Zeitraffermovie einer Restauration der XT600 Typ 2kf Musik: The Pike u. Wolfgang
Пікірлер: 183
@panayiotisgiannikos63378 жыл бұрын
Well, I have to admit that I watched the video 2 times already and this is the 3rd. I also enjoyed the music. Epic music for a legendary bike and a heroic restaurateur. Well done, buddy!
@Mandricity8 жыл бұрын
thanks!
@lanceorlando56573 жыл бұрын
instablaster...
@afherrera446 жыл бұрын
Tu eres una inspiración para todos los que prefieren arreglar, rescatar a estas joyas. Que un día fueron las mejores motos del mundo. Felicidades!!!
@antoniocaballero42075 жыл бұрын
Hola! Acabo de comprar una. Alguien tiene libros de la mecánica de la moto?
@laconfreriedesimbeciles82493 жыл бұрын
Amazing work, amazing edit, for an amazing bike. The final result is just so beautiful, great work!
@Mandricity3 жыл бұрын
Thanks!
@buckbundy86425 жыл бұрын
I have a 1988 XT600 with less than 9000 miles on it. Garage kept. With Super Trapp exhaust system. I’m going to repaint the frame, tank, and refinish the plastic. Your video gives me drive to do mine. 👍🏻
@Mandricity5 жыл бұрын
glad to hear that
@Bootvirus18 жыл бұрын
Faszinierend, eine Wahnsinnsarbeit, Hut ab! Du kannst dich glücklich schätzen, dass deine Frau dein Hobby nicht nur akzeptiert, sondern auch noch selbst fleißig mitmacht, auch ihr meinen größten Respekt! Lediglich die abgewetzte Sitzbank hättet Ihr bei dem ganzen Aufwand und Kosten auch noch neu beziehen lassen können.
@Mandricity7 жыл бұрын
Moin. Sitzbank kommt hoffentlich auch noch neu bei Gelegenheit. Technik war erstmal dringender... ..und erstmal teuer genug... :-)
@Herzankerkreuz676 жыл бұрын
Awesome bike, I had one 1988-1991, red white, never let me down 👍
@Mandricity6 жыл бұрын
Yeah i love it too.
@mike3004066 жыл бұрын
I preferred the 84 up to 87-88 the red - white the 6 gear model blue 1 had e start but you couldn't put after market pipes on it well they didn't makem back then for it it just wasn't the same bike they made the xt 350 the same up till 95 I think gotta remember I'm talikn Ontario - Canada I no different places they got different model's etcetc but hear cut off 1990-91 I think they didn't make 1 for approx. 3-4 years then they came out with that blue 1 the older 5 gear could of used a 6th or a taller 5th it seemed like it was gonna blow on the hwy I lit a cigarette off of 1 once that's how hot it was air cooled they got hot 20 - 40 yamalube I ran in mine changed it every 4 thousand max if they had a semi back then like a 15 40or 15-50 would of ran that don't think they did
@stefanomorandi715010 жыл бұрын
bro, you're a master in your art! marvelous job!
@Mandricity7 жыл бұрын
Thanks!
@denisstoica56325 жыл бұрын
Buna cine poate sami dea si mie un sfat am si eu acelas motor si nu mai porneste mio dat niste rateuri si acum nu mai da scantei va rog datimi un sfat
@etiennelauvergnier65415 жыл бұрын
Nice job, nices timelaps. Congratulations, very friendly bike.
@Mandricity5 жыл бұрын
Thanks!
@41supermoto7 жыл бұрын
Wahnsinns job hab selten so ne gut restaurierte xt600 gesehen
@Mandricity7 жыл бұрын
Vielen Dank
@DawidMnichW10 жыл бұрын
great job, congratulations !!
@robininthehood26063 жыл бұрын
2kf is the best XT600 forerver 👍👍👍
@TigertrailCh9 жыл бұрын
Sehr, sehr geil gemacht! Klasse Arbeit, Respekt. Bin grad zwei 87er XT600Z am restaurieren.
