Expansion done! The FT works perfectly on all possible frequencies, as well as its ATU. Thank you.
@gtretroworld12 күн бұрын
Great! Excellent thanks for letting me know. 👍
@MzkJnky8017 күн бұрын
crazy no one commented on that awesome BTTF tattoo!
@gtretroworld17 күн бұрын
Thanks, there’s more further up my arm including the Icon Ghostbusters logo. 😁
@thestonerguy52763 ай бұрын
That seems a lot easier to do than the Ft-891 or IC-705. Thanks for the video!
@gtretroworld3 ай бұрын
Thanks, I have yet to have fiddle with a FT891 and IC705 but both are radios i fancy trying one day.
@boydtravis29612 күн бұрын
GREAT GREAT VIDEO!!! THANKS from N4TUX Boyd Travis Kingsport TN. USA
@gtretroworld12 күн бұрын
No problem at all, thanks for visiting the channel, M3VWN
@m7frs2723 ай бұрын
Fantastic work Neil, great video 👍
@gtretroworld3 ай бұрын
Thanks Ben, Hopefully it will be of use to someone over the next few years.
@philiprhodes55373 ай бұрын
Loving that yaesu Neil thats a nice bit of kit for sure and tempting me to buy one now.. Obviously I’d not want to stick a hot iron inside it though I’d leave that to you as you seem more competent than me at that sort of thing.. Fab channel mate hope to maybe catch up with you sometime soon and purchase another moonraker off you for my collection..
@gtretroworld3 ай бұрын
Thanks Phil, Yeah It seems to be a very popular radio especially while Yaesu are offering seemingly endless cash back offers. I am tempted to buy one myself in the near future to have a proper play and run it against the DX10.
@m0ogy3 ай бұрын
Thanks for the video Neil 🙂
@gtretroworld3 ай бұрын
Thanks Dave, hope you’re well.
@giovafra61Ай бұрын
Easy and clear explanation. Well done, and Thank you! Giovanni I0KQB
@gtretroworldАй бұрын
Thanks, Glad it was helpful!
@MartinEvans-qw6kr3 ай бұрын
Hello mate nice to watch your videos spoke to you in m&s today I was on till
@gtretroworld3 ай бұрын
Thanks and it was good to meet you today. I will hopefully pop a few videos up in the future that cover other Retro goodies as like i said it has gone a little off track.
@stewheelie78743 күн бұрын
I cannot see why Yaesu etc should not be allowed to offer 27MHz TX on their radios within the country's CB Radio Rules. In Australia, 4 Watts AM and 12 Watts SSB PEP. If the FT 710 could do that without this mod, I would be happy. I have an AX144 with no mods or extra power and I can talk across Australia on SSB easily at the moment.
@gtretroworld3 күн бұрын
@@stewheelie7874 I guess they could but i doubt anyone would pay Yaesu money for a 27mhz only radio. A lot are using these for 11m but most probably not within their countries rules. Yaesu don’t seem to care, same as the retailers who offer the modifications. I do see your point though.
@jerryKB2GCG2 ай бұрын
wish they used physical jumpers, my hands aren’t steady enough to do that bit of soldering
@gtretroworld2 ай бұрын
Honestly if you take your time with a small iron it will be over and done in seconds, if you were local i would’ve gladly done it for you.
@indridcold8433Ай бұрын
I used a solder rework station and very fine solder. I only used the hot air aspect of the solder rework station. It is more forgiving than a big sloppy soldering iron.
@gtretroworldАй бұрын
@@indridcold8433 I think most that are watching this are not very confident with working on expensive equipment. I normally don’t recommend anyone using hot air without experience or a quality tool as i have seen a lot of damage to surrounding components.
@giovafra6129 күн бұрын
I have a question: aftet the modification, does the autotuner work on all the frequencies, included rhe new ones?
@gtretroworld29 күн бұрын
@@giovafra61 Yes it works on all frequencies perfectly well to the usual Yaesu nominal 3:1 SWR range.
@giovafra6129 күн бұрын
@@gtretroworld Very well. So, I'll do that modification. Thank you very much! Giovanni I0KQB
@gtretroworld29 күн бұрын
@@giovafra61 No Problem, Just take your time. 73 M3VWN
@user-uy7ln6ir2y6 күн бұрын
l'autotuner fonctionne après la modification test ok
@indridcold8433Ай бұрын
I have done it several times for people that pay me to do it. My question is, what do the other solder pads do?
