NEW Chinese 1000cc V4 Superbike! (CFMoto)

[@yammienoob]

Check out ASV for the best levers out there! Head to asvinventions.com/?aff=yammie and use the code "yammie" for 15% off!

[@vlad1529]

🍦

[@King-overkill]

🍦

[@lukebarnsley6710]

🍦

[@gavinmccubbin7958]

🍦

[@nickchervenka9391]

🍦, I know you're probably not going to see this, but I work for a dealership out of Percival VA, we have a KTM RC8C in our show room, it was the first of 100 off the line if you wanted to come through and get it.

[@flatbread7685]

Imo more competition between manufacturers are pretty much always better for us consumers. new tech , competitive pricing

[@carlosvejar3938]

Well said

[@Zander10102]

I just hope it's real competition and not puppet companies.

[@bannedtwice7767]

Absolutely.

[@joeblow5037]

especially if you pay your employees $10 a day 🤔

[@JustinsGarage]

Agreed

[@RenshoYT]

CFMoto is probably the brand I am most interested in watching the development of currently, despite the fact that I definitely shared the same stigma toward chinese motorcycles in the past. Their current lineup is genuinely good (reliability still needs time to see how it shakes out, but initial quality is at least really impressive), and the pricing is just untouchable for the features. They may still be a relatively small player right now, but give it 5 or so years and the other manufacturers wont be able to ignore them. Like it or not, Chinese manufacturing of both motorcycles and cars is here and its not going anywhere. All we can hope for is that the resulting products are good. Its important to remember, countries don't make products. People do. I don't like the actions or stances of the Chinese government, but that doesn't mean the average citizen can't be a genuinely passionate enthusiast just like any of us.

[@tsubadaikhan6332]

The Chinese don't allow Vehicle Manufacturers into their market unless they make product there - With a 50/50 Chinese Partner. We've taught them everything we know. There's no reason why they should be worse than anything from Detroit. And General Motors got greedy after US Taxpayers bailed them out, and sold their Chinese Partner 1 more share, making it a 49/51 Partnership. General Motors is now just SAIC's US Retail wing. All their R&D is done in China.

[@dancinglizard3080]

W take

[@CorBor69]

W take

[@ciaranmccabe3225]

Their reliability is good because some of their bike use ktm engines

[@connor3288]

Funny the people saying they won't buy chinese products because of the ccp, as if all profits went to them. These same people seem to have no issue buying a bmw or jap bike, and both countries killed many innocent people, and some of their grandfathers in ww2! And almost all products sold today likely have some chinese made parts.

[@kinangeagle133]

I 100% expect that CFmoto will eventually get up to big 4 priced and not the other way around cause good things will never last. Remember that

[@hexadecimal1517]

Will increase in price for sure, but I doubt it would be as expensive as the big 4. They still pump out bikes at a higher volume than their competitors even for today's standards.

[@wajalama]

Honestly, as a long time rider of Hondas, they deserve it. I got fed up with their shit when "inventory issues" were happening for years and let the dealerships mark up bikes to disgusting prices. Not to mention how we always got fed the leftover scraps while the rest of the world got updated bikes. I mean like seriously, their "2023" CBR600RR is still using the same dash from over a decade ago, what the fuck...

[@gabrielrojas2781]

Agree

[@coastalhillbilly3419]

Kia and Hyundai probably have high-line and EV autos pushing 6 figures

[@MukiMuki688]

@@wajalama It shows conflicting images on google, some show the digi-dash, some show the analog-dash for 2023 600rr, not sure which is the right image.

[@jackjewell6926]

Let me just say I recently lowsided my 2023 KTM 790 Duke (CF MOTO BUILT) at about 60 mph. And the bike held up really well, no snapped welds or fractured ally. If it wasn't for a bent front wheel I could've ridden home. I've done 5k miles on it already and no issue to speak of. Very impressed.

