XYZprinting 3D Scanner (Intel RealSense F200) unboxing & Review

Hi everyone! In this review, I will tell you about the XYZPrinting 3D Hand Scanner 2.0 - one of the most cost-effective 3D scanners in the world.
xyz-3d.scanner: amzn.to/38slgJf
Here you can see my review to an other 3d scanner: • 3d Scanner Shining Ein...
If you are interested to 3d printing see this video:
• Anycubic mega S unboxi...
you can also finde in my channel many 3d printing projects: Solar pump, cell fone holder and many other things.
please dont forget to support my channel

[@lisuntecproject8972]

Thank you for reviewing this 3d scanner. It is possible to print the scanner model ?

[@gouza3dworld498]

Please check my last video

[@ion_q]

No. That's not exactly how 3D modelling / printing works. you scan the object and then export from the scanner software into the 3D modelling software like Ondsel or Fusion 360 or Solidworks. You then export from the 3D modeling software into the slicer software so that the object can be translated into language understood by your 3D printer. "Slicer" because it prints in sliced layers, filament extruded in thin slices, layer after layer into the 3D object you want! I hope this makes sense.

[@b1na276]

can you please test it with head scanning? how detailed is it, can it scan details like skin pores?

[@gouza3dworld498]

Skin pores are very difficult to scan even with more expensive scanner. Scanning edges and schapes of a head will be work but you muss treat your scan with powerfull tools.

[@CLEVERDUQUE]

Good day. I have had the scanner for 4 years. My computer crashed and I lost the SD card. Could you share the content of the SD card with me so I can use it? Thank you?

[@franlabs3d557]

Hi! It is possible to scan body parts with this scanner?

[@gouza3dworld498]

Hi. Yes it is possible but i do not tested it.

[@franlabs3d557]

@@gouza3dworld498 Thank you!

[@gouza3dworld498]

Here you can see the unboxing and testing of my new 3d scanner: kzbin.info/www/bejne/e4uTfKFnjpdnmqM

[@joudbenchama9482]

Video plus different que les autre avec l explication...bien fait

[@gouza3dworld498]

please support by subscribing

[@elsunshine9976]

Hey I want to get a 3d scanner to make parts for cars do you think this is the right scanner for the job?

[@gouza3dworld498]

If you have excellent reverse engineering skills maybe you can use this scanner to make your parts

[@elsunshine9976]

@@gouza3dworld498 Im asking cause Ive seen a couple of 3d scanners before and man they are expensive but this one is very affordable does it really work for something mechanical

[@gouza3dworld498]

@@elsunshine9976 for mechanical parts i suggest to use something more accurrate. See here: kzbin.info/www/bejne/e4uTfKFnjpdnmqM

[@masobohg]

Very bad quality, which means very bad scanner

[@gouza3dworld498]

its depend on what you want to scan. And you muss post mortem your scan to achieve a acceptable quality.

[@masobohg]

@@gouza3dworld498 creality scanner is better