This video and a couple others have saved me countless hours and thousands of dollars. There are tons of us using these tutorials and we appreciate your making this video!
@niban5 жыл бұрын
Another great detailed video. I think, I'll be able to do mine, when it's time. Thank you so much.. I can't wait to see your Evo rolling again.
@xtra_slo15965 жыл бұрын
niban thanks man 🤙🏼
@evilevox66035 жыл бұрын
You are soooo helpful, thank you! Im just a wee 19 year old with a evo x. I cant wait to get into modding my X.
@xtra_slo15965 жыл бұрын
Josh Curtis glad these are coming out useful! Much more to come. Welcome to the Evo Game 🤙🏼
@beldy20095 жыл бұрын
I'm huge fan of this guy great vid Buddy.
@xtra_slo15965 жыл бұрын
beldy2009 thank you 🙏🏼
@kngjeremythewckd6024 жыл бұрын
Just found your channel bro... watched like 5 vids all the way through so far, very informative. Hopefully purchasing my first Evo in the near future and you've given me some ideas. Look forward to watching more, keep it up
@xtra_slo15964 жыл бұрын
TheNICEScrooge 🙌🏼YES🙌🏼 Thanks for watching and good luck on the find! Lots more videos coming out
@ogossw59915 жыл бұрын
Just earned a new sub! Learned so much from this video can’t wait till my Jeep is gone to buy an evo please keep up the good work 🙌🏻🙌🏻🙌🏻🙌🏻🙌🏻
@xtra_slo15965 жыл бұрын
OG Ossw 🙏🏼🙏🏼🙏🏼
@anthonyflores57275 жыл бұрын
OG Ossw you won’t regret an evo man just got mine a year ago best decision I’ve made
@ronnyramirez67613 жыл бұрын
Replacing mine next week! Thank you for the video. I always come to your videos first.
@valiantone3955 жыл бұрын
Nice chickens that was a cool shot. ; ))
@xtra_slo15965 жыл бұрын
Valiant One ahh yea 🤘🏼
@DiamondStarWerks3 жыл бұрын
Just watched and Just want to ad an FYI, the torque spec on the clutch fork rod bolt is not 17 inch pounds. It is, according to the factory manual, 88 inch lbs +_17in/lb. or 10 nm +_ 2nm YMMS: 2012 Mitsubishi Lancer Evolution GSR Jul 1, 2021 Engine: 2.0L Eng License: VIN: Odometer: TORQUE SPECIFICATIONS TORQUE SPECIFICATIONS Item Specification Clip bracket mounting bolt 24 ± 4 N.m (17 ± 2 ft-lb) Clutch fluid line bracket mounting bolt 24 ± 4 N.m (17 ± 2 ft-lb) Release fork shaft mounting bolt 10 ± 2 N.m (88 ± 17 in-lb) Clutch cover mounting bolt 27 ± 1 N.m (20 ± 1 ft-lb) Union bolt 22 ± 2 N.m (16 ± 1 ft-lb) Air bleeder 11 ± 1 N.m (97 ± 8 in-lb)
@hellyeaseabass97154 жыл бұрын
One thing I never see anyone talk about when they’re doing the clutch videos is the restrictor pill in the slave cylinder. My clutch was blown at just 340whp because of this restricted pill. You can’t launch the car to its full potential with it still in the slave cylinder. I put a exedy twin disc in and removed the restrictor pill, now it burns all 4 tires on a launch. Maybe u can include this in one of your videos
@hellyeaseabass97154 жыл бұрын
I gotta say I like your channel and your very in depth with all your videos and I respect that. That’s why I want your feedback on what you think about this. 🤔👍💪
@xtra_slo15964 жыл бұрын
Eric Blanchard I will put it on the list of videos to make. 👍🏼 I’ve heard about it for a long time but Currently I’m almost all roll races so I haven’t worried about it. The 4-5 launches I have done came out good so be interested in feeling the difference
@az_3kgt714 Жыл бұрын
Whelp im doing exactly this because my tob just pulled out of the Pp. So no use taking it apart without all the upgrades
@6-66-k7z5 жыл бұрын
Great explanation!
@xtra_slo15965 жыл бұрын
John Lúgaro Thanks 🙏🏼
@icemanvf1435 жыл бұрын
BEAUTIFUL VID DUDE! Of course you make this 2 months AFTER I did my 1st clutch job on my Evo X! Lol no worries I had a very trust worthy tuner shop to do it. Even though I trust them to the max I still felt so nervous because even for pros it so labor intensive! All did workout well. That break in period sucked! But after words it felt like my car gained 500awhp just from the clutch lol. I do have 1 question... the Monolock collar that I also got from ACT... It had to be swapped during the install. I'm not sure but something was wrong and it was swapped for a different monolock collar. I still have the original collar that was sent. It doesnt looked messed up at all. Any thoughts as to what was wrong?
@xtra_slo15965 жыл бұрын
Patrick Joseph Thank you and sorry it was earlier 🤣 my only guess could be they sent you a Monolock color for the wrong size pressure plate. An oem one and a. After market one are different
@icemanvf1435 жыл бұрын
@@xtra_slo1596 Oh wait so there are different size locks for the plates? I didnt know that. It was ACT complete clutch kit that I bought. The collar was actually already on the plate. But so far so good.
@cssfreek4 жыл бұрын
Xtra_Slo what clutch do you recommend? I have plan of making 500-600 wheel and im on the fence with an ACT clutch kit or the exedy twin disc. I want reliability and not a huge nightmare to drive. Thanks and keep up posting videos i learn lots from them.
