hi i have a 04 blaster the head is ported no air box lid full fmf exhaust and k&N air fliter i live at a low altitude area what size jet will u recommend me using i pre mix my gas and oil
@22raddad7 жыл бұрын
What carburetor do you have on it?
@mymobilemechanic88965 жыл бұрын
I would suggest a jet kit and it has many options
@OperatorASF6 жыл бұрын
Are you sure that head is a race head bro?
@mymobilemechanic88966 жыл бұрын
Matt Steinhilber I was under the assumption it was decked and rechambered
@OperatorASF6 жыл бұрын
My Mobile Mechanic gotcha. Only reason I asked is because stock heads have different cooling fin configurations than raxe heads (the fins on the topside) yours are an indicator of a stock top. Good possibility of a rechamber though, or it wasn't and it was just a cleaned up stock top. Easy to tell if it was though
@mymobilemechanic88965 жыл бұрын
I cant say it is a "race head" its a stock head that was cut down to increase compression. Im going to port out the exhaust this winter and see where it gets me.
@22raddad7 жыл бұрын
Get rid of that junk mikuni carburetor , and buy a 28mm keihin from J & D jetting. Also remove the air box & put a clamp on k & n with a outerwear. Trust me you will regret not doing it sooner.
@mymobilemechanic88967 жыл бұрын
Awsome man, thank you for the advice. Will the 28mm fit directly right on the stock intake?
@22raddad7 жыл бұрын
My Mobile Mechanic Yes it will.
@mymobilemechanic88965 жыл бұрын
I took your advice and love it, thank you!
@22raddad5 жыл бұрын
@@mymobilemechanic8896 Your welcome! 🤘
@kacperburzak16104 жыл бұрын
@@22raddad right bend pipe and a 34mm mikuni. Mikuni is a very good carb make
@jayppop33336 жыл бұрын
How did you mod your box basically same set up as you but I got the fmf set up 290 jet now