Xs501 pcp vs co2

[@davidbooth60]

Very interesting review That's got rid of all ideas of PCP ING my qb78 which after tune now does 12 ftlb

[@norfolkairguns]

Yer I would leave it alone for sure worth doing

[@Northernedc]

Bigger question is, is the gun worth it 😬. CO2 never worth the money in my eyes. Easily pick up good quality break barrels for price of one of these let alone 2. you then add the adapter price you can buy a 2nd xm1 which for the price are outstanding not my cuppa tho. Cracking vid tho fella

[@norfolkairguns]

It’s a ok rifle does stick to it as a co2, it’s a good rifles for start with as a bigginer / junior shooter / garden plinker but other then that it’s not much good for Anthony eles to be fair, it’s a good rifle but as you said you can get a good springer for the same price

[@African-Budget-Pellet-Gunner]

I think the pressure on the PCP was way too low, co2 average pressure is around 90bar so if you pump the PCP up to around that 90bar mark it should have similar power. The problem on the PCP yhough will be it is unregulated so will only give a short consistent shot string

[@norfolkairguns]

I was Just going by the manufacturers notes but worth a try

[@jamiechurchman8269]

Im surprised u didn't tell the story on why it was converted 😂

[@norfolkairguns]

😀

[@danielcosta3637]

Please, which one is more silent?

[@norfolkairguns]

Both of you fit a silencer but I wouldn’t concert it form co2 to pcp

[@StuLau]

Something is wrong with the gun on pcp. You need to check the fill pressure etc…

[@norfolkairguns]

I am going by that the manufacture says

[@briandix216]

Camera didnt clearly show the complete co2 auto valve set up after loading up the 2 co2 cartridges and screwing the caps back on to prime the gun. Could you re do it again slowly please. Yep the pcp version of the gun looks poor indeed.

[@norfolkairguns]

Give me a few days as I have a lot of work on at the moment but I shall get it done and post as a short for you

[@briandix216]

That would be good thanks. Will you ever do a review of the .177 version of the xs 501 do you think? Never seen a .177 review for this gun, or is it because it's too lower power?

[@norfolkairguns]

If I can get my hands on one I can do one that’s not a problem

[@nadiamontague722]

Where did you get the adaptor?

[@norfolkairguns]

Trrobb

[@batwingbrit]

I would not like to fill any gun with 950 bar my friend it will blow like a bomb , you mean 950 PSI

[@davidvanhinsbergh2444]

950 bar 65 psi ?

[@norfolkairguns]

That’s how much air pressure it can hold 950 psi ( pounds square inch ) is 65 bar

[@davidvanhinsbergh2444]

@@norfolkairguns l though that's what you ment it's just half way through the video you get it back to front. I used to convert years ago smk X's 79 to hpa it's easy , use a 1 ci 3000psi bottle which is regulated to 600 psi which is what pressure co2 works at

[@markhomer5704]

65 bar????? No wonder it was putting out 3.3 fpe, bottom line for a PCP is around 100 bar..

[@norfolkairguns]

Correct ☑️

[@CharleneRees-g8j]

Shit with a stock

[@norfolkairguns]

Not the greatest that’s for sure