Yamaha Snowmobile Left in Woods for 8 years! (Will It Start?)

[@JeremyRhydes]

Liking these cheap snowmobile revive/rebuild videos?? Want to see more like this?? Give me a list of some sleds you want me to try to get a hold of. I'm also thinking about giving away one of these sleds to a faithful viewer such as yourself!

[@tonymontana2.037]

A flextrac/Finncat

[@akselakslingen6465]

Ockelbo 300🥰

[@nicholassmith2631]

Mxz 800

[@tooours]

2001 Polaris Edge X

[@jeremy9467]

Keep ‘em coming brother! Don’t forget the annual Santa camping trip!!! 🙌🏼

[@nathanmciver6496]

I think you pointing "out the seat" shows you saved yourself money and your viewers! Excellent!

[@lukeallan3871]

Absolutely love this channel. Miss the carb doctor Valhalla mike. Need to see him again

[@alrossi2573]

Your patience and persistence towards making these old sleds go again is admirable. I’d be throwing tools and cussing non stop 😂 Great job! These videos are awesome!

[@jimmaltese1852]

Dude, seriously his videos are so lame. Why you would support this lame content is beyond me 🤦🤦

[@75superfan]

I bought a Yamaha Viper for $600 before. It had Bender triple pipes and all kinds of aftermarket parts on it. It wouldn't run so I got it cheap. It just needed fresh gas and a carb clean. I love watching you fix these old sleds !!

[@jimmaltese1852]

Dude, seriously his videos are so lame. Why you would support this lame content is beyond me 🤦🤦

[@elan440steve]

Thanks for another great vid!! It's always a good time watching you get a neglected sled running.

[@gordonliddy9418]

I used compressed air and held a shop towel around the filler neck and watched the fuel go into the tubes on the carbs for the 97 vmax 600 I just picked up. Worked really well.

[@Gabbrrys]

Loving these videos , can wait to see you get them out and ripping and hit some ditches !!

[@itsAceR80]

I love these kinds of videos! You should try to find an old zrt triple. Although I think you should keep making content with this machine. It’s super cool!

[@jimmaltese1852]

Dude, seriously his videos are so lame. Why you would support this lame content is beyond me 🤦🤦

[@Gizmos_and_stuff]

just got my first machine for free that hasn't ran in 10 years and has been under a tarp, hope i can get it running! carb was PERFECTLY clean by some miracle

[@carmie2431]

steve rowell: awesome job, jeremy! You are quite the mechanic. Interesting to see how you fix all these machines. Enjoy watching your channel.

[@rageridersrx]

They yamaha pro action sleds were great sleds I've owned 13 so far and always looking for more

[@bwyyy7306]

I enjoy them, sadly in Ontario (Canada) a $300 sled would probably get you a piece of the hood

[@cmrepair8720]

Throw the bushing in the fire get it cherry red and punch the bolt out done it multiple times

[@MidnightPolaris800]

This!!

[@HazrdHazrd]

Hunter at Als comin in clutch with the trailing arm 🔥🔥

[@MidnightPolaris800]

Any polaris xc sleds are awesome. Every brand is great except skidoo. I get pumped everytime i see a sled upload from you man

[@jimmaltese1852]

Dude, seriously his videos are so lame. Why you would support this lame content is beyond me 🤦🤦

[@jacobstavish157]

I love the old sled videos!

[@jimmaltese1852]

Dude, seriously his videos are so lame. Why you would support this lame content is beyond me 🤦🤦

[@eugenebaroni1298]

Great job 👍 WOW those old sled videos are awesome 👍👍

[@jimmaltese1852]

Dude, seriously his videos are so lame. Why you would support this lame content is beyond me 🤦🤦

[@davidnoyes9115]

Love these sleds, my son and I have 2,

[@steveutgaard9961]

Awesome video keep up the good work Job Congratulations merry Christmas

[@caseymuzio7609]

Just gonna say that's a cool raider in the background

[@IowaBudgetRCBashers]

My brother just restored a 2000 phazer 500. Basically the same sled except tge vmax is liquid cooled. These things ride great

[@kinazz19]

I had a 600 and I loved that sled

[@johntomasso3912]

GREAT VIDEO! Let’s see what it does out in the woods!!!

[@mikeh4960]

Awesome as usual keep them coming dude ,great to see you casting some vids!!