@paulthompson8613 Жыл бұрын
Awesome work
@thodoris37906 жыл бұрын
awesome guys!xt '89 the best...i really admire this knowledge to restore. i ve got an xt600 2003 black, i turn it to white,i found plastics,which is in very good condition,but i really like this old xt...the 1989!
@Mandricity6 жыл бұрын
we like it too ;-)
@N_Duro9 жыл бұрын
geiles Nummernschild und super Arbeit, Respekt!
@GonzoRibeiro5 жыл бұрын
Hey man, you're a magician!! Come to Portugal and do the same to my bike😁😁.Congrats on a great project.
@Mandricity5 жыл бұрын
;-) thanks
@guilhermepaixao11024 жыл бұрын
@@Mandricity ou ao governo!ia dar un jeitasso!😂😅sehr gut gemacht
@Emopesca6 жыл бұрын
Ich habe auch einige 2kf Restaurierung Ich bin nie zum ersten Schuss gegangen, du bist wirklich ein Meister
@Mandricity6 жыл бұрын
;-)
@vlastaw737 жыл бұрын
Nice. I have the same motorbike. I love it.
@w5a8d77 жыл бұрын
Sehr Cool!! Du hast mich motiviert meine 3WS-002157 XT-500E (Ösiland) Bj. 91, mit >85.000km am Sattel, einen kompletten Overhaul zu unterziehen. Danke für das Video & Grüße aus dem südlichen Nachbarland :-)
@Mandricity7 жыл бұрын
Moin. Das freut mich! Dann wird ja wieder das Leben einer dieser schönen alten Kisten verlängert. Viel Spass damit. Grüße zurück aus dem Norden
@MrDead28space7 жыл бұрын
Das Ergebnis sieht echt gut aus. Dazu braucht man nicht nur gutes Werkzeug und ne Werkstatt sondern auch Ahnung. Besonders im Motorbereich und die Kabelwirtschaft
@Mandricity7 жыл бұрын
Danke für deinen Kommentar. Manchmal brauchte ich aber vor allem viel Geduld bei den vergammelten Schrauben... :-)
@ON-ll4us4 ай бұрын
Lief ja mega eazy an. Respekt :)
@maex15784 жыл бұрын
Super Arbeit.
@Mandricity4 жыл бұрын
Danke
@angelochiazza23837 жыл бұрын
ohne Worte einfach Hammer!!!
@fistos93406 жыл бұрын
Exelente !! Saludos desde Argentina.
@user-mk8ru6vg7d Жыл бұрын
πολυ ωραια δουλεια φιλε.μπραβο σου.
@vmgarcesc6 жыл бұрын
muy bien amigo yo compre una y voy haver lo mismo saludos desde colombia.
@xirgui5 жыл бұрын
You are a genius!!
@Mandricity5 жыл бұрын
I don´t think so. Just passion...
@Emopesca6 жыл бұрын
Sechs wirklich außerordentlich zu Naples sagen wir: Sie er starker guaglió 👍👍👍👍
@Mandricity6 жыл бұрын
Und genau so würde ich auch dazu sagen, glaub ich... ;-)
@DavidZepp7 жыл бұрын
great project!
@TheCarozz5 жыл бұрын
Very great job, you are perfect in any part of mechanical difficulty, also your cigarette is nice ahah
@Mandricity5 жыл бұрын
;-)
@dartmoor10095 жыл бұрын
Great video, just about to start a 1980 DR650RS rebuild.
@davidcid93197 жыл бұрын
hope one day you,ll make a detailed video xt 600 restauration. Not a 10 minutes video but a 10 hours video or whatever it takes you to restore it. no cuts or fast foward. we would love to see the proccess step by step in real time. you can cut the video in 10 pieces one hour each or something. it would be awesome.thanks
@Mandricity7 жыл бұрын
10h video? maybe, one day...
@honestbob456 жыл бұрын
Or maybe a very detailed xt restoration manual? i'd pay very good money for such a thing!
