Yamaha MT-07 OIL CHANGE How To EASY (The RIGHT Way!)

[@CycleCruza]

Links to Get Stuff in Video ⬇ Get Bell Carbon Helmet (Best Ever!): cyclecruza.com/vhxg Get Rotella Synth Oil: amzn.to/4d2MtAM Get K&N Oil Filter: amzn.to/3W592xU Get Oil Catcher Container: amzn.to/4cIEAkf Get My Torque Wrench (Cheap!): amzn.to/3W7PJE8 Get My Smart Watch: amzn.to/45fB7GW Get Adjustable Oil Filter Wrench: amzn.to/3W3NNwb Get Cush Washers (Cheap!): amzn.to/3LqtYdJ Get Absorbent Mats: amzn.to/4bIwLty Get Disposable Gloves (The Best!): amzn.to/4d1hnt9 Get AIRBAG Vest (On Sale!): cyclecruza.com/w34j Get My New Shorty Gloves: cyclecruza.com/w7ae Get Sedici Garda Pants (Best for Street): cyclecruza.com/vb8e Get My CE Armor Jacket CHEAP: amzn.to/3RpXKm5 Get My Street Riding Boots: cyclecruza.com/uubp Get My Vented Socks: cyclecruza.com/0bww Get My New MotoVlog Camera (On Sale!): amzn.to/3R4MiLY MY MT-07 MODS: Get Akrapovic Full Exhaust: cyclecruza.com/z0xo Get K&N Air Filter: amzn.to/3UXVTV7 Get Dynojet ECU Flasher: cyclecruza.com/lcbq Get Bar End Mirrors: amzn.to/3TlbJZu Get Restart Lithium Battery (Never dies!): cyclecruza.com/ymjz Get Yamaha 12v Accessory Plug: cyclecruza.com/ay3l Get Radiator Guard: amzn.to/3Ev7Xrr Get Phone Holder Wireless Charger: amzn.to/3CQFtX2

[@CadeBlendon9593]

I love how fast you pulled your hand away after the oil bolt let loose and you cracked your hand.😂😂😂 It never fails.

[@bridgettdixon6807]

Cycle i started Rotella because of you, its the best.

[@DàvidNewton-u7q]

Nice post thanks, as a footnote you should always wipe clean the mating surface of the filter housing and the sump plug, just in case any any grit or dirt gets on them when plug and filter removal occurs.

[@docsamson2299]

I've used Rotella T6 in autos and bikes. Have submitted numerous samples for oil analysis and it always comes back with a positive report on the oil itself. Has also helped me detect issues within the engine that I would have never known about until much later...

[@kevinhagberg1648]

Man theres no beating an all black MT07 baby!

[@HauntedOath]

I literally just hit 600 miles on my mt 07 (first bike) I wanted to take it to a dealer for my first service but its so expensive where i live ($400 in WA state) so im thinking im gonna do it myself since from what I understand its a glorified oil change and this looks simple enough. Video popped up at the perfect time lol

[@florme6494]

Yep, price seems high.

[@kevinhagberg1648]

Here in California I was charged $300 and the tech told me id have to bring it back because they couldn'y get my axle sliders off the rear to adjust the chain. That was when I knew I would never be taking the bike back to get serviced by the dealer. I just did my second oil change and chain service, easy! Get some stands!

[@Skatemonster]

Just hit 601miles on my new 2024 MT07, time for first oil change.

[@Pahlmer]

Should do an air filter cleaning video next

[@phantomnus]

Write the day and miles on your oil filter, it helps

[@BobTheHatKing]

And old-timer’s trick if you don’t have an oil filter wrench, use a chisel or screwdriver and jam it into the side of the filter and use that to turn it. Obviously this only works if you don’t have a cartridge style filter. Also make sure your old oil filter gasket came off or you’ll double gasket and it’ll leak

[@Marksmith2-qu6tl]

What brand oil is best and weight .thanks

[@alexgroezinger762]

Hey cyclecruza what’s your opinion on a Daytona 675r?

[@CycleCruza]

Cool bike, looks nice BUT you won't be very comfortable riding on the street for long rides. if you only ride street you'd better served on the Street Triple which has the same engine but better tuned for the street with more grunt.

