Installing the throttle screw from the GYTR Competition Kit and the GYTR exhaust baffle.
Пікірлер: 61
@Linkavitch7887 жыл бұрын
Just finished my upgrade. Swapping out the throttle screw took about 15 min. Looking at the directions, there is no mention of needing a T-25 SECURITY Torx but but it is DEFINITELY needed. ECU took less than 5 min. I did take the header off and it gave me enough extra space to work easier. While I was at it, I put on a FMF Q4 exhaust which took more time to mount than the throttle screw replacement. Thanks again for the video!!!!
@azdesertdog7 жыл бұрын
These are "must do" for these bikes. I love the tuner. I can even pack it and make changes on the trail.
@Georgia4Low8 жыл бұрын
Very Nice... I bought the GYTR kit for my 08 model. Came with smog removal items, jets, and throttle stop. I did the gray wire mod and baffle. Best thing I did was put on a GYTR silencer and ditched the OEM unit.
@azdesertdog8 жыл бұрын
+Dirt Hammers Hopefully down the road I will do the exhaust. If the GYTR is still available. It sounds like the best option since it is tuned for the bike.
@ArizonaRE8 жыл бұрын
Nicely done! Pretty smart mods, getting the most out of the bike B-)
@azdesertdog8 жыл бұрын
+Arizona RE I can't wait to start the suspension.
@JD-yq7qi8 жыл бұрын
Very Nice this Wr 450F!!!! I love it :D
@azdesertdog8 жыл бұрын
Thanks! Its a fun bike.
@chrisenduroadv14058 жыл бұрын
Wow, now she sounds like my KLX 330... nice Vid Thanks
@azdesertdog8 жыл бұрын
+Chris MotoBikingAtThisUnivers Hah! I wish. Your 330 sounds awesome.
@chrisenduroadv14058 жыл бұрын
+azdesertdog Nooo, I only have a good extra Mic for the exhaust ;)
@jameszappetta81647 жыл бұрын
It works for a 2015 wr250ff i just installed the baffle on my wr The Yamaha Part Number is GYT-5TJ93-75-01.it says it is for a 450 but is also fits the 250 perfect
@azdesertdog7 жыл бұрын
Thanks for the input James. Hopefully it will help someone in the future.
@BrianWest588 жыл бұрын
Gonna be a proper hooligan bike on the trail 8-)
@azdesertdog8 жыл бұрын
+BrianWest58 OH! Yeah!
@crjdirt8 жыл бұрын
Best mod - scratches
@azdesertdog8 жыл бұрын
+crj dirt (crjdirt) Word brotha!
@nathankroon90227 жыл бұрын
I have watch this video several time and I am ready to install my ECU and throttlestop. I was just curious if you replaced any of the exhaust gaskets when you remove your header?
@azdesertdog7 жыл бұрын
Thanks for checking my video out Nathan. Reused the stock gasket. For the little bit of money it wouldn't hurt to have one on hand. If you don't use it you'll have it for when you change out the exhaust system, if you plan to do that. Good luck.
@scottburdette94438 жыл бұрын
Been enjoying your videos! I have a 2014 wr450f - changed out the ecu and switched out exhaust for slip on big gun. When I changed out the exhaust had to go to a Wiseco FMC because bike was choking out. Previous owner took out throttle stop so added the one that came packed with the gytr ecu. Just curious you mentioned something about the exhaust baffle you switched out still meeting Forrest division regulations, do they monitor that out in AZ for off roading? In TN here at Windrock they could care less how loud things get. Keep them coming, ever get over to TN we have 300 miles of trails at Windrock I can show you.
@azdesertdog8 жыл бұрын
+Scott Burdette Thank you Scott! That Wiseco controller sounds pretty good. The the exhaust baffle comment was more about keeping the spark arrestor. The NFS/BLM and G&F stop us to check the arrestor. We have pretty bad wild fires here. Sound is secondary. Exhaust replcement is a little way down the list. Suspension will be first. Thanks for the invite. I miss riding back east.
@scottburdette94438 жыл бұрын
+azdesertdog ah, makes sense now. I didn't even put in the spark arrestor in my big gun, sitting n my garage right now....so my exhaust is wide open, sounds awesome. We have 2 places to ride, Windrock can be hilly with tons of rock, the other Royal Blue you are slopping around in a hilly mud pit..looks like your trails are relatively flat with some rock, a welcome site!
@AZ-Patriot8 жыл бұрын
I was going to ask if it was running lean. Thought it sounded like it was stumbling a little bit down low when you started it after doing the baffle swap. Also, while you're out there running around in the desert, grab me some of that Desert Ironwood. Stuff makes fantastic knife scales. I have 5 of them in my yard but they're all still too young to start coppicing.
@azdesertdog8 жыл бұрын
+AZ Patriot I'll keep an eye out. I always thought ironwood would make great pistol grips. This bike is super lean with the stock ECU in. So the baffle made it worse. I knew that but I wanted to see the improvement the "Competition" ECU would make. BIG difference starts much easier too.