@gtretroworldАй бұрын
Good question, I presume those will be for other regions, Japan etc. I will send Yaesu a mail and ask the question and report back.
@indridcold8433Ай бұрын
@@gtretroworld Thank you. Your efforts are well appreciated.
@gtretroworldАй бұрын
@@indridcold8433 Thanks 👍
@MountainMan7.62x393 ай бұрын
Great video, thanks! I have an FT991a that I bought from GigaParts with a MARS mod. The mod only addresses the HF portion of the radio and not the VHF/UHF. Do you know if it's possible to modify that as well? Thanks again!
@gtretroworld3 ай бұрын
Thanks, Yes the FT991 is MARS/HF only. You can use service mode to enable VHF/UHF but it isn’t a permanent or ideal workaround. I will dig a little deeper and if i find anything i will let you know,
@KE8ODY-WV-Ares-Ham-Dad-3O4Ай бұрын
That opens up cb radio ?
@gtretroworldАй бұрын
@@KE8ODY-WV-Ares-Ham-Dad-3O4 Yes, basically all HF.
@KE8ODY-WV-Ares-Ham-Dad-3O4Ай бұрын
@@gtretroworld man that’s scary I used my ftdx10 but my 710 is brand new back up I wanna do it lol
@gtretroworldАй бұрын
@@KE8ODY-WV-Ares-Ham-Dad-3O4 All i can say as long as you take your time I’m sure you will be fine or alternatively pop it to a local tech.
@KE8ODY-WV-Ares-Ham-Dad-3O4Ай бұрын
@@gtretroworld I just did the mod on my Yaesu ft2900r no issues but
@Industrialsoundfanatic2 ай бұрын
Tried this mod, but holding down the buttons on start up won't activate the mod for me.
@gtretroworld2 ай бұрын
It maybe worth going back and checking your solder bridge as this has never failed with the few i have done. You can also reset the radio in the menu if it is easier with All Reset, hope this helps.
@Industrialsoundfanatic2 ай бұрын
@@gtretroworld I don't have the latest firmware, maybe this could be the problem.
@gtretroworld2 ай бұрын
@@Industrialsoundfanatic I am not really sure as this and the others were checked and updated if needed before hand. I will say it is always worthwhile keeping up with the latest firmware updates.
@Industrialsoundfanatic2 ай бұрын
@@gtretroworld Thanks buddy, great video and good advice.
@gtretroworld2 ай бұрын
@@Industrialsoundfanatic No problem and thanks for visiting the channel.
@KH077342 ай бұрын
Yet another mod where a blob of solder is used…. There is supposed to be a zero ohm surface mount resistor at 1/10 watt installed to make the connection.
@gtretroworld2 ай бұрын
There is absolutely no difference between this and a Zero ohm resistor, maybe the resistor would look prettier but that’s it. Even the Yaesu paperwork quotes use a solder short and probably every tech and shop is doing the same. Thanks for visiting the channel.
@KH077342 ай бұрын
@@gtretroworld I beg to differ, The whole point of the pads is to employ a break in the circuit as protection with a 0 ohm resistor at a very low current rating to pop or break when a back feed or over current is applied and to protect the downstream components. If it were as easy as a blob of solder it would have a jumper point so it can be jumped. I guess we agree to disagree. although my 2 electronics degrees will steer me in the right direction.
@gtretroworld2 ай бұрын
@@KH07734 You will find most of the time the only reason 0 ohm resistors are used is it is loads easier for a machine to fit them over a link. The chance of even a low current resistor popping across this area and acting as protection would probably never work in my opinion and allow as much current through it anyway, well maybe not as much but you see my point. Anyway I always welcome any comments but maybe you should contact Yaesu as like i say this is exactly to there specific instructions and has been for decades across multiple radios. Thanks again.
@andycarless90693 ай бұрын
Nice clean job 👍👍
@gtretroworld3 ай бұрын
Thanks Andy 👍
@user-zk2yd6xm8s28 күн бұрын
Why mod for MARS if you are not a MARS member
@gtretroworld28 күн бұрын
I would honestly say most opt for the MARS mod just for 11m and WARC especially on the older radios. I think MARS modified is just a term that everyone relates to wideband TX.
@user-zk2yd6xm8s28 күн бұрын
@@gtretroworld I think it's for bragging.... I wouldn't buy a radio that was modified.