These are my favorite kind of videos. Your attention to detail, and fab skills are fun to watch .
@BrickHouseBuilds7 ай бұрын
I appreciate it and glad you enjoyed!
@garybrandman62587 ай бұрын
I am 70 and dig your music.
@BrickHouseBuilds7 ай бұрын
🤘🤘
@S2NAZ7 ай бұрын
I’m a year behind ya Gary and yea, the music is perfect 👍🏻
@JoshA867 ай бұрын
Excited to see this bike take shape! Nice to see some fabrication stuff again. Ignore the haters on the music, it's well executed and makes the video much more enjoyable.
@BrickHouseBuilds7 ай бұрын
Thanks Josh! Happy to be back on it
@AndyH-137 ай бұрын
DJ BJ in the house. Brackets look great, quality work as always.
@BrickHouseBuilds7 ай бұрын
😁🤘🤘
@Null7Mereel7 ай бұрын
Im always down for a good revival, but seeing you fab stuff up is always a favorite vid!
@BrickHouseBuilds7 ай бұрын
🤘🤘
@paulbuckberry76837 ай бұрын
Nice bit of fabrication there. Good video.
@BrickHouseBuilds7 ай бұрын
Thank ya!
@mmotorcycles94977 ай бұрын
The fab work , awesome. Side note the music is great.
@BrickHouseBuilds7 ай бұрын
🤘🤘
@mfc45917 ай бұрын
Intricate work, very neat. Looking forward to see it in completed glory.
@BrickHouseBuilds7 ай бұрын
Thank ya
@gerardcullen51317 ай бұрын
Very clever piece of fabrication BJ looking forward to the finished product
@BrickHouseBuilds7 ай бұрын
Thank ya!
@DocJonesGarage7 ай бұрын
Good one BJ, your new table looks like it's working nicely!
@BrickHouseBuilds7 ай бұрын
Loving it!
@michaelhayhoe25403 күн бұрын
Hey - I like the music and the video. I wish I had watched this series sooner and I would have bought the Honda CBX 500 custom.
@BrickHouseBuilds3 күн бұрын
@@michaelhayhoe2540 🤘🤘
@michaelskinner8967 ай бұрын
Great stuff! Love your ingenuity with the custom works. Although those brackets were physically small, they make a big impact. Glad you're fully committed to this project and I'm looking forward to seeing more episodes!
@BrickHouseBuilds7 ай бұрын
Thanks Michael. Definitely wanting to see this one through
@xanbiker7 ай бұрын
Fabrication is the best part of any build.... What can be done that is different??? Nice clean work!!!
@neilmoore78057 ай бұрын
Ignore the haters. You do you. The only time music is bad is when I can't hear the narration. You should do one week internships with your viewers. Hands on learning for us, free help for you (or you could charge us for it 😮)
@Busydadgarage71728 күн бұрын
This channel is aweome. Love this build.
@BrickHouseBuilds28 күн бұрын
Glad you have enjoyed it so far!
@iamrichrocker7 ай бұрын
best bike and alternate car content provider on YT..i just like the low key style..informative wout a clown show..great video/editing....and spring is right around the proverbial corner..cannot wait!
@BrickHouseBuilds7 ай бұрын
Well thank you!
@chadmk2esky497 ай бұрын
Is this still the misses bike, or has it been so long that shes forgotten about it 😂 love the music, love the workmanship, you've inspired me to get back into my xj project thanks bj!
@BrickHouseBuilds7 ай бұрын
Well, thats a different story all together at this point. Glad you enjoyed though
@DonInfierno7 ай бұрын
Oh man! I love this song on 13:07! Nice video again! Much love from Brazil!
@BrickHouseBuilds7 ай бұрын
Glad you enjoyed!
@henryhawk9787 ай бұрын
Will be a sweet ride with everything cleaned up and out of the way . RIDE SAFE OUT THERE!
@mmnds2645 ай бұрын
Love the work, the info and the music. Super chill vibe
@BrickHouseBuilds5 ай бұрын
Glad you enjoyed!
@upchuckchops7 ай бұрын
"Hater Tears," is that a new energy drink? Love it! Nice little Easter egg there.
@BrickHouseBuilds7 ай бұрын
Glad you caught it! 🤣
@stevenwarner73487 ай бұрын
Master Class ~ Master Class ~ Master Class ~ Master Class. BJ, I have the "very clean" 1998 Suzuki 1200 Bandit on my trailer, tucked in on my driveway. Again and again I ponder the 22 mile speedometer. I look and I look, I think 22K is about right for actual mileage.But who knows? It is for sale. My buyer may arrive for a half price deposit on Saturday. Then he has to pick it up with the remainder in 10 days or I keep the deposit and the bike. So there it is, maybe he'll try to lowball me more whatever. Not gonna happen. I just need to get my Nighthawk on the road. I have a plate for that. Just slap the plate on and take her out. Definitely the name is "West Virginia." Then the Bandit. Hmmm So tempting just to keep that and kite the cost. OK Ok Ok ~ That's my report. Now for your Master Class! Thank you for sharing all that you do! Steve from New Hampshire.