[@onemuskynut]

Wow good deal. And great job getting it up and going. I found a 97 Yamaha Ventura 600 that is sitting for a long time very dirty and engine will pop on gas poured into plugs so hopefully if I get it I can get it up and going once it’s cleaned up it’s gonna look great as it’s in great shape minus the dirt. I will need a new track and belt and fuel system cleaned out

[@jimmaltese1852]

Dude, seriously his videos are so lame. Why you would support this lame content is beyond me 🤦🤦

[@Rockcal11]

Loving your vids .. keep it up man also love Olight flashlights too nice !

[@backcountrybuilds]

Love me a good ole Vmax. Resurrected a 600 twin last year. Merry Christmas to you and your family, man!

[@RidingHisunLife]

You should grab yourself one of them ol’greasy triples. Classic XLT would be sweet man. Videos are great keep them coming

[@coreyweese2232]

Triples! I just bought a viper for 600.00 been sitting since 2010.

[@gunnarpedersen5314]

I have watched every one of your videos!! I would love to see you get a 97-99 MXZ 670!

[@davidkurtz3971]

I've been a sub for a while. Love ur videos. Keep making more old sled videos

[@MrChunkstyle]

I got my self a 91 ext 550 that say for years that I got running. Still tinkering with it, getting it fine tuned

[@SwankyCatProductions]

Awesome video Jeremy, really stepped up the videography and editing. I hope things are going well for you and I'm looking forward to more. Might even motivate me to buy a sled again 😆

[@EDOD1144]

Beauty find. Might want to check that exhaust as well. There has to be a nest in there.

[@1972mercurycougar]

Jeremy, This would be a really good sled to restore, at least enough so it's a good reliable and comfortable.

[@GearheadRob319]

I just picked up a 1994 ski doo stx 583 for $400. of coarse i had to do quite abit of work on it to. But the deals are out there. Just gotta keep your eyes open.

[@PoppaMark]

Dude, buy a torch! Save yourself some effort! Keep on doing what you're doing. Love the video!

[@snowmobile_pics_from_canad8681]

would love to c an old edge get revived, as always love the vids!!!

[@collinbibeau1339]

Keep up the good work any scorpion sled would be cool to see on the channel

[@BCJ371]

Fun video. You should put some grease on those ski bolts too to prevent them seizing again

[@shawngleason1345]

The sleeve in the ski it's primary purpose is to keep the ends from collapsing inward when you tighten the bolt

[@mikeytimms9452]

Thank good ur back I've been missing ur videos bro

[@Thairang74]

You should get a ultrasonic cleanier so you can clean carburettors and other parts

[@loganbeaman6646]

I really enjoy theise vids

[@phoenixarizona8441]

Awesome sled i have a Yamaha Raptor 660r Yamaha vmax600 a Polaris trail boss 325 Yamaha exciter II 570

[@douggrant981]

Great Video! Any advice on a 90 Arctic cat prowler 440 that bogs down once weight is on it...worked good for a while after carbs were cleaned then has trouble going up hills. Clutch was checked and seems to grab at the right time. I'm stumped!

[@clayspeaks1382]

Speaking of the viking himself..where has Mike been?? I'd figure he'd be all over your recent vids

[@tomchalette1509]

A little bit of heat and a light impact will do wonders. Good looking slide though not bad ..

[@nilochoye]

so stoked to see a new video

[@RandDCustoms2]

I have a 97 SX 600R that is mint! I want to sell it. It has a Camoplast Predator track 1 1/4" and Plastic Yamaha ski upgrade. Runs great about 4k miles. Rode it last year.

[@braden165ks9]

I bought a 1997 Yamaha mountain max 700 triple for $500 it ran very well All it needed was a carb clean and it had a title

[@Cody_Gray]

You should pressurize the tank with some air. This will push gas out of the tank and prime the carburetors.

[@bluntmedia399]

not sure if this is well known or not but when im dealing with rusted bolts i get it as hot as possible then spray with penetrant right after, rinse and repeat two or three times and it usually does the trick

[@hodgebone1]

picked up a 98 vmax xtc 700 for $325 with 2500 miles on it. only thing wrong was tors sensor kicking in. loostened the throttle cable and have been riding it for 4 years now

[@crewelder3170]

Do you have a Ford ranger or have you had one in the past

[@valhallaawaits6889]

How about a late 90s Mach Z?

