How to change the oil in your motorcycle - Yamaha MT07 (fz07)

[@jesserios861]

Sick ass vid man 💪🏽😤 excellent explanation and walk through 💯

[@shpat7440]

Great video! 🫡

[@Kmoto530]

Thanks 🙏🏼

[@astrostrotch]

Nice, oil and filter change is cheap insurance, do it guys, it only takes 10 minutes 😀

[@Kmoto530]

Exactly…very quick and easy job. 👍🏼

[@gorrdd]

Nice review on the MT07 oil change procedures. Thanks... Gord

[@Kmoto530]

Thank you 🙏🏼

[@PaoXiong86]

the oem yamaha oil filter o ring come with grease on it

[@Kmoto530]

Yes it came with a film of grease but not all filters do 👍🏼

[@Keno_psia]

As long as it's between those two lines it's good right? I mean does it have to go max?

[@stevetheaxe]

Great vid. Do you do it more often than they recommend? If so, how many kms or miles do you go?

[@Kmoto530]

Thanks. I’ve actually been changing it based on how it looks. As soon as it gets dark enough where I can’t see the metal piece inside the spyglass I change it. That’s been more frequent than recommended but I don’t mind.

[@stevetheaxe]

@@Kmoto530 Cheers mate. I think I'll do the same. Love my MT. Ride it every day rain hail or shine.

[@Walton1337]

Nice and easy vid to follow the steps! I got a brand new mt07 last year but got a ”problem” when changing gear especially 2-3 that it feels a bit harsh and hard. Like a small boom when changing gear. Is that normal for the yamaha bikes?

[@Kmoto530]

Thanks! That doesn’t sound normal. I’ve never had any issues with the transmission. I would get it checked out. If it’s still under warranty I’d take it to Yamaha.

[@comeonhay9899]

It happens with the FZ25, when I change gears from 1-2, it does make a sound. Check the idle rpm, it’s supposed to be on 1,300 rpm and check the chain tension

[@rebellucy6200]

I have a new 2023 and experiencing hard shifts also. Did you get it fixed or serviced? I was planning on taking mine in to the dealer.

[@Kmoto530]

@@rebellucy6200 that’s interesting. Double check the chain tension as mine became too loose a couple weeks after purchasing. If that looks ok I’d suggest taking it to the dealer for inspection. Best of luck

[@comeonhay9899]

At the begging I got scared when you were losing the oil nut since it was too tight. My FZ25 oil nut needs just 15 foot pounds torque not 32

[@Kmoto530]

Yes, the mt07 manual recommends the drain bolt be torqued down to 43 nm or 32 lb ft.

[@peterg6638]

I have the same bike and color😊

[@Kmoto530]

It’s an awesome bike 👍🏼

[@roadwarrior8560]

You should wear gloves. engine oil is bad for you. Same crush washer does for years. 2.75 quarts! why don't you all go metric instead of 50/50? Good video.

[@Kmoto530]

Thank you for watching and your suggestions. 👍🏼

[@Serckep]

Quick tip: don't ever remove the top cap unless you're putting oil in. Dust might fall in, a fly, a piece of rock. Whatever. Useless and stupid idea to remove it beforehand.

[@Motoplugg]

Omg a spec of dust in your oil😂