@1stberlinboy8 жыл бұрын
Ist das ein geiles Projekt und ein super Video. Mit Kommentaren wäre es jedoch noch schicker!
@fidanhyseni6662 жыл бұрын
Great job 👏
@manoliscarrentalkarpathos58346 жыл бұрын
Very nice video!!!!
@Mandricity5 жыл бұрын
Thanks
@NeyRobsonRLima7 жыл бұрын
I can no longer think of selling my xt600 3tb 94 after seeing this video !!!!
@Mandricity7 жыл бұрын
Right!
@Pepeboyington716 жыл бұрын
Perfekte 👍
@Emopesca6 жыл бұрын
Ich habe auch eine Restaurierung gemacht, die nicht so ist wie die von Ihnen. Niemand hat bei der ersten Aufnahme angefangen, auch nicht im zweiten, vielleicht sogar im zehnten. Hahahaha💪
@spacecowboy39924 жыл бұрын
Great job! How do you adjust the auto decompression cable on the xt600? I can’t find any service procedures or specification to this. Any help would be great!
@Mandricity4 жыл бұрын
there is an adjuster screw in the middle of the decomp cable. Free play of the decomp lever should be approx 2mm
@wursthunter8 жыл бұрын
XT's werden uns alle überleben!
@Mandricity8 жыл бұрын
Das hoffe ich doch sehr! ;-)
@czyzenski9 жыл бұрын
Very good job! =)
@savvasmarkos23124 жыл бұрын
I love my XT 600 motar my forever bike
@IbraXT600E5 жыл бұрын
Fantástico 👏👏👏👏🇧🇷🇧🇷🇧🇷
@Wagnermt6005 жыл бұрын
Estou restaurando a minha estou muito feliz com o resultado ela é uma excelente moto Mais a sua tá linda
@chagas7346 жыл бұрын
Sem palavras.....d+
@sbanditos745 жыл бұрын
genio !!! non e da tutti fare dalla A alla Z !!!!
@Sidney_blue4 жыл бұрын
Muito bom. Bela terapia.
@walterfabianodeandradebenn11773 жыл бұрын
Essa tava cansada de dias 😁😁😁😃🇧🇷👍👏👏👏
@ulyluy7 жыл бұрын
Hey that's a wonderful job, i have the same model sitting since last year and i wish i could do the same as you, how long time did it take you? and how much did you spend? i hope to find the courage to do it too!! :)
@Mandricity7 жыл бұрын
I don´t know exactly, it was arround 2 years and i spend way to much money. It´s nothing worth it, you make no deal when you make such restauration only for selling the bike... But it was fun and that is the main thing.
@alxx13782 жыл бұрын
14 years xt550. There was no plastics on the tank to break.
@evgengolik225 жыл бұрын
Bravo!
@garyhoward40645 жыл бұрын
Lovely work and like also how you adapt the music (classical..). My XT600 engine is ready for shipment, if you are willing to take it for full conversion to 700..
@Mandricity5 жыл бұрын
700cc ? That much?
@julianoboell2607 жыл бұрын
perfect
@Mandricity7 жыл бұрын
thanks
@merkaradag32576 жыл бұрын
Tebrikler, harika, müthiş!
@antimopiccirillo42145 жыл бұрын
👏👏👏👏👏👏👏👏👏
@lacaver645 жыл бұрын
good motorcicle the yamaha 600 4t I has it one the model was 1990 and in blue fantastic bike ,but I havent see in your motor the electric starter?good luck with him
@Mandricity5 жыл бұрын
My model is 2kf. There never was an e-starter on it. First normal XT600 with E-starter was 3tb from late 1990/91 to 2000something...
@claudiomenezes81508 жыл бұрын
the best,show
@larscajvall58044 жыл бұрын
Bravo!!!!!
@Mandricity4 жыл бұрын
Thanks
@campeonin4 жыл бұрын
Great job!! How much oil is necesary when you change oil, and oil filter in a 2kf model? Greetings from Spain!!
