Yamaha DGX-620 LCD Screen Replacement

#yamahakeyboards
#keyboardrepair

[@Lebe777]

We thank you again, and again for showing us how to replace this part! You saved my keyboard! And you gave us a link to order the part… That was fantastic!

[@PTranProductions]

You are very welcome! I am here to help. 😀

[@jeffbylund943]

Great repair video! One of the best I’ve seen. Clear, step by steps, shows everything with good narration. Thank you!

[@PTranProductions]

You are welcome! Thank you!

[@rhodawilson8618]

This was excellent. I watched and, in some cases, slowed it down and rewatched. I was a little nervous as I had never done this type of thing before. I found another video to teach me the basics for soldering and “voilà.” My piano is working again with a fully lit screen. Thanks so much. ❤

[@PTranProductions]

You’re welcome! Congratulations on your repair!

[@TheGazzz99]

Thanks very much for this - worked a treat!

[@PTranProductions]

You’re very welcome! 👍

[@sbcheon]

Thank you so much. Just suceeded the replacement following your video. Wouldn't have risked my clumsy hands if it wasn't for this video.

[@PTranProductions]

You’re very welcome! I am glad you found the video helpful. Cheers 🥂!

[@alexiscomplexus]

This video production is lifesaver; best step by step video guide soldering repair LCD screen, I've learned, a common flaw with DGX 620 model. I attached same wires one had become disconnected to main circuit board (which powers up keyboard), Kudos! FYI this video solves another common issue - 'why keyboard won't power on'.

[@PTranProductions]

Thank you! I am glad that you found this video help.

[@Craigdna]

Thanks as this was very helpful. Much appreciated.

[@PTranProductions]

You’re welcome!

[@pyosa11]

Thank you man! You're saved me 200$!!!!!!!!!!!!!

[@PTranProductions]

You’re welcome!

[@grossomendez]

Thanks!!!, works perfect

[@PTranProductions]

You’re welcome!

[@stewdumplings7847]

Watched this almost to the end, told the wife no problem i can do this lets order a screen. She starts looking for a replacement. I put video back on to see how the screen works after he replaced it. Then the guy says i can even adjust the contrast. Lightning bolts fly we look up how to adjust contrast and i am now a hero. Bless your heart she didnt know about the contrast knob on the back. Screen was to dim to see otherwise. Thank you.

[@PTranProductions]

You are very welcome!

[@lorettalobb]

I just clicked on the vid, seen your comment looked on the back of the keyboard, found little knob voila screen fixed! Thanks!

[@ebbek6065]

Thank you 🙏🏽

[@PTranProductions]

You’re welcome!

[@igreen4726]

Just changed mine with the help of your excellent video. I had trouble disconnecting the screen power leads from commector, they would not move and the coonector started to loosen., so I did the soldering in situ. Just had to exercise a bit more care. Anyway, much obliged . London ,UK

[@PTranProductions]

Congrats!

[@Moogman13]

Thank you for this video, my replacement screen is coming from HK - China and tracking shows arrived in US and cleared customs, so I am expecting it this week or next and your video was very informative on what to expect. Great job!!

[@PTranProductions]

You’re welcome! Good luck with replacement screen! Thanks for stopping by!

[@richardhamilton-gibbs6360]

Thanks for this video. I've been through the other ideas (put clamps on the screen connectors etc) but they only kinda worked. So I've got a new screen and I'm about to replace the old one. I liked the video a lot. The only thing I would change would be to slow down the actual soldering of the power connector. A lot of people don't have good soldering skills and some words of advice while you were soldering would be very helpful to a lot of people. Avoiding cold solder joints, not burning the pads etc. I'm delighted with the video overall. I've subscribed to your channel and if you set up a Patreon page, I'd give you a couple of bucks. Lol

[@PTranProductions]

Thanks for your comment! Your suggestion is noted.

[@richardhamilton-gibbs6360]

@@PTranProductions Ok. I've replaced the display and it works better than the original. I looked at another video for soldering tips, and that worked well. In fact, I think you did it right. If people need to brush up their soldering skills maybe you could put a video you like in your comments. But that video of yours is da bomb! :)

[@PTranProductions]

Congrats on your new replacement screen! Indeed basic soldering skill is required to do this repair. I glad that you had found some ‘how to solder...’ videos on KZbin to help you to carry out this repair. Cheers!

[@ResistTheNonsense]

Not sure if anode is always positive for electronics like this but in general it is not always positive. For anyone who might be concerned... if you reverse the polarity and you are not getting any light up for the screen then you can just switch the order of the wires in the wire in the clip in terminal at the power supply. If you cannot see anything on your screen be sure to adjust the contrast.