[@ordinarypablo]

Ok John xina

[@ritwik0]

A bike rammed into my Husky's(Made in India) radiator at 50+kmph, just the guard fell off which I picked up and put on back. Another time a bike rear-ended perpendicularly nothing damaged. See if 5 ppl who had problems would post here then everyone will think there's a problem with KTM's QA but 5 will post positively people will ignore.

[@amizumori3]

I have 18k miles on my 790, and only issue was a very small coolant leak

[@Nick-Edwards]

I bought the 700 clx sport about a month ago and I am absolutely in love with it. It was a zero mile 2022 model so I got some money off msrp and didn’t have to pay the dumb transport fee. Walked out the door with it for $6300.

[@RT22-pb2pp]

5 k I had 60k in 5 yrs on original ninja 600 never had 1 not 1 part fail show me cfmoto that has happened on I will buy in

[@Nate-hf2hs]

as a chinese i feel really happy that a chinese motorcycle brand is getting more reputation, and the new cfmoto clc450 cruiser is coming out this year, so I really cant wait XD

[@AngelosMotoCycle]

Yes yes and yes on CF Moto. I’ve bought three CFMOTO’s for about the same amount I paid for my 22 ZX10R and I am loving them.

[@jw8767]

So many good words for CF Moto. Another Chinese motorcycle brand Kove is also rising, their recently-relase 450cc-sports bike is quite comaprable with the Kawasaki Zx-4RR (performance & quality)

[@kinangeagle133]

The only reason to hate CFmoto upfront is the fact that it doesn’t carry prestige with the badge yet. It’s more satisfying though to support the underdog and and still be there when they take over

[@chestermarigza4917]

I already own a CFMoto 800 NK. Wow is that Beast a riot! No complaints yet and everything seems to be getting smoother every change oil! I know that it's early to judge but I am beyond satisfactory level at the moment! Thanks for the video Yammie! Love from the Philippines!

[@rishisaini8334]

Fun fact - The Kawasaki 650 parallel twin is also manufactured by CF Moto. It's the same engine used in CF Moto's 650 line up and the Moto Morini XCape 650. Thank me later

[@chrispekel5709]

Everyone knows this dude

[@vaporwave4207]

@@chrispekel5709I didn’t know that

[@kuroneko-_5570]

@@chrispekel5709dude wtf not all knows this

[@williamdavis4809]

That is false

[@ritwik0]

Lol. Where's did you find this fake info? Bing?

[@Dragoninja833]

I have a 700 clx and everyone that knows it, stops to talk to me about it. Everyone just seems to be curious and they seem to like it. I love it. Its a sick bike for $6,500!

[@switcherlp780]

Yes, please more CFMOTO content. The bikes are quality, fun, and fill the gap left between the gentleman's agreements among the Japanese brands. Bring to me the 800NK. I am ready.

[@Damons450ss]

I still love my 450ss after having for for over 5k miles in 3 months! Absolutely insane!!!

[@solidXsnake4life]

I consider buying one myself. What is your opinion now, nearly a year later ?

[@stewwey4059]

​@@solidXsnake4lifeBut big brands like yoshimura exhaust have an after market exhaust for 450ss doesn't really sound good in my own opinion but it's good because it improves performance and trusted brand you can also buy Vandemon full system exhaust dual exhaust for cfmoto 450ss around $1200 USD no tune required as long as you have the db killer/silencer 100db w db killer / 104 without db killer

[@cbiser12]

I want a 450SS so bad, but it just wasn't the year. I'll end up getting one in the next couple of years probably. They just look, feel, and sound so damn nice.

[@BigBossBoy25]

Just got mine a month ago and I love it

[@TGChauuncyy]

IFeel You G, If I Had A Garage ToPark That Vad Voy In, Ouuh Id Ve Rippin So Hard Rn

[@jacksons87]

the new gen is single sided swing arm. so youll love it even more

[@chestermarigza4917]

Who knows, you might end up with the 800NK. Just like me, the 800 NK

[@cs1375]

​@@TGChauuncyythat's an excuse. Buy it and bring it in the house.

[@carlanthonyholmes2162]

Still riding my Benelli tnt 2016 model 5 days a week, 60 km per day. Still going good , 60 thousand in now.