[@Joseph-jo6rm]

I like your accent bro.

[@heyitsmeshane]

JEEZ buy him dinner first at least 😂

[@BobTheHatKing]

Motorcycles use the same oil on their transmission and engine, so I’ve heard it’s best to use oil formulated specifically for motorcycles

[@Serckep]

No shit I was gonna use my MC Chicken spare fried oil. Thanks for the awesome heads up, you're a life savior.

[@gabrielkopp2036]

Ride it down the street and back to warm the clutch up too

[@CycleCruza]

Eh that's good to do for sure. The best is when you come in from a super long ride and then do an oil change.

[@rollthers3157]

Great video! I appreciate the how-to tips. 👍

[@CycleCruza]

Thanks! It has been a long time since I did a maintenance video. I have another one to do for the YZ450FX new stator install from a WR450F.

[@myztklk3v]

I went from a CBR500R to an R6 and I absolutely hate changing the oil on the R6. The CBR had the oil filter in the front by the headers like your MT07, the R6 is on the side behind the shift linkage and requires you to take plastics off.

[@CycleCruza]

I know how you feel. Yeah the CBR wasn't bad but I still had to remove those freaking fairings to work on it. I really appreciate the naked bikes. R6 is a cool bike tho, amazing track bike still to this day.

[@EmoKen]

I've rode an 2003 R6 couldn't get over no fuel gauge and I personally installed a gear indicator that was plug in.

[@myztklk3v]

@EmoKen I don't mind the lack of fuel gauge, it has a low fuel light at least lol. My/the 2020 has a gear indicator stock, its a nice to have, my cbr never had one

[@myztklk3v]

@CycleCruza I always wanted one, and then they changed the look in 2017 and made me want one more and then they discontinued them, so it was now or never I felt like, now their value has gone up. I'm probably going to sell it and get an r9 when they finally announce it, I'm almost 40, I love my bike but my back doesn't.

[@lohoffssonloffman9668]

Hey Cyclecruza, how would you say the vibrations are from the footpegs/handlebars on the 701 and yz450fp, could you compare it to a Drz400s? Or your mt07?

[@CycleCruza]

I have yet to ride a DRZ-400. There is very little vibration at the pegs on my 690 SMC R, it actually has rubber inserts in the pegs. My YZ450FX doesn't really have a lot of vibrations at the pegs or bars, no issue for me.

[@davidmcmillan1477]

I went to my local motorcycle shop and they didn't have a crush washer... It is a huge dealer...

[@GrecoRoman123]

Bike says 2300 cubic centimeters at 8:32, but 2.75 quarts equals 2602 cubic centimeters. I guess the difference in oil amount is okay?

[@BobTheHatKing]

300 cc isn’t much difference of oil, but idk if it’s significant enough. I work on cars and those you can be a quart low and be fine. That said, motorcycle engines are smaller and use less oil, so being 1 qt low is a lot. 300 cc, idk

[@mikeskidmore6754]

I paid $20.00 for Castrol 10W-40 5 quarts motor oil and $4.50 for Frame Filters for my FZ-07 . Gasoline savings oil can be too slipper for wet clutches. "Gasoline savings oil" K&N Oil Filters cost 3 times what they are worth . I tighten oil filters about as tight as I can get them with my fingers.. with oil added to the rubber gasket.. I put a mark on my 5 quart container.. I think it takes 2.75 quarts or 3.75 quarts.. Now I Keep filling the marked container with oil from other 5 quart containers. Starting the bike up and letting it idle for a bit is a bad idea. Start the bike up and take it for a hard ride then change the oil .. Hot oil suspends the contaminants and metal shavings ect.

[@CycleCruza]

Shell Rotella T6 5W-40 is Jaso MA/MA2 rated, actually has a small picture of a motorcycle on the front of the label. I use Shell Rotella T4 15W-40 in my 2018 YZ450FX supermoto every 8-10 hours since day 1 and my bike runs better now than it did new. I've been using Rotella oils since 2012 with no issues. However, all that matters is use the oil you like. When you change oil every 8-10 hours it can get expensive with more expensive oils that are really a waste of money. When it comes to tightening anything on a motorcycle or car you want to tighten it to the manufacturer's specification in the service manual, especially when it comes to an oil filter and oil drain bolt. If that oil filter rattles loose because it is tightened right and leaks, that could set your bike and you up for a f'kd up day.

