Yamaha XT 600 motorcycle full engine disassembly timelapse.
Пікірлер: 34
@amidointhisright2 жыл бұрын
I just got an XT600 less than a week ago, this video is a fantastic reference
@jh-tech55462 жыл бұрын
Thanks for your comment.
@amidointhisright Жыл бұрын
@@jh-tech5546 I finally worked up the courage to tear apart my engine and replace the sheared drive shaft the previous owner welded and left for me to figure out. I used your video a LOT leading up to this moment and it really helped push me over the edge to undertake the engine rebuild. Thank you again for documenting your teardown.
@genefogarty53952 ай бұрын
@@amidointhisright Are you in the U.S.? I can't find quality parts anywhere here, suggestions?
@MrDillemille Жыл бұрын
Great video! So many parts and details that I get scared to do this alone!
@jh-tech55469 ай бұрын
Thanks!
@anasimonaityte4107 Жыл бұрын
Thank you from Spain 🤝🤝🤝
@zambocinquantadue6911 Жыл бұрын
Io ammiro chi fa questo lavoro e mi chiedo come si fa a non dimenticare di rimontare un rasamento o una rondella o una coppiglia o una guarnizione o un O ring. Siete dei fenomeni 👍💪🇮🇹
@TheodoreAndor10 ай бұрын
You definitely know what you are doing! I can see you have lots of experience for sure. Wow good video Thanks
@jh-tech55469 ай бұрын
Thank you!
@Puntism Жыл бұрын
Fantastic video, thank you! If you reassemble please, consider doing a video on that too.
@jh-tech5546 Жыл бұрын
Thank you! I disassembled his engine o get some internal parts to rebuild another engine. I is on the planning to film it when I assemble it but it will take some time.
@MrSk8JOE Жыл бұрын
amazing nice job
@sergiotish Жыл бұрын
Gracias por el video
@azucenaguerrerosantos93469 ай бұрын
Gracias
@traumhausparaguay57347 ай бұрын
Espero que pueda volver a juntarlos
@kmasfalto Жыл бұрын
nice tenho uma
@jorgedarioalonso8233 ай бұрын
Hola amigo me gustaría comprar uno de esos, de donde se compra amigo usado
@marciodasilvaluciano64799 ай бұрын
Faltou gente assim
@Lairy67 Жыл бұрын
Great video, I’m having to strip my engine down as the gearbox is knackered would I have to strip it totally or could it be done by leaving the left hand side of the engine intact ? Thanks.
@jh-tech5546 Жыл бұрын
You mean by leaving the flywheel on the crank and even maybe the cover on the case? That might be possible. I don't think there are bolts behind that hold the cases together.
@Lairy67 Жыл бұрын
@@jh-tech5546 thanks, gonna be one hell of a job !
@francescosalvioli Жыл бұрын
Hi JH-TEch, compliments, very nice and clean job! where are you located?
@bartconnors76952 ай бұрын
Great video! I have a 1984 XT600 that I love, but it has almost 50,000 miles on it now and is beginning to leak oil from what looks like the head gasket. Is it possible to replace the top end gaskets without removing the engine? Thanks!
@jh-tech55462 ай бұрын
Thanks for the comment. I did not have the engine in the frame but what I can see from this video it is possible: kzbin.info/www/bejne/aJiQmXqBarBqfck
@colefrench5896 Жыл бұрын
Just wondering what tool did you use to pull the flywheel? It looks like a harmonic balancer puller but my bolts are too short to thread into the flywheel all the way
@jh-tech55469 ай бұрын
Sorry for the late reply. As you could see I did struggle. The tool that did the job was the flywheel puller sold by YAMBITS.
@sagevaldez57438 ай бұрын
Would it be possible to change the gasket on the side of the engine without taking the engine out of the frame? I’m new to fixing bikes and some guidance would be very much appreciated
@jh-tech55468 ай бұрын
I guess you mean to remove the clutch cover. Yes I think that is possible.
@gongusdeedeetow15104 ай бұрын
Hey so does the top part where the valves go. Does that just not have a gasket? I’ll be tearing mine out to change valve seals and can find a gasket. Is it okay that way? Would liquid gasket work?
@jh-tech55464 ай бұрын
Yes, there is no gasket but you need to apply some liquid gasket (suitable for engines) to the gasket surface.