Yamaha F115 Water Pump Replacement

Рет қаралды 28,488

Күн бұрын

Пікірлер: 36

@kretieg2943 3 жыл бұрын

I do not even have my boat yet but I know it will come with a Vmax SHO 115 which is basically the same engine with different cam shaft and computer. I have been looking for videos on problem points with this engine and the water pump is near the top as is misfiring on #3 and #4 from fowled plugs and bad diaphragms on the fuel pump from letting it sit too long. Your video has been very helpful for the future. Service centers are expensive as hell and you made the job look simpler than it sounded. I am still 2.5 years out from getting my Stabicraft 1850 but at 50yo I've learned that it's never too early to do your research early and do plenty of it. I have used boats enough to know that things DO wear out and go wrong. If you bury your head in the sand and wait for it to go away, it won't end well. I don't want to be 15-30 miles out in the Gulf and have to get towed back cuz that ain't gonna be cheap OR fun. Subbed

@xlandscaper 3 жыл бұрын

Thank you for watching. I’m glad I was able to help you out. Yes the whole water pump change is not as hard as it sounds. All the maintenance on this engine is easy to diy and save a fortune. I will be adding more videos as I preform more servicing. Good luck with your boat when you eventually get it!!

@PumkinHoneyBaby Жыл бұрын

Thumb up! Thank you for great video, just bought a kit for replacement water pump. (Just bought boat, it had 160 hrs). Cost too much at dealerships.

@xlandscaper Жыл бұрын

Glad it helped. DIY and save$$

@nolanconlin7236 3 жыл бұрын

Great video. Informative but concise and to the point. You got my sub!

@xlandscaper 3 жыл бұрын

Awesome! Thank you for watching and thanks for the sub! Glad I was able to help out!!

@glennllewellyn7369 2 жыл бұрын

Great stuff mate. Australia!

@xlandscaper 2 жыл бұрын

Thanks for watching over the pond! 💪👍👍👍

@furlongspeedmarine 3 жыл бұрын

About to do this on a 2000 Parker 18 tomorrow!

@xlandscaper 3 жыл бұрын

Niceeee! I forgot to mention a few key pointers like changing the dowel pins, the pain in the ass woodruff key and when re installing the lower back into the upper to be careful of the water line and make sure to align the shift shaft back up. I love this little boat, it does everything a inshore a fishing boat should!

@andrewrose7172 Ай бұрын

what kind of grease do you use? For the housing and bolts? I've heard using dawn dish soap works too, every try that?

@xlandscaper Ай бұрын

@@andrewrose7172 Dow corning111 because I have an abundance of it but a light coat of silicone or regular grease works as well. Never tried the dawn but I’d probably stay stick to grease as it won’t wash away a quick as soap

@andrewrose7172 Ай бұрын

@@xlandscaper Thank you. Also, how do you get the wire on the back of the motor off? Just clip the zip tie and put a new one on? I could not get mine out because of that wire. Thanks

@xlandscaper Ай бұрын

@@andrewrose7172 yup, just cut the zip tie and add another when your done

@MannyMerc 6 ай бұрын

Use your old impeller to seat the metal ring over the split washer.

@xlandscaper 6 ай бұрын

Thanks for the tip

@1811bruce 2 жыл бұрын

Good job! New sub. here.

@xlandscaper 2 жыл бұрын

Thank you!!

@kimseymour8896 3 жыл бұрын

That was easy good job

@xlandscaper 3 жыл бұрын

Definitely not too difficult. Save a ton if you DIY. Thanks for watching!!!

@joshuaramquist9909 Жыл бұрын

What purpose does the ring with plastic bushing serve?

@xlandscaper Жыл бұрын

Your guess is as good as mine but it was on there from the factory and I’m sure it serves the most important purpose on the whole engine. Forget to reinstall and it grenades, sets itself on fire but cancels your insurance policy before it does.