[@mikeskidmore6754]

@@CycleCruza Looks like your shell T-6 is fully synthetic. $70.00 for 3 gallons. I used to pay $4.00 per gallon for motor oil . and 54 cents per gallon for Deisel fuel .

[@mikeskidmore6754]

@@CycleCruza Walmart oil prices are all over the place. My power sports dealer raised the price from $8.00 to $12.00 for my Buell. The same Fram Filter also fits the Kawasaki Mule . I searched the part Number and found the same filter for $4.11 at Walmart so I ordered 3 of them .Plus some other items to get free shipping.

[@Frank_Torre]

Ah those were the days owning a naked bike and not having to remove fairings. That said I'd still choose my R6 over the MT07. Which is why I've not gone back to the MT07.

[@CycleCruza]

Eh the R6 is a great track bike, that bike helped my cousin win races and become a pro racer. However, the days for me riding a supersport or s superbike on the street were over when I first started riding naked bikes, way more comfortable and more grunt. There are so many great naked bikes these days it is tough to go back to riding track bikes on the street. They are beautiful tho! Much prettier than naked bikes but when you throw a leg over the bike the looks don't matter anymore. Stay safe!

[@Frank_Torre]

@@CycleCruza True, but the look back factor always gets me with sportbikes or supersports. No matter where I go soon as I get off and 5 feet away I look back and stare at my R6. Sportbikes just have that effect. Hell even the new CFMoto 675SR R Triple has that effect. It legit looks like the bike Triumph should've released as the new Daytona.

[@CycleCruza]

@@Frank_Torre That is cool, all that matters is what makes you happy and that you are riding. You'll probably go through some different phases. Most of my friends I grew up with that rode sport bikes are all on big azz harleys now. lol They say I need to grow up and get a real man's bike. 🤣

[@340ironman]

R6 has that look back effect. Beautiful bikes

[@Frank_Torre]

@@340ironman Exactly the R6 will forever have an iconic beautiful look to them.

[@EmoKen]

Never seen a oil filter remover like that. I have that looks like a wrech 😅

[@CycleCruza]

Me either, I went on Amazon to buy an oil filter wrench and saw it with high ratings so I bought and it worked out great. I will probably only ever use it when the very first change on a new bike because I always switch to a K&N oil filter with the nut on the end.

[@EmoKen]

@@CycleCruza A-Spec

[@BobTheHatKing]

Rare footage of CC wrenching (because he doesn’t ride Harleys) 😂

[@BobTheHatKing]

9:08 no f’ed up days 😂

[@everss02]

T6 is the best, just change it more often if scared

[@CycleCruza]

Yeah I;ve always changed the oil at 3k miles and had zero issues with the T6, used it since 2012 with no issues. I use the Rotella T4 15W40 on my YZ450FX ever 8-10 hours and the bike rides better now than it did brand new. For the KTM, I will actually let KTM do the oil change and they can use their special oil. For any Japanese bikes I will always use Rotella oils, I don't care what the oil snobs say, lol

[@r-kl9]

2.5 is wrong. Man says 2.8qt.... right way is a joke 😂...

[@Szlejer]

Hire someone else for the job. Nothing easier than that. Case closed. :D

[@CycleCruza]

And hope they do it right. Actually, if you notice in this video, when I took took off the drain bolt it was on so tight that I nearly messed my wrist up. This was actually the very first oil change on this MT-07, the dealership I bought it new from tightened the drain bolt way too tight and not to spec. Oil change is so easy to do that is is a sin to not do it yourself. My friend's car got messed up from going to a 10 min oil change place.

[@winter-survivor]

Believe me, some "specialists" out there can do horror things on your bike. You just can't trust anybody these days unfortunately. The more you learn about maintenance more horrified you become hahahah