Yamaha R1 GB Racing Engine Covers! Best Engine Covers and Protection for your Sportbike!

[@MotoViceOfficial]

I reply to all comments on my videos, so please support the channel by dropping a like, comment and subscribe for future content!

[@fredflintstone4087]

I found that if lift lightly on the plastic while turning the screws they actually come out so you can remove them easily. If you don’t lift while spinning then they just spin. Hope this helps.

[@fabienbable]

The problem with your "philips" screws is that they are actually JIS screws (japanese standard). Philips screwdrivers easily strip JIS screw. But JIS screwdrivers are compatible with philips screws...So I'd recommend you to buy a set of JIS screwdrivers. It helped A TON on my Honda! :) -Cheers

[@MotoViceOfficial]

Thats great to know. But let me ask you, What about the ones that don't come out no matter what type of screwdriver you use and aren't stripped?

[@mannya1171]

love the build series. waiting to pickup my 21 R1M, waiting on a few parts to come in cant wait!

[@MotoViceOfficial]

Nice! Show me the bike on instragram! I almost bought an M but I wanted to save the money and put my own taste into the bike.

[@NexusVibee]

Keep them coming! Loving the videos man!

[@MotoViceOfficial]

Thank you for the support!!!

[@roman2227]

worth mentioning that these are 12 point socket bolts - most people own 6 point sockets. this is probably why the bolts don't "match" because the OEM yamaha bolts are unconventional.

[@MotoViceOfficial]

That's a good point, but then they would need a 12 point to get them off properly. I know its a small little detail, but would love if they matched lol

[@ronaldomariano3502]

I got to say that MotoVice thanks to you i made a lot of mods on my bike wich is look great !!!!Thanks a lot for your videos keep it up!!!!!!!!!!!

[@arielnaidorf9315]

Thanks for the video! Suggesting to replace the current master cylinder to an brembo RCS 19 night and day difference in the braking department.

[@MotoViceOfficial]

So I wouldn’t be using the ASV lever anymore? Also do I need a new reservoir?

[@Halorox7295]

Nice video. Was considering buying these for my 2020 R6 and after seeing how easy the install is I think I'll do just that.

[@MotoViceOfficial]

This will save you a very expensive repair god forbid.

[@Taitaila-b5q]

Hello, I would like to know the socket size for removing the engine cover. The screws on the engine seem uncommon. What size socket do I need? Is this socket different from standard ones? Thank you, I have a 2023 Yamaha R1.

[@bccapone837]

Great video , were all the dowels flush at the back once all the way in , just got mine and one dowel on the biggest cover pokes out the back about 3mm when fully in

[@MotoViceOfficial]

Yes, theres a certain pattern they go in. They arent all the same size.

[@ruicosta73]

Hey bro, can you give me the link for the DLR lights, ie blinkers? Thanks

[@jcg_r6409]

That Akrapovic thing problem you have happend to me today😂, I was judging you that “Meh You just didnt tight that thing” well it backfires😂, went to home depot bought the nut and bolt put Loctite on it😂😂

[@MotoViceOfficial]

Noooooo!! That’s terrible! Well hopefully you didn’t lose your carbon shield!

[@Lineman22705]

Love the content!! Just picked up my 2021 R1M. Wondering what the process is for changing to a lithium battery. Simple swap or will a new batteries throw codes or do I need to reset stuff? Thanks bud.

[@MotoViceOfficial]

Hey there, super straight forward swap, no codes. Only issue is the Shorai brand does not come charged, hence why I always link and refer to the Featherweight in the parts description of my videos. One thing to note is that you need a different type tender for lithium batteries. Theres a good one on amazon I can link you but they dont drain like a lead acid, so I've never needed to use one.

[@Lineman22705]

@@MotoViceOfficial I have one. I have a Panigale V4S as well. Thanks for the info. Huge that you respond. I’m watching all your vids now. This R1M is a beast. I like it better than the Ducati. More aggressive. Better throttle response and I love the sound. Thanks again bud

[@MotoViceOfficial]

@@Lineman22705 Of course, I love talking with you guys! I will miss my R1 as I am selling it and then building out a track specific bike. Not sure what it will be yet.

[@armandblake]

Any oil spillage when removing those bolts? Also do I need a torque wrench?

[@MrPADDYOT]

Would it have killed them to make the bolts match the OEM ones? I'd gladly pay extra for the right bolts.

[@MotoViceOfficial]

Your telling me…..

[@petecastiglione9710]

I thought the spec for GB racing was 10nm for those bolts?

[@cephxll9920]

Hey can u let me know where u found the torque specs for all covers u put on was it in the owners manual? I can’t seem to find it or do they give u a paper with Torque specs for each different case

[@cephxll9920]

My bike just had a drop 🤦🏼‍♂️😭 as I think it was cause I was parked on a slight slope and it just rolled forward and folded the kickstand and dropped onto he left side have slight scratches on the stator cover so I’m going to orders these to hide them and for additional protection not taking any chances anymore also sorry to hear about ur crash hope u have a good recovery and get back on 2 wheels

[@MotoViceOfficial]

It’s in the service manual. It’s 4.4 ft lbs so I just converted it to inch lbs for my other torque wrench and used loctite

[@MotoViceOfficial]

@@cephxll9920 thank you man. Sorry to hear about your drop. That’s the worst. I dropped my R1 before I wrecked it too.

[@cephxll9920]

@@MotoViceOfficial so it’s 4.4 ft lbs for every bolt that u have to change out? N Thanks for the reply

[@cephxll9920]

@@MotoViceOfficial I found them thank you 👌🏼

[@zx6r98]

Finally got my graves !!!!!!!!!!!!!!

[@MotoViceOfficial]

Nice! How do you like it?

[@zx6r98]

@@MotoViceOfficial loving it

[@ryantran1533]

what did you set the torque wrench to?

[@MotoViceOfficial]

58 inch lbs from what I remember. Make sure to use lock tight though. They felt so weird at that torque.