2 engines for my XR600R - the original kicker and a 1998 NX650 with estart. They are both good - which would you choose if you were in my shoes? Thanks!

[@RAWBikesTV]

@@nicowarr ... The XR600R feels a bit more "peppy" than the NX650 engine but in fairness it's just been rebuilt... I like kick start engines for the Sandraiders as the battery cannot go flat but many prefer the electric start as if stalled on the side of a hill, it's much easier to get going .... In one of my Sandraiders 2023 (pt4 The dead camel), I got lost and dropped the bike... It nearly did not start and the battery was running low ... It made me think about having a flat battery in the middle of nowhere on your own 😳 ... Yes, we have an emergency GPS tracker fitted, so you should be safe .... It really depends if you are happy to "kick" ...

[@nicowarr]

@@RAWBikesTV Thank you - just watched that video - losing your way must've been frustrating as hell! On the XR, how do you find it to kick when the engine is hot?

[@johnmignano7872]

A part here and there, reality bites into the restoration dream pretty fast too, enjoy and have fun Jeremy.

[@TheRadgeOne]

Worldclass video record of this epic rebuild Jeremy!

[@RAWBikesTV]

Thank you ... very kind

[@rosarioroberto5823]

Greetings, As always another brilliant detailed video production 🇺🇲🍾🎉🇺🇲 Thanks for sharing and keep us updated

[@NRawhide]

Nice vid. Your channel and Harry M's have inspired me to run in Sandraiders, likely in 2026 now as 2025 is sold out.

[@RAWBikesTV]

Hi, maybe see you in 2026... Morocco 2025 sold out in two weeks!

[@theposh1970]

great video, don't know why you don't have more subscribers!

[@RAWBikesTV]

Hi, it's probably as the channel is new and not too many videos yet ... Perhaps over time ... Thanks for the kind words

[@stephendavis7707]

Had both the dominator and the xr ,really hankering now for another XR great build good jpb it pays to be thorough especially in the Desert happy trails ...

[@RAWBikesTV]

Thanks

[@iantumulty4053]

Great service and value from HM Racing

[@RAWBikesTV]

Hi, HM gave great service .. Top bunch of guys!

[@jonbailey5460]

Excellent video Jeremy :-)

[@RAWBikesTV]

Many thanks!

[@iantumulty4053]

Great content, looking forward to this journey 👌

[@RAWBikesTV]

More to come! ... I'll be recording in Tunisia Nov '24

[@Boogz-gd3lo]

Great video love these bikes . One thing you should probably check. The two banjo bolts that hold the pipe between the head and crankcase are two different part numbers and have different size holes for the oil feed.The darker one goes next to the oil filter and the zinc one goes to the head. I noticed your head bolt was the darker one. Might be worth checking .

[@RAWBikesTV]

Thank you for the comment... I will check!

[@martinnightscales5690]

Great video! I had no idea about ABR I’ll be planning a trip next year with my XR.

[@petegkSalonika]

great work mister when the cost of upgrading a bike is not an issue then we do great bike works .. what i like most is the after market oil cooler and its guard ! , those bikes and many more air-cooled suffer from heat ,, so i would like to know who makes those coolers and where can find them and check for my bike ... ....

[@RAWBikesTV]

Hi, the oil cooler is Sutton Cycle Works ... suttoncycleworks.com/

[@petegkSalonika]

@@RAWBikesTV many thanks friend my regards from greece , keep on riding ,,, and do your magic in your work shop there ,,,,,

[@wbpderks]

Great video! Which sand raiders event is better fun ? Tunisian or Morocco?

[@RAWBikesTV]

Hi, I've only been on the Morocco event... After November I can answer that question.... The Tunisia event only started last year.

[@bananabrooks3836]

Is that cyl head crack a common issue, l would be a bit concerned abt it but the builder seems to think it's ok and doesn't suggest any welding.

[@RAWBikesTV]

Hi, I'm not sure if it's common but the heads do crack and from over heating .. hence the oil cooler to help. I'm not sure it's going to be an issue only time will tell.

[@bananabrooks3836]

@@RAWBikesTVYes maybe leave it till the Winter then l would perhaps take head off and take it to a very well reputed ally welder.

[@davyw.8659]

cracked head from plug to valve seat ..common problem on 4 valve honda heads...when that heats up the valve seat will fall out ...bye bye engine

[@RAWBikesTV]

Hi, yes that is a worry ... only time will tell... I do have spares but hopefully will not need them

[@davyw.8659]

I race XL 350 vintage Mx and it's quite a common problem. I've had a few heads with cracks there .. I wouldn't risk it ..

[@skmotorcycles8123]

For sale ?? I dream of a xr650r but none here in Ireland so a clean xr600r would also do

[@RAWBikesTV]

Hi, sorry not for sale as I intend to use for a few Sandraiders events and possibly others ... You can buy new/second hand XR650L versions in the USA .... XR600R's are hard to find in the UK .. Good luck with you hunt!

[@johnroberts1585]

Hi I have a all original 1996 Xr600r 17000 klm no leaks or damage its for sale.

[@RAWBikesTV]

Hi John, will DM.

[@RAWBikesTV]

Hi, I'm not sure I can send DM to you? - I did try. I'm not sure I have room myself for another bike right now, but I if you send details via email I can ask within Sandraiders and others. [e-mail]