Very well done, that warning about over torquing those fasteners cannot be over stressed, they strip super easy.
@trapper43213 жыл бұрын
Very good video, learned the hard way on my older ATV that it does not take much torque at all on those small fittings. Thanks for the reminder.
@bounce1211 ай бұрын
The left front tire when sitting on the bike has a plastic panel in the wheel well that you can remove to get at the filter easier than taking down skid plate
@urbanacres718910 ай бұрын
That is how I do it now as I have metal skid plates.
@mikevechiola62232 жыл бұрын
Great video...love the way you simplified everything that needs to be done, covered everything, most videos don't.👍
@5784ridgerunner4 жыл бұрын
Awesome and instructive video. I too have a 2020 grizzly XTR , and can’t wait to see more service videos that you’ll be putting out.
@urbanacres71894 жыл бұрын
kzbin.info/www/bejne/bqCvcoKKnN6Mpsk
@dragonslayer12284 жыл бұрын
This is my favorite ATV
@MrMharley3 жыл бұрын
Thanks for a great intuitive video and good camera work too 👍🏻happy trails
@urbanacres71893 жыл бұрын
Thank you
@JB-573 жыл бұрын
Great video bud , very helpful. I was a little skeptical about doing the first service on mine but it seems simple enough. Thanks man new sub here!
@marshallandgunner27752 жыл бұрын
Love your videos, great job on explaining and showing everything awesome channel please keep up the great work... not much out there for the newer Grizzlies.
@urbanacres71892 жыл бұрын
Thank you for encouraging words
@Paul245914 жыл бұрын
Thanks for the video, very helpful. Did you say $700 for break in service? That's crazy, should have been around $150.
@Maritimer4 жыл бұрын
Hey man, about to change the diff fluids in my Grizzly as well just for some maintenance stuff, thought I'd check out a few videos and see how others are doing it. thanks for sharing !
@urbanacres71894 жыл бұрын
I also just did the first 20 hours service on my 2020 Kodiak before installing the full powder coated Ricochet skid plates set
@northerntoyota75843 жыл бұрын
Great video. Just waiting for my 2021 xtr to show up. A lot of people never change their diff fluid and I don’t know why
@urbanacres71893 жыл бұрын
I have neighbor who has not in 8 years
@Palomino4884 жыл бұрын
Great video! I’ve been trying to learn more about the Yamaha products and this kind of video helped a lot. Hope to see more videos on this machine.
@jadscott25853 жыл бұрын
A tip: watch series at flixzone. Me and my gf have been using them for watching loads of movies during the lockdown.
@quintongrey23973 жыл бұрын
@Jad Scott yea, I've been using flixzone for months myself :)
@sethmitchell97832 жыл бұрын
Awesome, down to the point blessings fr N.M
@chrise.4003 жыл бұрын
Not sure about Yamaha, never owned one of their ATV’s...though will be looking in to one soon. That said, I am fairly certain they check valve tappet clearance as well after the first 100 miles. Relatively simple procedure but worth looking into as its normal sometimes to get some slight out of tolerance readings after initial break in.
@urbanacres71893 жыл бұрын
Any videos on how to do that?
@markvanderhelm9222 жыл бұрын
Awesome vid man
@mikem04rubi2 жыл бұрын
Great video thanks man.
@alexh59444 жыл бұрын
Crossthreaded my oil plug on my 01 ninja 600... Drilled a hole through the head so i could wire it in place nice and snug and also used some thread tape on it.. Never any leaks the next 7 years Lol
@fattie25503 жыл бұрын
What all cost $100.00 dollars for the 20 hour maintenance? Great video.
@urbanacres71893 жыл бұрын
Synthetic Yamalube engine oil, Front and rear diff fluid, 3 different washers for drain plug, oils filter and brake parts cleaner.
@John-viheavyequipment2 жыл бұрын
have you done a oil change video? id really like that
@urbanacres71892 жыл бұрын
Will have one up in less than a week.
@John-viheavyequipment3 жыл бұрын
very good video thank you
@mapleridgefarm10262 жыл бұрын
Hi , thx for sharing! Saving me some time for sure, just a 2017 grizz 700 with 2000km and the diff oil was never changed so definetely due. Why did you not use the old copper washer from the drain plug?
@urbanacres71892 жыл бұрын
User manual calls for washer change. I just followed the instructions from the manual. You may have a small leak if you don’t replace the washer and/or water can sip in when submerged.
@hungbeachbum3 жыл бұрын
I have the exact same 4 wheeler, about to do the 20 hour oil change on,,I bought the extended warranty with mine,,do you know if it voids warranty if I do the maintenance work myself like your doing?
@urbanacres71893 жыл бұрын
No it does not void your warranty. Keep the receipts of all the stuff you buy. Even better buy it from dealer. Oil etc
@qapsukalek Жыл бұрын
16,000 miles mine was black as hell
@greenlandbackcountry7560 Жыл бұрын
Thanks for nice video I have some weird sound from my clutch when I accelerate while I start to ride it is disappearing after riding for a while ! Any thoughts ?
@fischerhobbs17323 жыл бұрын
Can you use the same oil for both the final gear oil, and differential gear oil?
@urbanacres71893 жыл бұрын
Yes but if it is the same gear oil as I show in the video.
@elpadrinogo174 жыл бұрын
What’s the copper item number or part number. And where did you order?
@FLY27P3 жыл бұрын
Good video. But the machine is so clean, it looks like it has not been ridden.
@urbanacres71893 жыл бұрын
All my vehicles are fairly clean most of the time. I certainly don’t do any mudding or anything unless it is on the trail and unavoidable 😄
@claytonmundy12693 жыл бұрын
How fast does the xtr go
@urbanacres71893 жыл бұрын
I have only taken it as fast as 55. I am sure others will chime in and they might have taken it faster.
@claytonmundy12693 жыл бұрын
Well if u do a top speed run it would make it good video
@r3ddog7003 жыл бұрын
What’s a good torque wrench for the torque specs on Grizzly? TIA.
@urbanacres71892 жыл бұрын
I have a snap on digital torque wrench. I don’t know which one is the best though. I have trusted myself in the past without one and have not regretted it so far.