Yamaha TF Series: Live Recording with Yamaha TF Series and Nuendo Live

[@davonwav]

Best system I've seen yet especially for the cost. Yamaha has done moving faders for 20+ years. My Aw4416 still runs fine after 14 years. TF1 looks much easier as well. Really sweet top shelf gear!

[@ДэвидДанильчук]

hello from Russia) I really love your products, especially mixers!

[@Zazquatch1]

And if I want to use Logic X ?

[@pro_influence]

Thanks for sharing this, I have been trying to get through this.

[@PeterT435]

Could I use a mixer that has Usb port with any type of Daw for live recording?

[@nunovazquez2535]

It would be nice the same support video for the ones that got Cubase AL with the purchase of the TF mixers in the beggining.

[@luizronconi]

And About Pro tools? Is it possible using it?

[@ottaviociacchella4227]

hi, I work tomorrow with a TF1, I wanted to know if I can use adobe audition to record in multi track?

[@GoldenFractal]

Can it be set up for Multitrack recording using Pro Tools or Logic Pro X?

[@sethlael]

probably. works on ableton just use a short USB 5'< cable.

[@robburgess4556]

The question I have is why can you only record 34 channels? if you're trying to do a virtual sound check and you have inputs via Dante then you're screwed. Is it because the recording is done through USB? Can you record ethernet through the Dante card and get every channel?

[@randallpatrickc]

Can I import the Nuendo files into Logic or Live?

[@therealfaithministry3076]

How to mix the multitack again on the board?

[@alexfr811]

Nice... Is it possible to use Ableton too? Thx

[@chryspalmares3955]

Hello, for all who are asking for their free DAW software, my TF5 came with a Cubase AI 8. The Product Key and Liscence is on a piece of cardboard paper inside the box.

[@hermanbsm7398]

Hallo.. what version TF that ?

[@tirimanlinojnr7555]

Does this apply to any software apart from Nuendo lIve?

[@johnleclerc5711]

How do you control input volumes?

[@SebastianGegusch]

If I implement this setup in this way, the stereo sum is always recorded on channels 1 and 2. Can this be switched off so that channel 1 records input 1 and channel 2 records input 2?

[@joeybaronstudio]

Also does n live have track versions?

[@mahijeestudio]

hello sir can i i record tf3 mixex in cubase Le.

[@ValentBesley]

Hi, you mentioned that nuendo live comes with purchase of yamaha tf, i own yamaha tf but I didn't get one.. can you or your team help me? Thanks

[@PeejaiiOanes]

The same experience here. What it had was only the Cubase Elements AI.

[@PollynzDataTech]

Hi I have TF5 they told me the same thing, I didn't have it but I contacted Yamaha and they only ask me to provide proof of receipt and that is all I did and they sent Nuendo life to me free.

[@yoni_gt]

@@PollynzDataTechhow did you contact Yamaha?

[@samuelnababan385]

Please help. I just use the TF3. The problem I got in usb driver is I can't use the driver in DAW and livestream app at the same time. Compared to Behringer XR18, i can use the driver in 2 apps at the same time.

[@7874587823]

Hi. Seeing your video I have a question.... In mi console (yamaha tf1) my channels 1 and 2 has the same signal than the main out.

[@7874587823]

Why is it ?

[@joeybaronstudio]

Can you play tracks while recording?

[@matheusPMAVieira]

Where do I get in contact with you? There is no answer on instagram. I'd like to know if I can use TF usb interface as an audio input on my stream PC

[@miltonyjainies]

I own a Yamaha TF 5 and I do not have Nuendo. how do I acquire it?

[@mattrogers6522]

contact yamaha?

[@hermanbsm7398]

Good Morning Mister.. I'm from Indonesia How Upgrade digital Console Yamaha Tf 3 ? Thanks Mister..

[@jacqueskorb879]

Thank you

[@Wagoo]

When is my CS-80 reissue being released? Cheers!

[@albertomariocastellanos1722]

Hola se Puede Sincronizar esta Consola con cualquier Daw ya sea Con Pro Tools , Ableton Live, o Studio Once..?...o nada mas se puede sincronizar con este Software.? Gracias

[@kokeman3557]

Can't install nuendo live on mac computer Sierra 10.12.6, need help please

[@alimanshur]

hi... i own yamaha TF and nuendo live but i have a problem on my mac mini when i running nuendo live, the asio drive is detect yamaha tf but on the state, asio drive isnt running so i can't record. please help me. thanks...

[@david04-i9]

could you solve it? i'm having the same issue here. No idea what to do

[@mr.brettjames]

As @Yamaha Global don’t seem to respond to anyone’s questions - Is anyone else having issues when playing back a recorded session? I recorded a gig using the TF1 and Nuendo and now trying to play it back using the method described in this video but I keep getting cracks, pops, and dropouts !! Very frustrating.

[@PollynzDataTech]

Hi I have tried all the steps you showed, everything works but I cannot play the sound from my TF. Please what could be the issue?

[@greenrelaxing991]

in tf editor windows rta can't display this very important to detriment where we cut and boost freq in peq

[@jimiheil8007]

Will it work as a control surface for Pro tools 10/11?

[@UmerFarooq-nq4du]

Who is best iPad with Yamaha tf mixer?

[@yoni_gt]

Probably most of the iPad For us we use iPad mini 1

[@pauloyoshizaki2103]

YAMAHA :T.F. SERIES : Aplicatiom Yamaha : Parameter :Equalizador - Gráficos : Arpeggios : Control Som Digitais : Wireless iPad Conecção : Control .............…..

[@silentghost82]

Doest it works with protools11?

[@luizronconi]

Same question!

[@aungmyo1812]

Hi. I own Yamaha TF3 i don’t Know How to conet with cubase 9 can you help me. Thank

[@greenrelaxing991]

maybe the aplication tf editor need to rebuild to display rta in peq display

[@nkurumusic7891]

I 'm gonna use it tomorrow for the fist time, my come true and I just to thanks for the Good products

[@saulsaenz4404]

hola tengo una tf5 y no pude enlazar con nuendo 6.. me ayudas por favor

[@miltonyjainies]

Also, as I do not have Nuendo, I have been trying to record on Logic. I can see that my Mac, reads the TF5 but for some reason the only track that shows on Logic is channel 1, the rest of the instruments and voices do not show. If the entire band is playing and (the piano) channel 1 is not, Logic won't show anything. I am connecting it thru the usb to host.

[@Praveenpresonus]

How to shutdown this mixer

[@yoni_gt]

At the back

[@jespernorgosanow3114]

Horrible mixer