Yamaha Grizzly 700 Rear Axle Seal Replacement DIY

Рет қаралды 13,554

Күн бұрын

Пікірлер

@ManzanoMan_Adventures 2 жыл бұрын

These types of videos are so informational and without a doubt will help someone who is needed to replace the axle seal. The amount of money a shop would charge for this type of job would be really steep i imagine just in labor alone. You explain the steps well and get right to the point. Great job.

@kcatv9556 2 жыл бұрын

Hey buddy, yeah I think that’s the cool thing about KZbin is sharing how to videos. I know I watch them myself and pick up tips and tricks here and there. Thanks for checking out the video my friend hope you have a great weekend!

@ruyguy8888 2 жыл бұрын

I've certainly put enough of those Axles seals on my old 660! Nice to see they haven't changed much in the 700's. Nice explination video.

@kcatv9556 2 жыл бұрын

Hey ruyguy, Yeah I suppose they haven’t changed much over the years. Yup I bet you have put a few of those in your self. You’re like me, always work on our own stuff. Thanks for checking out the video my friend!

@Maritimer Жыл бұрын

Hey man ! I really like your maintenance videos like this, 1) you have the most amazing shop ever, that's every guys dream ! 2) you have a lift 3) lighting is perfect ! Annnd I could listen to the sound of air tools all day haha I love it. It'ssure nice to watch someone who really knows what he's doing, it's like you did that 1000 times. Did you used to be a mechanic of some kind? Side note: Can we get a video on that beauty old white Chev truck you have there, holy crap I don't see many like that around my neck of the woods.... Canadian Winters are hard on cars..... Salt on the roads, Salt in the air haha

@kcatv9556 Жыл бұрын

Hey buddy!, Haha Yes I work on cars for a living. I’m a mechanic for Nissan& Infiniti dealership. Not able to retire like Q yet. Anyways yes I love the shop makes it convenient to work on stuff. Oh yeah I imagine the salt you guys use for the roads really takes its toll on vehicles. I bought the truck out of Kentucky over 10 years ago they don’t use Salt, so it has no rust. Glad you’re liking the maintenance videos really appreciate you checking them out!

@stacyreid5077 2 жыл бұрын

It’s been a long long time since I had to work on a Yamaha I need a new transmission case for my 2006 Yamaha Rhino 660 Thank you for the great video you uploaded

@kcatv9556 2 жыл бұрын

Hey Stacy, So the transmission case went bad on the 06 rhino? Thanks for checking out the video buddy!

@stacyreid5077 2 жыл бұрын

@@kcatv9556 yes the case I was told cracked and it’s inside the motor housing from what the mechanic told me which is why it is so high in price to repair or replace. I’ve been trying to think of something that I might could use to replace the motor and transmission in it and use something like a Honda motor and transmission from a quad

@phillipgroom9187 2 жыл бұрын

Good job, I hope you make a video showing the replacement of the wheel bearings. Thanks for sharing the video !

@kcatv9556 2 жыл бұрын

Hey Phillip, Yup Wheel bearing replacement video coming up next. Thanks for checking out the video appreciate your support always!

@phillipgroom9187 2 жыл бұрын

@@kcatv9556 Thanks and thanks for sharing!

@kcatv9556 Ай бұрын

Hi, sorry for the delayed response. There’s no need to drain the rear differential fluid when pulling the axles out. Fluid will not run out. I drained the fluid on mine because I was pulling the seals out and it was due for a flood change. Hope that helps you out. Thanks for checking out the video.

@quaddingsous 2 жыл бұрын

I love these shop videos you do. Always a good job of explaining "how to" and you get straight to the work without filling our ears with a bunch of preamble that puts us all to sleep - lol So, as usual, I have a question: Was your diff oil milky because you got water in it or because of the type of oil you use? (I was assuming "water", but thought I should ask) Can't wait for the wheel bearing video - YEEEEHAW! - I love this S#!T

@kcatv9556 2 жыл бұрын

Hey buddy, Yup shop videos to fill the time slot till rides begin eh Another guy was asking about the diff oil as well looking milky? Yup that’s the way it looks in jug. Thanks for checking up video buddy always appreciate it!

@timalmich1964 2 жыл бұрын

Thanks for another great how to video. Hoping to come down to ride with you in august or September. Keep the videos coming.

@kcatv9556 2 жыл бұрын

Hey Tim, Thanks man, yeah hopefully you’ll be able to join us on a ride later this year. Thanks for checking out video bud.

@SCOTIAN_ 2 жыл бұрын

Great shop video , well I just like your shop lol . I was trying to watch tv but you blurred it out lol . It’s almost like you have done this once or twice before 😂

@kcatv9556 2 жыл бұрын

Hey Buddy, haha yeah I forgot all about having the TV on when I was filming. LOL I knew if I didn’t blurr it out I’d be stuck with the copyright thing from the KZbin LOL Yup done it a timer or two working on cars for a livin I bet you’ll enjoy the wheel bearing video. Working on it right now as we speak. Trying to get it shortened up don’t wanna make it a long video. Thanks for stopping by and dropping a comment my friend!