@borisbarrera66604 жыл бұрын
You got yourself a new sub my good sir
@xtra_slo15964 жыл бұрын
Boris Barrera Awesome 👏🏼 Thajs got the support Boris!
@andrewlimson51043 жыл бұрын
Great step by step video! Thanks for your time 👊🏽
@Isotope12134 жыл бұрын
Clutch work @ home, Kudos to you
@xtra_slo15964 жыл бұрын
sestoelemento 80 want it done right gotta do it yourself lmao #donttrustshops
@wadechit16283 жыл бұрын
0:45 me presenting in class
@MGOD92 Жыл бұрын
Installed a Act clutch along with the mono lock and the car won’t go into gear and adjusted the pedal and bleed it a lot and when trying to go in reverse it grinds. Any ideas
@Skyler90m5 жыл бұрын
😎
@Erkkremlinklum4 жыл бұрын
Life saver with these videos man! But I was gonna ask, I noticed you didn’t use loctite. Does it not call for it? Only asking cause other videos I’ve seen people did use it
@xtra_slo15964 жыл бұрын
Eric 👍🏼 I bought brand new bolts from Mitsubishi which have a loctite sealant on the threads right out the bag. If reusing then definitely apply some.
@Morrison8893 жыл бұрын
Awesome video, im looking at this job coming up shortly, haha this made it seem slightly less shitty.
@g0hl3 жыл бұрын
how long did this take you? i'm not too savvy but nearest Mitsu quoted me 2k and a day and a half of work...
@Llando3 жыл бұрын
hi, how long does a clutch change takes approx from start to finish when you know how to do it?
@hehcolton4673 жыл бұрын
Music creds? What song is that playing at about the 7.50 mark, and at the very end of the video?
@david63384 жыл бұрын
Doesn't the monoloc and forkstop prevent the same issue?
@xtra_slo15964 жыл бұрын
david Yes so hyperextension is why you add the fork stop to prevent pulling on that collar and disconnecting it from the pressure plate which in my case did hyperextend and needed replacement. Now the monolock collar shouldnt ever break off if pulled on again but to prevent that stress on the collar and risk I added the fork stop. So cheap no reason not to add while the jobs getting done
@david63384 жыл бұрын
@@xtra_slo1596 Awesome thanks for the quick reply I also bought a forkstop with a monoloc as well but wasnt sure if they addressed two different issues but now I know! Thanks again!
@xtra_slo15964 жыл бұрын
david great 👍🏼 for the peace of mind that’s the move
@david63384 жыл бұрын
@@xtra_slo1596 one more question the forkstop will need to be adjusted as the clutch gets older right?
@xtra_slo15964 жыл бұрын
david yes definitely check it during the wear down and adjust to the recommended gap 👍🏼
@17marlinhmr614 жыл бұрын
what was the problem you were having that made you change your locking ring and TOB. My evo's clutch has been making a a grinding/sqeaking noise when pushing the pedal all the way down. I upgraded slave and master cylinder. Any idea what it could be?
@gason123 жыл бұрын
I have been having the same problem too, did you figure out what it was?
@rubensevox19325 жыл бұрын
Whats your wheel and tire set up?
@xtra_slo15965 жыл бұрын
RubensEvoX wheels are Ambit FF4’s 18x9.5 +15 on a 265/35
@continuumserv60764 жыл бұрын
Hey man. My clutch is showing of slipping. Someone offered me twin plate clutch, is it really necessary or any advantage?
@continuumserv60764 жыл бұрын
Showing sign of slipping*
@xtra_slo15964 жыл бұрын
Continuum Serv It depends on your power level but in most cases a twin isn’t needed and would kinda be over kill. Not to say you couldn’t use it but I’m at 583whp , 390 wtq and still on a oem clutch..
@vicm72005 жыл бұрын
I'm subbed
@xtra_slo15965 жыл бұрын
Victor Martinez Thanks for the support 🙌🏼
@vicm72004 жыл бұрын
@@xtra_slo1596 np dude also where did u get ur gauge pods from
@xtra_slo15964 жыл бұрын
Victor Martinez it’s the Ortiz gauge pods up top and custom ones I did on the bottom (under the ac controls)
@albertsalas48484 жыл бұрын
Are the flywheel bolts always recommended to replace?
@xtra_slo15964 жыл бұрын
Albert Salas Yes recommended to replace if a new flywheel is installed
@jayminer53364 жыл бұрын
Wait you're staying with stock clutch with over 500whp? Why not upgrade?
@xtra_slo15964 жыл бұрын
My stock original clutch lasted 60k~ miles and actually didn’t fade but rather the pressure plate collar failed and I needed to upgrade to the monolock collar. I had another exedy stock clutch set up I bought years back sitting in the closet and since the trans was off fixing the collar and the first held 600hp for so long without slipping I decided might as well swap it, make a video and get some use out of it. I’ll be into a big boy triple disc once I finish up the bottom end for high boost. Btw this stock exedy once again holding the 600hp all day strong for all the upgraded “stage 2” guys lol. Multiple races and daily driving 🤙🏼
@evoguy3332 жыл бұрын
@@xtra_slo1596 holy cow
@YashPatel-jj2fy3 жыл бұрын
Trans removal video please
@xtra_slo15963 жыл бұрын
kzbin.info/www/bejne/imqbo6FvnbiWi7s
@felixdcatz9384 Жыл бұрын
i have same clutch that was installed on my evo and same fly wheel, but why my car smelling like rubber inside the car? then my gearing in my car gets stiff can you pls help me? thank you @Xtra_Slo