xTool F1 (The Rocket) 144Km/h VS Laserpecker 4

[@DanieleTartaglia]

follow me on telegram page for Special coupons: 👉 TELEGRAM: bit.ly/2V9CWVY

[@alamoarno8475]

Complimenti Daniele, sempre all'avanguardia nella tecnologia!!! ...

[@DavZell]

I like the Xtool for everything but work area. It's a bit louder, too, but not enough to make me care.

[@andrewfelsinger8332]

"which one is my favorite? you need to decide in the comments" (proceeds to use the xtool to finish the video). i love it and i al,so prefer the xtool. seems to always get super crisp lines no matter how dumb my settings are

[@Birch-and-Maine]

I love the XTool!

[@JBrierley02]

I have both the F1 and the LP2. While overall I prefer the F1, one big reason being the desktop air purifier, one thing I hate about it is that there is no bluetooth support. If you want to use the mobile app, you have to first connect a computer to it and give it WiFi settings. So if you want to take it mobile - you better take your laptop with it or you’re out of luck.

[@josephKEOarthur]

yeah i dont like the LP2 knowing with the ipad or iphone it works perfect. but with a common laptop or macbook pro - you HAVE TO BUY AN ADDITIONAL LaserPecker Dongle. - Xtool F1 you dont need that.

[@linolino]

Montaggio strepitoso ! Sei un grande professionista Daniele !!!!

[@manoelalves7204]

Daniele, thanks for the guidance.

[@Alison99998]

I love the LaserPecker 4 for its speed and the engraving effect, we should test more to see it in an objective way.

[@LorenaOlvera11]

Wich one is the best for jewelry?

[@BramDispa]

Need to buy a laser engraver. I think you made me choose the xTool.

[@giggitygiggity8391]

Excellent video. Very thorough and covered everything I'd want to know. I have the LP2, LP3 and the LP4 so I've seen their progression and improvements over each generation. I do prefer the overall look of the Xtool machine and the top speed is impressive but once you've been laser marking for a while you realise the top speed is almost irrelevant as you so rarely use it. For me it's about quality of marking, software ease of use and portability. Both machines have their good and bad points and I'd be happy to own either of them. I'm just happy that with more companies bringing out these type of machines there'll be more choice and prices should come down. Subbed. 👍🏻🤙🏻

[@jakeMTSU]

only have F1, love it, use in office indoors all the time no issues

[@armandoperri9487]

Please, somebody can explain me if on the f1 is possible to use the slide extension and rotary system at the same time?????? Thankss

[@benjaminpastrana9662]

F1 & accessories 🏆

[@eugeniodelbuono9483]

Daniele come posso contattarti per chiederti un consiglio?

[@TonioPgolf]

Ciao danielee puoi dirmi i parametri che hai utilizzato per incidere la rosa sull acciaio con xTool F1? Io ho fatto varie prove ma non sono arrivato a quel risultato🙏🏻🙏🏻

[@odontomeccanicaapplicata751]

Ciao, bella presentazione. Volevo sapere se ci sono laser per incisione più abbordabili a livello di prezzo, non mi interessa incidere i metalli. Dovrei utilizzare il laser per il legno e la plastica. Vedo tante pubblicità nei social, anche a prezzi bassissimi, ma non mi fido molto. Puoi darmi qualche consiglio a riguardo? Grazie

[@DanieleTartaglia]

Vieni nella mia pagina telegram, trovi il link in descrizione e formula questa domanda, ti darò una risposta e un consiglio sul' acquisto.

[@Creeds-Creations]

lol, we all know the Xtool F1 won this challenge.

[@kreatifcerdas999]

Alat yg istimewa

[@FernandoLopez-yu8vb]

Have both xtool F1 and laserpecker 4, currently prefer laserpecker for its less noise and larger working areas🥰

[@torturer7471]

Please, tell me... Can you engrave in gold? Can you engraved with the Xtool on a mailbox or on the wall?? I know with the Laserpeck you can do It.... Thanks for the vídeo !!!😊

[@boxerbiene8361]

Xtool F1❤❤

[@TfRsmokinmasta]

Xtool for me

[@s.mack1300]

Can I upload my own designs for engraving on the xtool?

[@petersketch1990]

Can you make jetpack with helium ?

[@GeorgeLeyton]

la Xtool F1 se ve más completa en software y acabado profesional

[@boxerbiene8361]

Hi Daniele was für einstellung für Metall? Xtool F1 ?😊??

[@Samaja0815]

Alo ich habe Xtool und Laserpecker, die Rotary von Xtool ist sehr wackelig und billig, auch der Stecker ist nicht Zeitgemäß, das hätte man mit USB C lösen müssen, die vom Laserpecker ist sehr hochwertig aus Aluminium und die Verkabelung vorbildlich mit USB C. Aucxh die Klemmvorrichtung ist bei Laserpecker schöner gelöst, man braucht kein Werkzeug dazu und muss nur an einem Rad drehen um Material zu Klemmen. Ansonsten Favorisiere ich trotzdem den Xtool, da die Leistung einfach besser-/Konstanter ist, als beim Laserpecker. Der Kopf vom Laserpecker ist immer ein bisschen schief und Wackelig, der Xtool immer gerade und fest. Von der Qualität sind beide sehr gut Verarbeitet, nur das Zubehör ist beim LP hochwertiger. Dafür ist die Software, was ich für mit an wichtigsten halte, von Xtool deutlich besser. Letztendlich muss aber jeder selbst Entscheiden was er Kauft, man kann mit beiden Marken tolle Ergebnisse erzielen. Liebes Xtool Team, ihr habt bisher einen guten Job gemacht, aber das Zubehör und vor allem die Stecker müssen besser werden, so ein Plastikstecker aus dem Modellbaubereich ist einfach nicht Zeitgemäß, also bitte UNBEDINGT eine bessere Rotary Entwickeln, danke. P.S. Im Video ist die Geschwindigkeit vom LP4 mit 2000mm/s angegeben, das ist nicht richtig, der LP4 hat genauso wie der F1 4000mm/s.

[@boy-boy1234]

สวัสดีคับ

[@Lollozerotre]

สวัสดีเช่นกันครับ

[@MSarabiaNREMT]

Xtool

[@JustiaFiat]

4000 mm/s are 14.4 km/h not 144.

[@GozonTheGonsarian]

UM... I think you need to double check your math. It's 14.4 Km/Hr

[@FoxMar82]

Per me vince xTool F1

[@onorator]

Fatto i soldi, eh ?? 😁

[@alessiomarcantoni2822]

Che brutto che non spiego più nulla a voce

[@xbetrader6553]

Pin me please from Indonesia ❤🎉🎉🎉

[@benjaminpastrana9662]

Daniel! I laughed aloud when you used that wood Saw to open boxes🤣🤣🤣🤣🤣🫣I am waiting for my full F1 kit after M1 failed Me. Do I need to run to The hardware and buy my Saw??😝😝😝😝hello from Puerto Rico 🇵🇷