@TZMoto7 жыл бұрын
Video was really helpful. I need to remove my throttle screw on my 16' do you know how similar your year and mine would be?
@azdesertdog7 жыл бұрын
Thank you for watching. The 16's are much different. In 16 they went to the reversed motor configuration.
@SquidWithGear8 жыл бұрын
wow it was waayyyy easier to get to the throttle stop on my steel frame carbed wr. also I just took the baffle+spark arrestor out and tossed em lol
@azdesertdog8 жыл бұрын
+Squid WithGear Yah I am sure. This series of WR has the YZ 250 frame. Unless you have little girl hands it is pretty tough going.
@kennoy16547 жыл бұрын
Do you have a part number or an exact description of that bigger baffle or the exhaust tip?
@azdesertdog7 жыл бұрын
The Yamaha Part Number is GYT-5TJ93-75-01.
@philip87884 жыл бұрын
I have been trying to find the GYTR baffle in your video on the Yamaha website. I can't find it. Can you send me a link so I can buy it?
@azdesertdog4 жыл бұрын
I bought it at a dealership years ago. The GYTR stuff for these models is getting pretty scarce.
@navythomas88 жыл бұрын
Ahh okie now I see what your doing.
@azdesertdog8 жыл бұрын
+navythomas8 Hah! yup these are backwards watching them in the feed.
@kylerupe37328 жыл бұрын
Where did you get that baffle at
@azdesertdog8 жыл бұрын
I bought it on Amazon. The vendor no longer has them there. It is an official Yamaha GYTR part. If you go on the Yamaha site you can order one there.
@bluegram13898 жыл бұрын
I like the videos when you do the changes but find when you are on camera you are heard to hear .
@azdesertdog8 жыл бұрын
+BlueGram 13 Yup. One of these days I need to get a decent camera for this kind of stuff. Thanks!
@bluegram13898 жыл бұрын
I still like to watch you and enjoy what you do.
@RacerRed8 жыл бұрын
1:34 Your thumb isn't supposed to do that o.0That WR is sounding nice! This video reminds me of why I want to move to Arizona. Sorry to hear you went down. I can see by your visor that it protected your head, though.
@azdesertdog8 жыл бұрын
+RacerRed This first one I face planted pretty good on the camera side. Thought I lost the camera. Luckily it just spun in the mount. I would have to have a very good reason to leave AZ.
@TRX450RVlogger8 жыл бұрын
Sounds damn good! and haha Kitten Farts LOL
@azdesertdog8 жыл бұрын
+TRX Vlogger I hate quiet bikes. They don't need to be super load but I like to hear them.
@TRX450RVlogger8 жыл бұрын
Same here man.
@cooldude_gaming7288 жыл бұрын
Where did you get that baffle
@azdesertdog8 жыл бұрын
You can get it direct from the Yamaha website. It is in the GYTR accessories for the WR.
@cooldude_gaming7288 жыл бұрын
ok thanks because i was thinking about getting one and was trying to find out how to make it sound more like a yz450f
@azdesertdog8 жыл бұрын
Truthfully. Save the $50 and get a LEXX exhaust for $199 on Rockymontainmc.com You'll end up doing it anyway. Plus you'll have the stock for noise restricted areas. IMHO
@cooldude_gaming7288 жыл бұрын
ok and do you have to mess with the jetting when you change it
@azdesertdog8 жыл бұрын
The 2012 thru 2015 WR's are fuel injected. As long as they have the Programmable ECU no mods needed. A carbonated model @011 and earlier shouldn't need jetting with just a slip on. But that would depend on elevation and any other mods that have been made.
@rwcasto3 жыл бұрын
looks like Arizona
@azdesertdog3 жыл бұрын
It sure is Rick. Thanks for watching.
@stubabyfuora5280 Жыл бұрын
Other ecu is ticket
@azdesertdog Жыл бұрын
Yup. That's was the next video. Game changer.
@Dramadelta3 жыл бұрын
Oh there's a reason why everything is like that,at wrf it's not yzf,you can go easy low rpm for a coffee pa;)its also the reason you have licence okay?plus I have both of them & to be honest YZF you dont pay nothing wrf you pay here Europe 150€+50& (another 50 every two years) & those are if you move it or not;)42 years old 30 years motocross I learn something those years, you know?those last 30 years almost 1 life.I'm something between gasoline & oil ;)
@azdesertdog3 жыл бұрын
Thanks for watching! These were the first modifications to the bike a few years ago. In the states these are off road only bikes. A couple stated let you register them. Since them I have done an exhaust, GYTR tune able ECU and a bunch of other stuff. I'm 54 and been riding for 44 years. This is a great bike for the mix of riding that I do. Desert, forest, single track etc. 😎👍
@Dramadelta3 жыл бұрын
You need new exhaust 100%
@azdesertdog3 жыл бұрын
Yup. This video is 4 years old. I have the FMF GYTR exhaust. Works great not too loud. 👍