@keithagn7 ай бұрын
Nice job, and very well done! I don't mind your music choices, and I saw The Beatles perform in 1964 when I was 11😂 Regards from Canada 🇨🇦
@BrickHouseBuilds7 ай бұрын
Well thank ya and I love that time reference lol
@donreinholz81217 ай бұрын
Great fab work BJ. Attention to detail. Music was also groovy.
@BrickHouseBuilds7 ай бұрын
Thanks Don!
@jeffferguson8997 ай бұрын
as an alternative to silicon spray, dielectric grease is also a great lubricant and preserver of rubber
@BrickHouseBuilds7 ай бұрын
Yeah this was closest in hand lol
@okckent4 ай бұрын
You’re a talented builder, I have great respect for your skill. I think your 70’s porno movie music works well!
@BrickHouseBuilds4 ай бұрын
Haha thank ya and glad you enjoyed!
@Jim-nm1en7 ай бұрын
An engineering company I worked for before I retired had a machine that would be great for some of the things you make. It was a CNC water jet profile cutter. Do your drawing on the computer screen and let the machine cut out the part for you as well as doing any bolt holes etc. You have such a creative mind, so this type of equipment would probably make your life a lot easier.
@BrickHouseBuilds7 ай бұрын
Well I see the benefit but in the time it takes to draw it on a computer and send it off to be made I can have it done already
@BIBIWCICC7 ай бұрын
Rectifiers are finned to dissipate heat, that’s why they are usually found in front of the engine. Placing it there will make it prone to failing.
@BrickHouseBuilds7 ай бұрын
That location may be true on some Harleys but most all Japanese bikes have them mounted behind within a box. This is also a modern mosfet unit that runs cooler. No worry of failure in this extremely open area.
@S2NAZ7 ай бұрын
🖕🏻 the haters. Your videos are excellent BJ, don’t change a damn thing 🫵🏻👊🏻
@micksterboone45177 ай бұрын
Nice fab work. I like the music fwiw.
@BrickHouseBuilds7 ай бұрын
🤘🤘
@elfiasco787 ай бұрын
The position of the ignition lock in the near of the kickstarter is interesting. Greetings from germany.
@BrickHouseBuilds7 ай бұрын
Yup, I always have them on the right or on the bars. Don't worry the Kickstart is not close to it
@william13897 ай бұрын
Nice work, dude! Again.💯👍
@BrickHouseBuilds7 ай бұрын
Thank ya
@richardhorton257 ай бұрын
Reg/rec units usually earth through the aluminium finned casting, the LH end cannot be the earth as the mount is a touch locator so the RH end will be the earth point. A rivnut will usually be an aluminium part fixed to the frame bracket, so the earth path from the reg/rec will be aluminium casting, to steel bolt, to aluminium rivnut to steel bracket on the chassis. There will thus be a lot of opportunity for galvanic corrosion. Can I suggest you weld a captive nut on the back of the chassis bracket to limit the galvanic corrosion to the steel bolt to the aluminium finned casting.
@BrickHouseBuilds7 ай бұрын
These units don't ground through the case. I wouldn't be using an aluminum nutsert just due to strength. It would be a steel one if I did but the most likely option is to weld a nut on so I can retain a flat surface
@kristiansandsmark20487 ай бұрын
Love the videos. I now want to buy a old bike, and make it look new in a old way.
@BrickHouseBuilds7 ай бұрын
Do it! I'll be a bad influence!
@Cochise6-6-67 ай бұрын
Sweet BHB!
@benjaminholt42927 ай бұрын
Best Missouri KZbin channel in my opinion!
@BrickHouseBuilds7 ай бұрын
🤘🤘
@lomsen797 ай бұрын
Nice fab video. Love fab stuff. And in metric.. Love it💪
@BrickHouseBuilds7 ай бұрын
Glad you enjoyed!
@peteraitken64947 ай бұрын
Hi BJ nice fab work looks neat and tidy ,the music never bothers me I quite like it as you never have it too loud to not hear what you are saying , the bike is going to look great when all finished with the new changes you are doing to it take care and have a great week ahead 👍👌🏍️🏍️🔧🔧🔧❤️🏁🏁
@BrickHouseBuilds7 ай бұрын
Much appreciated 🤘
@adventurerider1057 ай бұрын
Great so Far
@BrickHouseBuilds7 ай бұрын
🤘🤘
@irocss857 ай бұрын
Awesome stuff. Can't wait to see the battery one. On my cafe build i went with a very small lithium battery under the seat because my project came with that tiny battery. Now I find out they don't make that tiny one any longer. So I might need to utilize the area you've mentioned for a outta site location since bigger batteries won't fit the space I built my seat pan around
@BrickHouseBuilds7 ай бұрын
You may check out the 5 series from earthx. They are tiny and powerful and high quality
@jefft46297 ай бұрын
Very nice, thorough tutorial BJ!
