Yamaha Raptor Micro H1 Bi-xenon HID projector retrofit | Yamaha Raptor Headlight Upgrade

Yamaha Raptor Micro H1 HID Bi-xenon projector retrofit
We have updated this kit and mounting has changed. In this video the new mounting method is shown: • Yamaha Raptor (new edit)
𝗬𝗼𝘂 𝗰𝗮𝗻 𝗯𝘂𝘆 𝘁𝗵𝗶𝘀 𝗴𝗿𝗲𝗮𝘁 𝘂𝗽𝗴𝗿𝗮𝗱𝗲 𝗸𝗶𝘁 𝗵𝗲𝗿𝗲:
retrofitlab.co...
𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 𝗼𝗳 𝗮 𝗕𝗶-𝘅𝗲𝗻𝗼𝗻 𝗽𝗿𝗼𝗷𝗲𝗰𝘁𝗼𝗿 𝗿𝗲𝘁𝗿𝗼𝗳𝗶𝘁 𝗸𝗶𝘁:
• Much better light output
• Double high beam (xenon + halogen)
• No glare
• Luxury OEM look
Because the wiring of the Raptor is different than cars/motorcycles the high beam function won't work plug and play.
With the Raptor, the low-beam signal is not active when the high-beam is activated. But with the bi-xenon projectors, the low-beam signal needs to also be active in high beam mode.
Unfortunately, we can't offer a plug and play solution for this. Our advice is to connect everything so the low-beam is working. And add a wire with a switch to supply a switched + signal for the high beam.
𝗖𝗵𝗲𝗰𝗸 𝗼𝘂𝘁 𝗼𝘂𝗿 𝗙𝗮𝗰𝗲𝗯𝗼𝗼𝗸 𝗴𝗿𝗼𝘂𝗽:
/ europeanheadlightcommu...
𝗙𝗶𝗻𝗱 𝘂𝘀 𝗼𝗻:
Facebook: / retrofitlab
Messenger: www.m.me/Retro...
Instagram: / retrofitlab.com_official
Our website: www.retrofitla...
𝗢𝘂𝗿 𝗦𝘁𝗼𝗿𝘆:
Retrofitting refers to the addition of new technology or features to older systems. These days there are a lot of people who put a simple plug & play xenon kit in their halogen headlight housing in an attempt to improve night vision and looks of their vehicle. In fact they don’t realize that their headlight beams are often worse than before. Night vision achieves relatively little improvement on night vision because of a poor beam pattern, which increases the blinding of other road users. This is because their headlight housings are designed for halogen and not xenon.
A true Bi-Xenon projector update is now possible for your car. Such an upgrade will significantly improve your light output from 700-2100 lumens to 2800 and 3500 lumens, without blinding other traffic with glare from your headlight. Upgrade your headlight OEM style!
The latest high power Led bulbs will upgrade both the exterior and interior lighting system of your car. Led lighting is becoming more and more popular in the automotive market for obvious reasons. They have longer lifetime, use less energy and improve safety with their fast response time.
Do you have any questions? Do not hesitate to contact us, we are happy to help you out!
Good luck with your retrofit!
These products are not ECE-approved and must not be used on public roads in any exterior application. Use on public roads will invalidate both the operating license and insurance coverage.

[@RaVAndres]

Nice video, you should show how the light output was improved. Any way, will it work on a Yamaha YFZ450R?

[@pat14lang]

Looking for a brighter light option for my ‘20 Raptor 700r SE. thought about doing this also, since i’ve done this type of retrofit to one of my vehicles before.

[@Retrofitlab]

This retrofit kit will definitely increase the light output of your current headlights. Besides that, it just looks so good!

[@pat14lang]

@@Retrofitlab any issues with water, dirt, or a little mud?

[@Retrofitlab]

@@pat14lang No, the headlights are completely sealed after the retrofit. There is a rubber cap included to get the cables out of the headlight from the back. So, not dirt, water or mud can get in the headlight.

[@LuisPonceAguilar]

hola disculpa donde consigues tus protectores para las lupas

[@pulkocitruzz]

Hello, didn't find the Micro H1 and the bracket on your website. Do you have a link? Very nice job (y)

[@mk2ingit]

Can you install LED projectors on a 2019 Yamaha Grizzly 700 handle bar light? Yamaha put leds in the headlights but put holegon in the handle bar light.. Not sure why Yamaha did that.. Like me, many people are looking for a clean solution... A nice retrofit led projector kit would be nice.. A light bar is one solution but I hate light bars. Let me know when I should send my light out to you for developmental purposes 🤣🍺

[@Retrofitlab]

Hi, could you maybe send us a message on Facebook facebook.com/retrofitlab or via email? Thanks :-)

[@borashid3371]

Be-exnon HID are this 2 inch or 2.5 inch. would 2.5 inch the size is 1.8 cm and width with silver cover are 9 cm. The width class xenon is 5.5 cm. Would this also be suitable for the same Yamaha Raptor 700r lamp light cover as your video?

[@Retrofitlab]

2 inches and it's the biggest that fits

[@loscazadoresdewestsac4815]

I have a raptor 700 2020 will this still work on it ?

[@Retrofitlab]

Not 100% sure because we did not have them here, but the headlights seem to have the same shape, so the kit will probably fit.

[@murattulaev7992]

Good afternoon! Please tell me where you can buy an adapter plate for Yamaha Raptor 700

[@Retrofitlab]

yes, the bracket can be ordered separate here; retrofitlab.com/collections/brackets/products/bracket

[@antonioslife02]

Hi good video. But where u got the crome and the halo lights can you let me the link or shere you boight them

[@vwjd77]

Hey I don't know if it will help you, but I just made my own set of lights for my raptor 700. I would definitely recommend you get the 1.8" or 2" versions of these bi xenon light units, as you will have more room inside of the raptor headlight to make your brackets fit . I used 2.5" ones from eBay and they work really well with H1 Hid bulbs, but it took me ages to fit and make brackets for them. The smaller ones would have been much easier for me to use I think.

[@guanone1]

wots ma name j

[@jiapaguilar2495]

How much did you charge for my honda trx450r 2014 ? Parts and labor

[@jiapaguilar2495]

Retrofitlab ok thanks

[@Spinnahemi345]

Can this be done on raptor 660 ?

[@Retrofitlab]

It seems the 660 has different headlights, so this kit won't work. The headlights are quite small, so we can't say for 100% it can be done,