@gamingdelux00787 жыл бұрын
Good job :)
@zdenekhorak44717 жыл бұрын
dost dobře natočený!
@antoniocaballero42075 жыл бұрын
Hi there! Great job! How long did it take you to finish the bike?
@Mandricity5 жыл бұрын
It was a complete year but just only weekend job...
@joellamers43843 жыл бұрын
Hi! Ein super Video. Auch die Motorenüberarbeitung! Du machst das nicht zufällig auch gegen Geld? :D Hab auch ne alte XT hier stehen und würde sie gerne wieder so schön machen wie deine hier ;)
@marco-giardini3 жыл бұрын
a beautiful girl helping you is ....amazing!
@Mandricity3 жыл бұрын
If she wants to drive it - she has to know how to fix it. (old saying in germany ;-) )
@nandosouza85105 жыл бұрын
Gostei vcs são bom no que faz
@larscajvall58046 жыл бұрын
Love it!!!!!!!
@mauriziopalladino26627 жыл бұрын
Molto utile
@pippuzzu19817 жыл бұрын
Hi Mandricity,ich habe ein Xt 600 2kf mit 58.000 km gekauft was gemacht wurde und ob uberhaupt das motor schon geöffnet wurde (keine rote oder schwarze paste zu sehen) weiss der vorbesitzer nicht.Er hatte nur seid ein ja (da motorrad ist von '89 also 30 jahre alt.Sehr schwer die ganze geschischte zu kennen. Er hat gar keine werkstatt-reschnung,weiss imprensiv,garnichts. Das motor kling gut aber 58000 fur ein einzylinder sind recht viel. Da ich von Hannover nach Italien fahren will wunderte mich ob es zu empfehlen ist mit ein motor denn ich garnicht kenne. Was wurdest du machen ausser ölwechsel,ölfilter und luftfilter? (bremse sind ok) Einfach zu werkstatt bringen und fur check up oder aus sicherheit irgendwelche bestimmte teil tauschen? Kuplung ist ok und steuerkette macht keine gereuche
@dennisss12885 жыл бұрын
Richtig cooles Video , Ich habe auch ein Video in der ich meine xt vorstelle.
@francisco100m5 жыл бұрын
Top
@45hambaga6 жыл бұрын
good bike
@keithsage15933 жыл бұрын
I wish my snow blower started like that.
@jpdupont90305 жыл бұрын
My 1VJ start only with "start pilot" gas even if the the gasoline go to the carburator bowl (I cleaned all of it and I bought the special kit) but without start pilot gas impossible to start the engine. Do you know why ? Thank you in advance for the help ( I don't know what to do)
@Mandricity5 жыл бұрын
something wrong with the choke... Hard to explain for me in english
@graphisteseb83154 жыл бұрын
Hello, where did you buy your engine parts ? Bearings, piston, gaskets, etc. Yamaha parts are quite too expensive...
@Mandricity4 жыл бұрын
Many different Dealers in WWW
@edu09054 жыл бұрын
Hi friend. Is that smoke after starting up normal? I restored one and when it starts up a lot of smoke comes out of the exhaust pipe
@Mandricity4 жыл бұрын
If you installed the piston with lots of oil (which is good) then you have big smoke right after the first start but it should disappear after seconds. If you have always smoke after start then something is wrong...
@alejandrogarrido7817 жыл бұрын
I got my first xt600e 1998 today but it's vibrating too much how can I do with those problems? Thanks in advance
@Mandricity7 жыл бұрын
Your XT is a model 1998 but your engine is based on a construction from the 70´ It has to be vibrating. ;-)
@claudemirmiranda14826 жыл бұрын
Tenho uma xt 600 porque será que o carburador da presao pro lado do filtro ele tinhaque sugar ne
@walek8094 жыл бұрын
👏👍
@hanyafifi72608 жыл бұрын
good gob
@niklasvesely66577 жыл бұрын
Hallo, tolles Video!! Ich habe mir gerade eine XT 600 in Teilen geholt und habe mich gefragt, ob du mir vielleicht sagen könntest, was der Zug ist, der entgegengesetzt zum Dekozug weggeht, bzw. wohin er geht? Vielen Dank im Voraus😊
@Mandricity7 жыл бұрын
Hi, danke. Der Zug der entgegengesetzt zum Dekozug weg geht?? Es gibt an der Stelle nur einen Zug (Dekozug) der geht von unten vom Kickermechanismus nach oben zum Ventildeckel um dort drinnen beim kicken im richtigen Augenblick ein Auslassventil zu betätigen. Autodeko genannt.