@stevemiller4148 2 жыл бұрын

Good video my friend, looking forward to seeing the wheel bearings replaced. And Q, as far as you go, you have a Honda so you don’t need to worry about it breaking down😂🤣

@kcatv9556 2 жыл бұрын

Hey Steve, haha Yup Q doesn’t have to worry about axle seals and wheel bearings! LOL Actually editing the wheel bearing video right now. LOL Thanks for checking out the video Steve and appreciate the comment.

@shawnantel8238 2 жыл бұрын

Great job buddy! See you on the next one.

@kcatv9556 2 жыл бұрын

Thanks Shawn , appreciate you checking out the video.

@factionfx 2 жыл бұрын

Looking forward to your next video. So, for the seals, there is an inside lip on the passenger side, but no inside lip on the driver side? Looking fwd to seeing the wheel bearing replacement.

@kcatv9556 2 жыл бұрын

Hey there factionfx, That’s correct there was no inside shoulder for the left side seal to bottom out on. Working on the next video now hopefully you enjoy it. Thanks for checking at this video.

@northernoutlier Ай бұрын

Great video! I do have a question. I am about to replace my rear axles on my grizzly 700 and I am wondering about the fluid in the differential. Do you have to drain it prior to doing the axles? I just see people pulling the axles out and replacing and there is no mention of the fluid. You on the other hand mentioned filling it back up. Do you have to do this or just recommended?

@Bsimmons77 Жыл бұрын

Thanks for the video. Gotta do this to a Rhino in the next few days.

@kcatv9556 Жыл бұрын

Hi Brian, Your welcome on the video. Hope it helps some folks out. Appreciate you checking out the video!

@rodneyfarwell3396 2 жыл бұрын

Well done how to video. This will for sure help guys out in the future. Are you going to just replace all of your wheel bearings or is the other side good? Looking forward to the next one!

@kcatv9556 2 жыл бұрын

Hey Rod, Yeah hopefully it will help some folks out if they are needing to do the same thing. Yup replacing all four wheel bearing. Actually editing that video right now. LOL Thanks for checking out the video!

@BobElgin 2 жыл бұрын

Lot of good info! Wonder if it would be the same on my Wolverine . Again you garage is unbelievably clean. I noticed you blurred the screen on your TV . How do you do that? Thanx Fer Sharin

@kcatv9556 2 жыл бұрын

Hey Bob, I imagine it would be the same on a Wolverines. The editing software is how I blurred out the TV screen. Figured I’d be hit with copyright if I didn’t. Thanks for checking out the video buddy.

@jacknovela 26 күн бұрын

Hi man your work is great I like to watch each video. I need your help, could you tell me the inner and out size of YFM 400cc kodiak grizzly midle drive oil seal, both of them (front and rear).

@kcatv9556 26 күн бұрын

Hi Jack, I have no idea what the size of those seals are? If you are needing to replace them, just buy the factory seal and it should be the right size. Hope that helps you out, thanks for checking out the video!

@jacknovela 25 күн бұрын

@kcatv9556 thanks dear, I tried to use the parts number, but in Alliexpress is not easy to find.

@normsatv 2 жыл бұрын

Looks good got to keep up on the seals just drop my bike off at shop do rear seal and possible the front ones . 👍

@kcatv9556 2 жыл бұрын

Hey Norm, Yeah buddy I bet you guys are in the deep freeze right about now? For sure I gotta keep good seals in the diffs definitely don’t want water to get in. Thanks for checking out video my friend!

@brandondimmitt8467 3 ай бұрын

Yall use the old seal over the new one to beat in the new one don’t beat your new seal.

@kcatv9556 3 ай бұрын

Yup, good advice. Thanks for checking out the video. Much appreciated.

@tlpoutdoorsman 2 жыл бұрын

Great video!!!! How did you learn how to do all of this🙂

@kcatv9556 2 жыл бұрын

Hey tipoutdoorsman, thanks glad you liked the video. Work on cars for a living so I guess that’s how I know how to do this type of stuff. Thanks for watching!

@tlpoutdoorsman 2 жыл бұрын

@@kcatv9556 I'm jealous

@gregdavis5339 2 жыл бұрын

Would it work better if you made a wooden dowel the same diameter as the seal to hammer it in? Just a suggestion but still enjoying these dyi videos

@kcatv9556 2 жыл бұрын

Hi Greg, Yes something like that would work. but didn’t feel like taking the time to build something like that. Much easier to just install it and be done. Thanks for checking out the video my friend!