XT660X x Akrapovič | FULLGAS ON TIGHT ROAD

Yamaha XT660X Akrapovič no DB killer.
Instagram: / ​
1080p 24fps chin mount, separate audio recording device.
CGI was used in this video and any stunts you see were performed on a closed course.

[@JohnWick-lh9gn]

That sound..Whew!!!! NiCE!💯💯🔥🔥🔥

[@christiandeleo7737]

Best sound.. I felt like I was riding it ❤

[@Ivanwrx]

awesome sound

[@ShadowRR]

Very nice video! Awesome sound and nice riding! Cheers!

[@fabianklein4432]

Thank you bro!

[@asleeperj]

I was thinking, man that thing is really moving for a single cylinder engine, then I realized it is in KPH.

[@lukamilenkovic3305]

Bro its a a2 bike with 48hp wdy expect

[@asleeperj]

@@lukamilenkovic3305 I had a single cylinder Yamaha capable of 105 MPH.

[@lukamilenkovic3305]

@@asleeperj thats good. But this xt660 that is on the video can go i think up to 110mph

[@asleeperj]

@@lukamilenkovic3305 That is the bike I had. If you gear it out you can get 125 MPH, but without supermoto tires it is a bit sketchy on the highway.

[@ApocGuy]

@@asleeperjXt 600 was 90-100 mph back in the 90's...

[@ruulgamba]

Nice sound! This bike sounds so loud with no dbkiller although I own one with gpr exhausts. I think your clutch is quite at the end of its life, isn't it?

[@fabianklein4432]

Thank you bro! Well not really sure, it isnt slipping yet but it has 46k kms on the clock so it is possible that the clutch will go. But wheelies are still easy and it doesnt slip

[@ruulgamba]

@@fabianklein4432 oh so maybe is just the way you release it 🤣 mine has 71k km and I don't really know if it has been replaced, I bought it with 59k. Enjoy!

[@fabianklein4432]

@@ruulgamba thats crazy that these bikes have such a reliable engine, love it. And i think it sounded like it was slipping because i held the clutch a bit in on the first wheelie when i shifted into second gear

[@Patrick-qj9zz]

i have the gpr furore on my xt, but i can't get the db killer out...any help?

[@ruulgamba]

@@Patrick-qj9zz you need a circlip plier

[@Akromis]

sound😍

[@bphd_trucker]

I love it♥️

[@jingarasek1745]

Na téhle jsem se taky párkrát svezl :D

[@motormullie3404]

great riding and bike man! im planning on getting a mt03 for my a2 in about 1.5 months after riding a 125cc for 2 years. cant wait for the torque difference ;)

[@fabianklein4432]

Thanks man! Great choice, i also started on a 125. The power on a2 bikes is crazy compared to 125 :) Ride safe bro

[@motormullie3404]

@@fabianklein4432 thanks man, you too

[@mirkoxt660x2]

Gas gas gas!!!

[@vincelrodbel2411]

Bestial

[@lahrichiayoub5185]

i love it my dream bike

[@fabianklein4432]

Thx bro!

[@matthewhogg157]

How do you like those bars over stock? I was thinking of changing to a slightly narrower width with a bit more rise but so many options… let me know your recommendations

[@fabianklein4432]

Gotta say i love em. I chose these protaper contour carmichael bars because i wanted to get rid of the beam in the middle of the stock ones because it just didnt fit my hand and key very well. I can tell that they are the same lenght, i believe 800mm but they are a lot straighter, so more of a dirtbike feeling which i instantly fell in love with. I had renthal bars on my previous bike, which felt the same but they had the middle beam. So if im ever going to get a different bike i will 100% buy these protapers again. And i believe they have a ton of options of the countour bars, and the difference is height i believe. They have a description of them somewhere and mine are called Contour Carmichael

[@carlosalbertosuarez5090]

Bacano...

[@rossmcarthur7955]

This bike!! Which tail tidy did you use here? It’s difficult to find these for the xt

[@fabianklein4432]

Yeah same here, they are crazy expensive. I bought a really cheap universal plate holder with a light for 10euros and then did the rest myself. Couple hours of work but turned out great

[@aggelosgrodt2024]

Damn you got hands.

[@KrzychuRider]

Nice ;)

[@darkskull5790]

Nice

[@doctor_stunt]

Schön gemacht....

[@Meifesto]

It sounds nice man. Akra sounds more angry then my Leovince ;)

[@fabianklein4432]

yeah they sound brutal especially when it shoots flames and makes a crazy loud pop. but i bet leovince sound really similar. Ride safe!

[@Meifesto]

@@fabianklein4432 Might have to give it a try without dbkillers ;) Thanks, ride safe

[@fabianklein4432]

@@Meifesto oh yeah, it will sound crazy without them ;)

[@pixelsonia]

amazing ;)

[@fabianklein4432]

Thank you!