@catwiesel9710 жыл бұрын
Coole Mütze ;-)
@Mandricity7 жыл бұрын
Nicht wahr? ;-) Bis Samstag...
@manuelbernal51743 жыл бұрын
Como sacar los bujes de la base del mono shop ósea la parte más pequeña de la tijera sabe en brazo mas pequeño tiene un vídeo de ese trabajo amigo del xt 600
@kingtervel3666 жыл бұрын
I totally lost my words! Hey guys, I am thinking of buying an used XT 600. Is the engine durable and reliable? What is the engine lifetime measured in thousands of kilometers? Thanks.
@Mandricity6 жыл бұрын
It depends, something between 40 and 100...
@kingtervel3666 жыл бұрын
Yeah. Well, that is a good answer. I have a repairman friend who advised me about the selection of second hand motorbikes. His advise was not to buy anything with more than 40 000 km on the clock. Thank you for the response.
@marcin38126 жыл бұрын
:O NICE !!
@justwest3 жыл бұрын
Was genau ist das bei 8:00 ? Würde auch Aluminium Tape alleine ausreichen bzw. schon helfen?
@Mandricity3 жыл бұрын
Das ist Glasfasermatte. Nur Alutape hilft nicht wirklich
@vip80544 жыл бұрын
😀😀
@Negronemshow6 жыл бұрын
XT show huashuashuas 😎
@michaelroth85686 жыл бұрын
Wo kann ich eine Liste finden mit all den Arbeitsschritten und Teilen die für so eine Arbeit nötig sind? Wie viele Stunden habt ihr daran gearbeitet? Was sind die Kosten für so eine Restauration?
@Mandricity6 жыл бұрын
Eine Liste mit allen Arbeitsschritten für eine komplette Restauration meinst du??? Mein Gott wieviele Tausend Seiten sollte die denn haben? :-) Da ich fast alles selber mache ausser Zylinder hohnen sind da wohl so 250 Stunden drin. Bei den Kosten kommt es stark auf den Zustand des Materials an. In der blauweissen stecken ca 1800 Euro und es fehlt noch eine neue Sitzbank und Edelstahlspeichen. Wenn man alles macht kommt man nur sehr sehr schwer unter 2500 Euro, lohnt sich also eigentlich garnicht...
@matheusmaciel41773 жыл бұрын
I new have strong blaster power life motors
@lucapostoy18334 жыл бұрын
Hi, richtig cooles Video, aber könntest du vielleicht ein Video machen, in dem du zeigst, wie man den Vergaser einer XT 600 richtig anschließt? Ich kann nämlich kaum bis gar keine Infos dazu finden. Würde mich freuen.
@Mandricity4 жыл бұрын
Richtig anschliessen? Oder komplett zerlegen und revidieren? Beim anschliessen gibts doch nicht so viele Möglichkeiten. Gasseile, Benzinschlauch links aussen, 2 Überlaufschläuche mitte u unten...
