Xtool D7 review

Xtool D7 review problems I've found while scanning vehicles.

[@wildsnake6894]

Sounds like a good honest review thanks for the video

[@404notfound.....]

Curious, because like question what's gonna be If you go over to live data it should show you what cylinder is misfiring but if it doesn't then you've definitely uncovered failures. My autel is fully updated. Great video brother!! 👍🏼

[@fernandoleopoldomelladocor1392]

Tengo varios equipos de diagnóstico,entre ellos el xtool d8 y te podría decir que es muy buen equipo, ningún scanner hace todo ,y entre varias marcas debes complementar.

[@SW-Video]

Take a look at the Otofix D1 Lite in this price range. The D7 does do some things pretty well and not others. I bet the same could be said for many budget scanners.

[@redbeardreviews1236]

reading o.9885 or what ever is telling you its not working on the xtool plus that car is out side of its scan data.

[@meltdownblitz]

I have an xtool d8bt. I also tried to do oil maintenance reset on 3 cars already of my fleet and none of them were successfully able to reset something simple as a maintenance light. I was however able to program keys on a 2013 chrysler 200. Seems like it's good for programming keys. Can anyone recommend a good quality scanner similar to this one that actually has some functions it can do like oil maintenance reset ?

[@DS3820]

Snap on is by far the best but it cost a fortune.

[@Digiman1946]

If you go into the obd2 area and access mode 6 you will find the misfire.

[@himeedajew]

Where can you see battery volts?

[@WalterBarger-io9ck]

Xtool D7 scans . Scans from 2006 on up it will scan older models also if it's American made because it's an older vehicle you might not get all the updates you're looking to do for it because it is a older vehicle there is a TEC- number you can call and they will answer all of your questions what you need to know you tell them what you were trying to do with the xtool D7 what year make and model and what you're trying to do with the scanner they will tell what the scanner can do for that year make and model. Call the number they Supply with the scanner and tell them what you're trying to do for the year make and model they will have a definite answer for you what it can do and what he can't do for that year

[@DS3820]

Thanks for your comment, as a mechanic for 23 years working on various makes and models, it's not practical to call the manufacturer of a scan tool prior to scanning it. If the vehicle is an option listed on the scan tool, one should expect it to do the task of retrieving a code, i understand bidirectional test could be limited, but code retervial should not be... I have owned many scanners in my years in the field. Every scanner has its advantages and disadvantages. I'm still using the xtool today. Overall I like it. I just don't 100% trust it.

[@randalllyons8467]

Just bought one and it won’t communicate with my two vehicles. One a 2007 f150 and a 2012 Rav 4

[@DS3820]

Toyota is a little hard to scan, but I have learned how to do it, there is just too much information required to scan those cars.

[@billmonroe8826]

Sounds like Scanner Danner was right with his review. XTOOL is a waste of money.

[@WalterBarger-io9ck]

I don't think Danner scanner is absolutely right about xtool D7 you need to do a little research and then you'll see different opinion

[@georgesontag2192]

Looks like you get what you pay for in scanners. The d7 is only $350.