[@pasta8712]

I trick that I learned this year is when the gas lines are dry and you put gas in. Put a rag around where you put it in and poke a hole in the rag with the air compressor then watch it push the gas

[@Lord_Moose]

That's a 98, 99s are silver and have the newer gauge cluster with the gas gauge on the dashboard. well the 98 Vmax 500 XT is black and red with the older style gauge cluster and an in-tank gas gauge, I have first-hand experience with this sled because my primary sled is a like Factory new Vmax 500 XT.

[@petertuckergoettler5720]

Cool, merci.

[@r1tsa]

Please get a yamaha triple 🙏

[@zakhope6755]

I own one of them and There great sleds

[@masonwells8025]

I was looking at buying that sled haha

[@muzicmon101]

It’s time for a sled dolly don’t you think? Haha I had a Vmax identical to that it would do a solid 115 across lake Bomoseen

[@lauracallen7428]

These videos are amazing + try and find a not running ski doo 550f year 2008

[@jonanderson5147]

Good video. I’d like to see a Polaris XLT 600 triple or an ultra if you can find one.

[@derickashby8294]

My dad gave a 500 vmax, fun rig, just bought me a 99 phazer 500 with 700 miles on it, id like to see this this restored

[@seanstevens1483]

Love these videos

[@Hollands-ef7rn]

Great job fixing this sled, gotta keep the old reliables ones alive. But please invest in an impact gun, it’s stressful watching someone use a ratchet for everything😂

[@dereksmith8864]

Have the same sled mines a 95 tho it's a tank it rips with a adjustable 600 clutch

[@larrywarner9314]

Yeah great sleds woooow 😳

[@andystrains4335]

I have an 03 viper like you have it ran ok for a bit but it bogged and backfired now it won’t go

[@projectdirtbikes]

Good stuff!

[@Mnoel79]

what was leaking from the engine at the end ?

[@paxtonzupancich7726]

Hey mike how much do you what for that black and blue Indy 500 will you sell

[@sspeedy2859]

Looks like your trucks dash is lit up, hows it running there bud?

[@Huliganenswe]

Damn u got some cheap sleds 🙈 they are so expensive here 😅

[@nickdaigle]

i love the old vmax's!

[@joecomstock7255]

I have one of those in a 600 with viper Suspension

[@martyfield694]

You need to invest in a Ultrasonic cleaner and save yourself some grief. Save some $$ on carb cleaner as well. Hope you get good snow, a little more riding content. I'd like to see an older Ski Doo Blizzard revive, '77-'83 vintage. I had a '79 7500 with the 340 LC. Pretty fun for 70's era sleds. 2 stroke rotary valve Rotax power baby!!

[@staggerinstanton56]

It's a Yamaha of course it will run

[@96Duelfuel]

I would've put some mixed gas down the plugs holes right from the get go...

[@Just-InTimeRepairs]

It looked like that trailing arm had been sitting on the ocean floor since 1792, when Columbus sailed the ocean blue.

[@robinmuric6304]

If you use combustion chamber cleaner to clean your carbs; you will be shocked how fast and clean they turn out.

[@justinholzer9515]

IVE GOT A 99 VMAX 600 GREAT MACHINE

[@israelrios7612]

I wish i was lucky enough to win one of these just because I love your videos. I was actually just wondering what you do with all of the sleds you fix

[@PowerlineRider]

Hell yea! Smokin deal!

[@MrHenry1530]

Are you selling any of these machines

[@setburhed4987]

Nice bro

[@ryansteve8739]

We need an rx1 update video!

[@mike.4277]

That's awesome 😎😎

[@ashtonmayou1041]

When coming out with riding vids

[@davidcorder95]

My brother has an snowmobile about that age someday I would like to find an skidoo mxz

[@thomaskennen3470]

That mouse piss really corrodes the aluminum.

[@joshkoltes]

You can get.replacement buttons at ace

[@jerrythomes4337]

Is that 96 mxz for sale don't even care if it runs?

[@jordanotto2611]

I love these videos man but I ain't going to lie that's a little bit too small of a bolt

[@vernblohm7420]

Nice!

[@brianlongley3309]

Brother lets do a rode in tjis year with Vahala Mike and traveling man please live in Vermont

[@joshsutton9854]

Where you from