@lucapostoy18334 жыл бұрын
@@Mandricity Genau, mir ging es jetzt nur um das anschließen. Denn meine XT wurde 1999 stillgelegt, und stand jetzt ca. 10 Jahre bei uns im Schuppen. Ich habe mir die jetzt als Projekt vorgenommen bis ich meinen A2 Schein 2021 machen werde. Der Vergaser war schon ausgebaut und dann habe ich den erstmal gereinigt. Weil ich den halt nicht selber ausgebaut habe, weiß ich natürlich auch nicht genau wie und wo der denn angeschlossen werden muss. Am Wochenende habe ich versucht sie anzukicken aber der Vergaser lässt scheinbar kein Benzin durch. Aber immerhin wollte sie starten, als wir Bremsenreiniger bei offenem Vergaser reingesprüht haben und das ist schon mal erfreulich nach 20 Jahren Standzeit. Also werde ich mir glaube ich noch mal den Vergaser vornehmen müssen. Gruß
@westsideryder92754 жыл бұрын
Stimmt es das die ansaugstutzen ab 1996 bei der xt verändert worden sind kleinere Durchmesser als bei einer 98er bj? Wenn ja woher bekommt man welche von einer xt 600 96er Baujahr? :o
@SoBoTa357 жыл бұрын
Hallo, ich bin ein Xt600 2kf Besitzer und ich habe Probleme damit und kann dir keinen Rat geben. Kannst du etwas tun, um mir zu helfen, es zu beheben?.... I form poland
@DudelPaul5 жыл бұрын
Wo Enduros noch geil waren. Heute gibt es nur noch Rotz.
@LeonardoSilva-lx2uz4 жыл бұрын
OLA EU TENHO UMA É ÓTIMA NÃO LARGO DELA JA MAIS 😉
@cjtb6668 жыл бұрын
What did you do to the plastics?
@limatango3738 жыл бұрын
I think he replaced the plastic parts.... I've been tryin' so hard to make them shine on my 2KF but there's no way.... I tried almost every product to restore plastic parts but none of them worked :-(((
@Mandricity7 жыл бұрын
Hi. I don´t replaced the plastics. I also tried so many products to let them shine but it was all crap. In the end i made an experiment with my hot air gun and that worked very good! Just use it like a paint gun. The surface melt a little and after that the plastics are nearly new. But be careful!
@limatango3737 жыл бұрын
I'll try.... a friend of mine has a hot air gun with a digital display showing working temperatures, could you please suggest a range of temperature to prevent melting? I am so scared to make damages....
@Mandricity7 жыл бұрын
The only way is: full power! The surface should melt a little bit! You have to use it like a paint spraygun, very short and never hold on a spot. You can see the surface get shiny in the second you hold it.
@fronteiraaiac66023 жыл бұрын
posta um video de como calibrar as válvulas
@user-kp5gd1fm8u5 жыл бұрын
😢👍
@fjmotorepuestos99723 жыл бұрын
Hallo Freund, ein Gefallen, denn mein xt 600 bleibt im ausgeschalteten Zustand nicht im Tank und der Füllstand kann nicht gemessen werden. Vielen Dank,
@Mandricity3 жыл бұрын
Das verstehe ich leider nicht....
@Bayoz74 жыл бұрын
What's that soundtrack? ❤️
@Mandricity4 жыл бұрын
discribtion...
@sungur7177 жыл бұрын
Mozart Turk Mars
@justwest4 жыл бұрын
Wieso Zylinderkopf nicht auch gestrahlt? EDIT: Sah bei 4:50 ziemlich verranzt aus, eingebaut dann aber nicht mehr.
@Mandricity4 жыл бұрын
Hab den Zylinder gereinigt und nach dem zusammenbau lackiert. Hält jetzt schon über 5 Jahre super
@justwest4 жыл бұрын
@@Mandricity Nicht gestrahlt? Danke für die Info!
@Mandricity4 жыл бұрын
Hatte auch befürchtet das der Lack, dadurch das noch alter drauf war, nicht hält. War aber unbegründet.
@justwest4 жыл бұрын
@@Mandricity Hast du denn einen besonderen Lack benutzt? Und wie sehr hast du die XT beansprucht in den letzten 5 Jahren? Danke dir!
@Mandricity4 жыл бұрын
@@justwest Das war ein Ofenrohr-Lack aus dem Baumarkt. Gefahren damit bis jetzt vielleicht 8000km. Hält immernoch... Mittlerweile benutze ich aber richtigen Motorlack in seidenmatt. Der sieht einfach besser aus.