[@PTranProductions]

Anode always means positive. If you connect it incorrectly then you may damage the board due to reverse polarity. So be sure you connect the wires correctly Anode = positive and Cathode = negative.

[@kourooshlaghaei5709]

Thank you :-)

[@PTranProductions]

Np!

[@emirkhanbal3129]

Tnk you 💕

[@PTranProductions]

You’re welcome! 👍

[@paolocortina6656]

thanks for sharing; having the same issue! quick question: where did you get the replacement screen? having trouble locating one - i'm in Canada as well. cheers!

[@PTranProductions]

I got mine from AliExpress.com. You can also get from eBay.ca www.ebay.ca/itm/114625179566

[@paul-cy4wi]

Great video, As this has just happened to me, any links or nods regarding on purchasing the replacement screen would be a help.

[@PTranProductions]

Hi Paul, Here’s the link for eBay.ca or you may find something similar online at your location. www.ebay.ca/itm/402434806406

[@paul-cy4wi]

@@PTranProductions Cheers Pal Much appreciated

[@PTranProductions]

Np! Good luck with your screen replacement!

[@PTranProductions]

Np! Good luck with your screen replacement!

[@alexmusic19]

Good video, I have the same case... could you indicate the link to purchase the LCD?

[@PTranProductions]

Here it is: www.ebay.ca/itm/202325176074

[@Robert-Smith]

Are the replacement screens better then the originals ours did not last long

[@PTranProductions]

The replacement screen is identical the the original. The display is solid with good contrast. Time will tell if it lasts. For now, it’s working in perfect order.

[@cezariocanduccidias3581]

Very good video. I'm from Brazil. I need to buy a display for my DGX 630 that is having a problem, someone for helping me by providing addresses for the acquisition of another display. I'm gratefu.

[@PTranProductions]

You can get it on EBay here: www.ebay.ca/itm/Display-LCD-for-Yamaha-PSR-S500-PSR-S550-PSR-S650-MM6-MM8-DGX620-DGX630-DGX640-/202325176074?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0 Or here: C$ 84.36 21％ Off | New Original A+ For YAMAHA PSR S550 S650 S500 DGX520 DGX620 DGX630 DGX640 YPG625 mm6 mm8 Electronic Organ LCD Screen Display a.aliexpress.com/_mq63HaC

[@duotwinzzlivemusik557]

Great Video. I connected the display like you, but it doesn`t work. It lights, but I can`t see any symbols. What I did wrong? I`ve tried to adjust the contrast, but it still doesn`t work. Thanks for the answer in advance.

[@duotwinzzlivemusik557]

@@PTranProductions Yes I did this. I`ll try again.

[@PTranProductions]

@@duotwinzzlivemusik557 You can also double check your ribbon cable connections to make sure they are not in reverse/backward.

[@duotwinzzlivemusik557]

@@PTranProductions It works! Halleluja! Thanks a lot. The contrast cable was wrong connected.

[@PTranProductions]

@@duotwinzzlivemusik557 Congrats!

[@Ave200]

Do you know how to fix the screen for a dgx 670

[@PTranProductions]

I would say no because I never done one myself. However I guess it would be similar to this DGX-620. Replacement screen available on eBay which looks similar to this DGX-620. www.ebay.ca/itm/Dedicated-LCD-screen-for-Yamaha-keyboard-PSR-S550-S650-670DGX-series-/255201748868?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0

[@claudiaholmes332]

Could you post the link for the replacement part again please? I have the same model that has the identical screen problem. The unit is currently in a repair shop that is Yamaha authorized, but the owner is telling me he is having trouble locating the part.

[@PTranProductions]

Just found this amazing item on AliExpress. Check it out! C$79.05 9％ Off | NEW Original lcd screen for YAMAHA psr s500 s550 s650 mm6 mm8 DGX520 DGX-620 DGX630 DGX640 LCD screen Display Repair replacement a.aliexpress.com/_mKRh6nk

[@PTranProductions]

www.ebay.ca/itm/404451267302?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=idrewm9ur3m&sssrc=4429486&ssuid=&var=&widget_ver=artemis&media=COPY

[@BoomBang101]

what if you have no solder skills

[@PTranProductions]

Well, If you don’t have any soldering skill, then this won’t be a DIY project for you. 😀

[@BoomBang101]

@@PTranProductions how would i repair it then?

[@PTranProductions]

@@BoomBang101 If you have any friends who knows how to solder to help you out, that would be one option. Another option is to cut the old wires and join with the new wires by twisting them together then tape up the connection - be sure to match wires correctly.