Yamaha Grizzly CV Boot Replacement | Yamaha Grizzly YFM700 | Partzilla.com

Buy parts for your Yamaha Grizzly YFM700 CV boot replacement: bit.ly/yamaha-G...
We’ll show you how to replace the CV boots on your Yamaha ATV in this video from Partzilla.com. This job will take two different part numbers to get both boots you need for the half shaft, so check out the link above to get both part numbers AND the Yamalube race grease you’ll need for the reassembly.
Once we get the wheel off, we’ll dig in and disconnect the hub so that we can access the half shaft. Then, we’ll show you how to remove the half shaft on your Yamaha ATV so that we can get it over to the bench.
The clips Yamaha uses to hold the CV boots in place are pretty easy to use. The kit comes with new ones, but in a pinch they can be reused and they do not require and special tools to get them in place and tightened down. Once we get the CV boots replaced on our Yamaha Grizzly, we’ll get the half-shaft back on, re-mount the hub, and get the wheel back in place. Pay attention along the way: John will give you the exact torque specs Yamaha requires for these very important bolts that hold your front suspension together.
Read how to do this job step by step: www.partzilla....
VIDEO HIGHLIGHTS:
Disconnecting hub - 1:30
Removing half-shaft - 3:50
Removing old CV boots - 4:10
Replacing CV boots - 7:20
Replacing the half-shaft - 10:00
Replacing the hub - 10:30
Find thousands of Yamaha ATV parts here: www.partzilla....
Talk to us:
Twitter: / partzilla
Facebook: / partzilla
Instagram: / partzilla
In the video we’re working with a 2007 Yamaha YFM700 Grizzly, but you may have similar steps for your Yamaha ATV. If you’re not sure whether these steps apply to your machine, leave a comment and we’ll get back to you.
RELATED CONTENT:
YFM700 front brake pad change::
• How to Change the Fron...
How to change the brake light on a Yamaha Grizzly:
• Replace the Brake Ligh...