@mikerider587 ай бұрын
Love your work BJ but im concerned about the location. Will this be ok riding through deep flood water 💧 🤔 Shouldn't electrical stuff be under the tank or seat. We get a LOT of rain in Ireland and are used to riding through floods.
@BrickHouseBuilds7 ай бұрын
Not riding through floods or rain. We get dry days here in the US
@cainbeeping84807 ай бұрын
Looks great
@BrickHouseBuilds7 ай бұрын
Thank ya
@remfanuk19706 ай бұрын
lovely to watch your skills...inspirational. do you think you might experiment with Cerakote in the future? just thought of that when you mentioned painting the brackets.
@BrickHouseBuilds6 ай бұрын
I used some cerakote on a previous build and likes it a lot.
@motorcyclerewind7 ай бұрын
Great video. Really enjoyed it.
@BrickHouseBuilds7 ай бұрын
Thanks dude!
@michalaugustyniak64497 ай бұрын
Awesome
@BrickHouseBuilds7 ай бұрын
🤘🤘
@jp22467 ай бұрын
Clean!
@BrickHouseBuilds7 ай бұрын
Thank ya!
@arthurzielinski81877 ай бұрын
Good stuff, dude 🤘🏻
@BrickHouseBuilds7 ай бұрын
🤘🤘
@chamalsachin7 ай бұрын
❤
@roamingearth9157 ай бұрын
Very best :) 👍
@rsc68er7 ай бұрын
I never noticed the music before. Music only annoys me if I cant hear the person talk and don't ever remember that being a problem here.
@BrickHouseBuilds7 ай бұрын
I've always been good about not putting too much music over me talking but many have a problem with any music at all
@irocss857 ай бұрын
*can'T I bet you meant to say?
@rsc68er7 ай бұрын
@@irocss85 thank you
@rsc68er7 ай бұрын
@@BrickHouseBuilds I gotta say you made me laugh the way you were taking the piss out of yourself. Brick House Builds DJ. Rock the house down or the workshop...lol
@JamesColeman17 ай бұрын
Did you think about using an old socket over that welded nut as the counter stabilization?
@BrickHouseBuilds7 ай бұрын
No as the tool steel is much harder to cut/modify and the piece of tubing was an easy solution
@robertboyer54987 ай бұрын
Can you tell me which exact electrical system you bought? That website is awkward. I’m just trying to get a more reliable system for my XS400. Thanks.
@BrickHouseBuilds7 ай бұрын
I actually have a full electronic breakdown in a previous video of this bike that will be helpful. As mentioned in this video though it is an X21 Plus P.
@robertboyer54987 ай бұрын
@@BrickHouseBuilds thanks. I have a squirrel attention span so I must have missed it. 😂
@jerrybigrig7 ай бұрын
😎👍😎
@BrickHouseBuilds7 ай бұрын
🤘🤘
@ArnarHugiBirkisson7 ай бұрын
Are the NWT electronics no longer available in Europe?? I was just about to place my order for my x21 and now it says no longer available in your region :( Do you have any info on this?
@BrickHouseBuilds7 ай бұрын
That I don't know. Normally you would select your region on their website. They would be the ones to ask
@ArnarHugiBirkisson7 ай бұрын
@@BrickHouseBuilds Thanks for your reply, I have received feedback from the manufacturer they have been extremely helpful. For anyone finding this comment NWT it’s no longer selling in Europe due to various restrictions and tariffs.
@irocss857 ай бұрын
Also I'm 50 and the music doesn't bother me. The only time I protest is if the music is under commentary, but then the music volume is too loud to hear the commentary. I hate when creators do that. Lol.
@BrickHouseBuilds7 ай бұрын
Thats fair and definitely a skill I've learned. The difficulty I had was how it sounded on my computer speakers compared to how others may watch it. Hard to judge. I do my QC by watching on my tv
@jp400motox5 ай бұрын
Idk why people dislike music in a video, Esp when it's during a montage or something... weird.
@BrickHouseBuilds5 ай бұрын
It definitely happens a lot.
@lauriehammer50957 ай бұрын
This Boomer loves the music.
@BrickHouseBuilds7 ай бұрын
Right on!
@sabrinaelouiserichardson99387 ай бұрын
No avocado toast, WHAT will they do
@BrickHouseBuilds7 ай бұрын
Imma starve!
@PietScheffer6 ай бұрын
Me do like but I don´t like where you put the key....too close to the kick
@BrickHouseBuilds6 ай бұрын
It isn't close when you use the kickstarter. Definitely made sure of that
@jimclarke11087 ай бұрын
Perfect repair, exactly how i would have done it..................🛵