[@kiezyairsoft4961]

did u used your clutch?

[@dixonmoto]

Hej Fabian, where did you get those graphics?

[@reyadamperkins7385]

Wow very loud, nice video. How you make this video with such sound without the sound of the winds at such speed, we heard only the exhaust... 👍

[@fabianklein4432]

Thank you! I used my phone to record audio inside my backpack

[@reyadamperkins7385]

@@fabianklein4432 😊 thank you for the tip man, watching from mauritius.

[@majormassenspektrometer]

Thats a big pipe. 😄😄🤘🤘

[@eduardoramos5916]

😲❤️😻👏

[@CorydorasEmpire]

Hey Fabian! :) can you please help me a bit? Would you please tell me what kind of clutch cable did you use with the new handlebar? I've changed mine too and the factory clutch cable is too short so I need to get a longer one.

[@fabianklein4432]

Hi, everything else is original. The clutch cable from the factory is definitely long enough, try to take it out of the bike and route it somewhere else, it is definitely long even if you change the handlebars

[@CorydorasEmpire]

@@fabianklein4432 thanks Fabian for the quick answer! We will give it a go by your instructions.

[@MrClyde999]

Man you drive great. So nice to watch 💪🏻😁 how many years are you driving? And what model of tires do you have?

[@fabianklein4432]

Hi, at the time i was riding 3 years😅and the tires i was using are mitas sportforce+, really good grip and price but last about 3k kms

[@MrClyde999]

Thank you. Good luck with riding this beast and stay safe brother

[@Viewithfaizan]

We won’t be able to have such beautiful bikes in india for 1000 hrs 😢

[@simon_cb125r5]

I can't wait to get one too, can I ask where did you buy those graphic?

[@fabianklein4432]

Haha they are awesome bikes. From an italian company Switchy graphics

[@simon_cb125r5]

@@fabianklein4432 Thanks for the answer bro ❤️ Definetly going to buy it 😎

[@Fordahord1]

where did you buy your throttle? quick throttle??

[@fabianklein4432]

Thats original

[@arthurhathazi5949]

from which manufacturer do you have the tires and which model more precisely?

[@fabianklein4432]

Mitas sportforce+

[@Fordahord1]

do you have ur dash pushed all the way forward instead of angled down towards you?

[@fabianklein4432]

Yeah, because my keys dont really fit if its angled towards me

[@Fordahord1]

@@fabianklein4432 ok I’ll keep mine forward as you have it like this and gave me a good reason, wanted to have it the way it comes out of factory and I think that is angled towards you but not too sure.

[@fabianklein4432]

@@Fordahord1 yeah i also think it looks better angled forward because it matches the line of the white plastic. And speed is also visible perfectly

[@Fordahord1]

@@fabianklein4432 ye you can’t see the ugly screws either, and I have the brake line blocking the view of the dash a lil bit 🥲

[@kiezyairsoft4961]

you switch gear without using the glutch? is this good for the engine or it doesnt any damage?

[@fabianklein4432]

If you do it well then there is no risk. Ive been shifting like this for 20k+kms and still works perfectly

[@kiezyairsoft4961]

thats nice! did you also switched rear on the beginning when your wheel was up for a sec? i got my xt660x for a week now. awsome bike for sure

[@kiezyairsoft4961]

you got some mods also or all standard?

[@fabianklein4432]

@@kiezyairsoft4961 dont really understand your question but if youre asking if i switched gears then yes, i switched from 1st to 2nd in wheelie

[@fabianklein4432]

@@kiezyairsoft4961 k&n filter and akrapovic exhaust, otherwise standart

[@tarzan692]

Brother that sticker set? Where can i buy it it’s insane 🔥

[@marcusbengtsson501]

You ever found out where? im also looking haha.

[@sennewauters7331]

Hiw far can you lean an xt660x? Like really far or just a little before it slips?

[@fabianklein4432]

If you have good tires you can scrape footpegs easy without slipping. I even scraped the frame with mitas sportforce+

[@xrv_world_explorer2k207]

Hello you are stock from ecu??? What number have the C1?

[@fabianklein4432]

Yes ecu is stock and i dont know co settings but i think around 20

[@gallejugon3350]

Great bike , i have a Husa 570 .

[@fabianklein4432]

Thank you!

[@martixeu388]

Hi, you have a quickshifter on that bike?

[@fabianklein4432]

Hi, no i dont

[@DanielMoreno-ft2qf]

Hola amigo , q costo tiene para dejar el sonido tal cual?

[@fabianklein4432]

I dont speak spanish and goovle translate doesnt work that well :(

[@ottodix_]

What year is the model?

[@Turbogio216]

What do you kind of tyre you wear?

