xTool P2 Review and Projects / Acrylic Laser Crafts / xTool P2 CO2 Laser Review / Best CO2 Laser

* INFO HERE *
Makeblock sent me the xTool P2 CO2 laser to review and compare with my diode lasers. In this video, I'll share what I think about the machine, what it can do, and what I would change.
Shown In Review:
-xTool P2 55W CO2 Laser: www.xtool.com/products/xtool-...
- Inline Fan: www.xtool.com/products/xtool-...
- Splitter: strungovercreations.com/
- XCS Software (free): www.xtool.com/pages/software?...
Get the Full Review: rufflesandrainboots.com/xtool...
Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain
In This Tutorial:
0:00 - Introduction
0:39 - Machine Set Up
1:45 - Venting Set Up
2:40 - Testing
3:50 - Laser Projects to Make and Sell
8:49 - XCS Software
12:50 - What I Would Change
Let's Stay in Touch:
Facebook Group: / diygnomesandcrafts
Pinterest: / _created
Follow on Facebook: / rufflesandrainboots
Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646
#xtoolp2 #xtool #co2laser
As an Amazon Associate, I could earn from qualifying purchases.

[@SarahNenniDaher]

Helpful Links: -xTool P2 55W CO2 Laser: www.xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=FOa8dfQBE0X30& - Inline Fan: www.xtool.com/products/xtool-inline-duct-fan?_pos=1&_sid=0e657b758&_ss=r&ref=FOa8dfQBE0X30& - Splitter: strungovercreations.com/ - XCS Software (free): www.xtool.com/pages/software?ref=FOa8dfQBE0X30&

[@salameer6486]

Cool girl, i love the anergy . Thanks, make more xcs 2.0

[@terrydemie]

Hi Sarah, Great Job on the video. I agree that the P2 should come with replacement mirrors and lenses, (I bought mine and it was missing one of the lenses so that was another wait), just in case you have an accident. It's nice to see someone that isn't doing the unboxing and then a project or two. Thanks for the video and Have a great day.

[@SarahNenniDaher]

Thanks so much for your kind words. And UGH I'm sorry your unit was missing parts - that had to be frustrating when all you want to do is get started.

[@Omagoodnessart]

Thank you 🙏

[@cinnybuggable]

OMGOSH ❣️ I am So Happy 🎉 No I don't even know what you would use this for BUT ❣️ Now I know what You Look Like 😂 I 💖💖💖 your Gnomie Tutorials🎉🎉

[@SarahNenniDaher]

Hahaha It's nice to finally "meet" you :)

[@BirdzofaFeather]

Great video Sarah! Are you finding that the acrylic smells with the inline fan? I’ve only ever cut wood so far and even with the inline fan, my indoor studio smells like a campground! Any thoughts?

[@SarahNenniDaher]

Oh no! I never EVER smell wood at all and haven't yet smelled any cast acrylic. When I was doing the water ripple-looking acrylic, I could smell that. I do have an in-room purifier (picked up on Amazon) so I have that running. I also picked up a tip from someone here on YT to put baking soda in a dish inside my lasers when not using them. Finally, I have my fan pretty close to the window. Is yours far?

[@krjajchap05]

Hi. I am interested in the splitter but the link does not show tools. Please advise. Thank you.

[@SarahNenniDaher]

Hi there, you just need to navigate your “exhaust couplings.” Does this link work? strungovercreations.com/collections/exhaust-couplings

[@SarahNenniDaher]

Also, you can send him a message and he’ll design what you need for your hose and blast door set up, too. Just in case you aren’t sure which one you need (I wasn’t).

[@CoffeeJake]

Do you find that the reference test array settings are accurate? Or do you still have to tweak those?? Thanks!!

[@SarahNenniDaher]

I personally run my own material test arrays. I published a video yesterday on how to do a “smart” material test array using the settings provided by xTool because some of my readers were so nervous trying new materials. I can’t seem to link it here in the comments but it’s the latest video

[@michaelerman8580]

Hi, Sarah, how that engraving marked into black on pink watchband? I’m just curious🤔😊

[@SarahNenniDaher]

I had nothing to do with that magic. LOL It is the black engrave watch band set from xTool. You don't have to use them with an xTool (it'll work with any laser). I thought they were such a cool concept I added them to an order and they were so cool. I got these but they also have white engrave and a rainbow engrave option. www.xtool.com/products/laserable-black-silicone-watch-bands?_pos=5&_sid=4be2889e8&_ss=r&ref=FOa8dfQBE0X30&

[@michaelerman8580]

@@SarahNenniDaher Wow , That’s interesting! I used to have Beamo flux but it can’t mark the way XTool does.

[@jennierollins8789]

☮️🌍🌲