Yamaha Clutch Service RMAX X2 X4 Grizzly Kodiak Rhino Viking Ultramatic Primary Secondary Rebuild

[@bamgomans]

Thanks for the awesome video .

[@Ph8rus]

Excellent!! Very detailed - the best I've seen on this project.

[@coachvonyo]

Thank you!

[@1983thunderbird]

Excellent video and very thorough. Thanks for taking the time to make and post this.

[@robmadaffari6270]

Brilliant job well done. Basically a video service manual. Top marks, please continue down this road.

[@leonmaritz2598]

Excellent explanation to how to do the job....Thank you from South Africa...

[@johnlegate9294]

Thanks did mine tonight video was very helpful.

[@coachvonyo]

@@johnlegate9294 glad to hear it!

[@ecw13pi]

Very informative. Thank you. I still have a pretty good while before my service is due but I wanna be ready when the time comes. I'll most likely do the Weller kit when I do my service.

[@coachvonyo]

That's exactly what I did for my Rmax.

[@leewilliamson8460]

Great thorough explanation. Thanks

[@43dukedog]

I’ve got a 2009 Grizzly 450 with around 4000 miles never touched the belt or clutches rode many trail miles hauled a lot of firewood never smoked the belt great cvt! Still running factory battery after 15 yrs ! Yamaha rocks ! Probably should check the belt at this time

[@coachvonyo]

Oh yea, excellent belt system. The best. What I describe in the video is recommended preventive maintenance. You can get by with a lot more mileage though, especially on the ATVs.

[@kevinclark8782]

I used Tink seal on both clutches 2000 miles ago. When I took them apart the secondary looks great. The primary however, most of the grease came out and was all over the cage. I think I going to an ultramatic equivalent on the primary and tink seal on the secondary.

[@coachvonyo]

Interesting and thanks for commenting. I'll keep an eye on my Rmax as it has tinkseal. I wonder if your primary o-ring got leaky? Not sure how else that would happen.

[@brandondimmitt8467]

Hey dude what size wrench will get the secondary nut off so u can access the spring??

[@coachvonyo]

@@brandondimmitt8467 21:20 in the vid. Generally 45mm for singles and 55mm for twins.

[@LeonardoRodriguez-e1b]

Will this video be the same as doing the clutches on my rmax?

[@coachvonyo]

@@LeonardoRodriguez-e1b I have also done my Rmax so it's close enough yes. I highlight the minor differences in the vid. If you can do 1, you can do the other easily.

[@nathansmees1471]

Great video! What’s the name of that other grease that works for both? Can’t get yamalube this weekend trying to find an alternative. I have brake caliper silicon lube, thought of trying that

[@coachvonyo]

Tinkseal works for both. I know bel-ray wheel grease would work in a pinch for a short time if it was changed back out quickly. Really not sure about anything else.

[@nathansmees1471]

@@coachvonyo cool thanks for the quick reply. I’ll see what’s available

[@mc-rob4762]

@@coachvonyomarine grease works very well for all services on this clutch due to its waterproof properties

[@coachvonyo]

@@mc-rob4762 I had a negative experience with a Grizzly 700 and a great waterproof grease (Belray) and never tried it again. I suspect it was a combination of extreme heat/cooling cycles with the motion and dust contamination over time from the cooling air pumped through but the grease broke down and the sliders were making an awful noise. I had to get back in there and service it within a year. I won't claim that one experience is the holy Bible though, I just never tried it again.

[@javieryoval4722]

Amigo el embrague primario le servira a una cuatrimoto grizzly 350 el que se ve en tu video trae 4 tornillos y el de la mia trae solo 3 tornillos rn la tapa no encuentro el de ella pero son casi lo mismo

[@mc-rob4762]

Who else is here after too much dirt and water got in their clutch from excessive mudding 😂

[@coachvonyo]

Probably more than would like to admit!

[@shootermcgavin1485]

Me at the least, I fully submerged mine 🤦🏼‍♂️

[@mc-rob4762]

@@shootermcgavin1485 same, my back end was completely under water so I had to get off my quad in waist deep water and throttle it out. Thank god my exhaust tip is angled at 90 degrees otherwise I’d of been done for 😂

[@timvuagniaux]

I remember watching you do that in your garage. ⚙️🛠️🪛

[@coachvonyo]

Yes we knocked this out on your Grizzly 700 years ago.

[@Backwoods83Alberta]

Thanks for the great video.