[@fabianklein4432]

Mitas sportforce+

[@queenslander954]

Yea mate, the Rims look horn

[@coco-te1op]

Does it cut out or stall at low revs?

[@fabianklein4432]

No, runs perfectly

[@armandov2424]

Love the thumper, kinda miss my old LC4. Have you ever compared the XTX to the KTM 640 in real life?

[@fabianklein4432]

Thank you! No i dont know anyone with a 640 but i recently drag raced a husqvarna 701 (same engine as 690) and the XT is much faster up until 70kph, then the husky takes off

[@Fordahord1]

@@fabianklein4432 I can’t see how an xt would beat a husqy 701 upto 70kmph. they’re lighter, have more torque and more horsepower

[@fabianklein4432]

@@Fordahord1 because XT has much more torque on low RPMs. The husky has much more torque and power in higher rpms but the initial kick of the XT just beats it. I wish i had it on video but when i meet with him up again i will record it. It just comes down to the power curve which is really different compared to husky

[@csgomagic]

i have ....on a roll 640 got the win easily .from a complete stop it is pretty close and higly depended on the riders

[@vallsilva9742]

Ta linda

[@THETURZO]

How much hp? 48cv?

[@fabianklein4432]

Around 46hp

[@michalsoucek1808]

What country is it

[@fabianklein4432]

Česko

[@kinq8132]

Hey, do you have a powercommander?

[@fabianklein4432]

Nope it is stock fueling. Just k&n filter stage one without snorkel and akra pipes without db killers

[@kinq8132]

@@fabianklein4432 And what transmission are you riding on? Bc it was wheeling without the clutch in the first gear pretty easy

[@fabianklein4432]

@@kinq8132 well transmission is original and final drive is also stock gearing. Not sure how many teeth exactly but it is stock. First gear not even full gas and it wheelies super easy and if i snap the throttle in second gear with a little body movement i can wheelie also easily. It is better to use the clutch but it is possible and easy to wheelie second gear with only gas

[@kinq8132]

@@fabianklein4432 yeah, i can pull wheelies in 2nd gear with clutch, but no chance without clutch. I‘ve got the original transmission too, but with an leovince exhaust, but I doubt that it makes that big of a difference

[@fabianklein4432]

@@kinq8132 maybe i will make a video showing that is is possible on my xt. Was also surprised that it was so easy but 3rd gear is really hard with clutch

[@untruehunter1828]

What is your height?

[@fabianklein4432]

180cm

[@filipgreksa5899]

48 hp or 60 hp?

[@fabianklein4432]

46hp

[@interphone7963]

35.000

[@samihachami5330]

... Le film Ac... Système aluminium pour... Alors quoi de neuf... Grec ...🎉... Merci Anise El Baraka... Derb El Khir... Zenka... Derb Omar... Aji aji... Der... Lik chi... Droj...hamra... Le maire caïd de casablanca. 1933... Ben hima

[@mahleherzog5481]

How much HP?

[@novakmaksimovic222]

I think it goes in A2 category

[@coco-te1op]

Just the pipes?

[@fabianklein4432]

What do you mean?

[@coco-te1op]

@@fabianklein4432 Any other performance mods? Or is it just the exhaust pipes?

[@fabianklein4432]

@@coco-te1op k&n air filter, removed snorkel and the exhaust

[@coco-te1op]

@@fabianklein4432 have you adjusted any of the mixture settings? It sure sounds good . . .

[@fabianklein4432]

@@coco-te1op im not sure about the CO settings but that doesnt make a difference. It still pops like crazy and shoots flames. The sound with akras is crazy good. Thank you bro!

[@sebastian87113]

whellie?

[@fabianklein4432]

Stopiee?

[@melpim69]

😂fullgas

[@ivanoxx]

why Did I sell this bike

[@fabianklein4432]

Not looking forward to the day i sell mine :(

[@karl-arnal]

Sore wrists?😅

[@ibrahimdeniz7308]

I have to admit this looks amazing and fun, but how can people ride that fast on slim roads like that? I never go faster than 80kmh, all it takes is an idiot who cant stay in his own lane. Maybe its because i had a crash before, but wherever i feel a unnecessary risk i chicken out and start riding like youre supposed to ride, which is the right thing in my opinion...

[@fabianklein4432]

Hey man you can ride however you want. Thats the best thing about motorcycles. I ride fast because i love it, yes there is danger but you cant worry about everything that could happen to you. You just would live properly if you worry about every single thing. Ride safe many more kms!

[@brunosousa1977]

2 leovince sbk would be much noisier

[@fabianklein4432]

Never heard XT with leo vince so i cant compare, but the akras are plenty loud

[@brunosousa1977]

@@fabianklein4432 ak are also great

[@InesRodas-or6oz]

I8