[@LadyWhiteRabbit]

Appreciate the info. I've been looking into the 450 since the ninja 400 can't seem to ever be available in AZ with abs. CFmoto is winning for me.

[@tonunknown1]

Got mine last month, love it so far, already put 2k miles on it.

[@ProdicalMan]

Excellent choice in bikes

[@MLKM4N]

I've never had abs. Riding motocross to street bikes. Never had a problem. Just ease into the breaking it's not hard to get used to

[@BikeLifeL]

I used the x350 in my MSF course; it's actually a really good bike with little vibration compared to most Harleys

[@k1wi_steve]

Currently own an mt10, had it for about 3 years now, love it to bits, the sound, the character, the handling, overall magnificent bike. But when the 450sr got released in Australia I had to take one for a test ride. When I got off of it I had the biggest smile I've had in years of riding, it was the most fun I've had riding in years. It handles great, looks awesome and sounds fucking amazing for a stock exhaust. My wife has a ninja 400, I occasionally ride it from time to time, it's a solid bike, but the 450sr is so much better in every regard. I can't talk about reliability as I havnt had one for an extended time period, but if they tick that box, the big 4 need to check themselves. Good competition is needed to keep the market in check and balanced. I for one would love to see a 1000cc from cf moto.

[@RT22-pb2pp]

reliability is all they need to prove and they are in the game

[@SinisterShivers]

I’m a mechanic who builds and works on CFMOTO products, from ATVs, SxS, to street bikes they make good products

[@dmotorsports]

i have been loving my 450ss and a cfmoto liter bike would be a sick upgrade in a couple years

[@700clx2]

I love my 700 CL-X. In January 2024 CFMOTO at 51% and Yamaha at 49% announced a partnership to manufacture and sell bikes in China. I can't wait to see what comes next.

[@GranAutizmo]

Well, if KTM won't make a street legal RC890R, and CFmoto comes out with something like the 450ss, but with a Duke 890R engine, I'd 100% buy it.

[@grasshopperkane7749]

Had a 250 2strokexing fu motor cycle and it was a tank! Maybe only did 50 mph but was fun to ride! Was in Shanghai at the time 1989.

[@Murad.bn2]

I have CF Moto 300NK, and given my small experience, I can point out only minor negatives: 1) Handlebar vibration could be a bit less 2) Engine cooling system is weaker than desired (affects only slow speed riding in hot weather, 85 °F), but no overheating 3) Fork rebound is a bit harsher than desired 4) Seat could be a bit softer 5) Speedometer shows ~2 mph more than the real speed Other than that, it seems to be reliable machine (+2 years warranty), well-built, and fully suits me as a beginner bike. Main competition are India-built Yamaha bikes plus Indian brand Bajaj.

[@TheLiamis]

Isn't the +2mph a legal requirement for manufacturing?.

[@Murad.bn2]

@@TheLiamis Not sure. But it is annoying to see at lower speeds, when it makes a difference. We use km/h in Azerbaijan, so it is like 9 on speedo vs 5 real. I had a Japanese car which lied about 1.2 mph , that was tolerable, 2.5 mph is not.

[@TheLiamis]

@@Murad.bn2 I think it's required to prevent people going over the limit. As I always say though the speed limit is the grip on my tyre's.

[@IN_ZANE_]

You bought a budget bike = got what you paid for

[@Murad.bn2]

@@IN_ZANE_ Completely agree. I am generally happy with it, worth the money. As for major brands, we don't have dealers in our small country, so that all those bikes come either used, or for crazy prices (like Z650 2023 for $16300).

[@punxrancid124]

when you talk shit about pooh, not only your Huawei will explode, even your cfmoto explodes

[@yashwanths8472]

Triumph speed 400 has already been launched in India and it costs less than $3600 It really is an awesome bike

[@ritwik0]

Waiting for scrambler 400x to replace my Svartpilen but not a single dealership in 500km radius in NI.

[@ABUSHfan]

Honestly I'm all for Chinese motorcycles. I think the Chinese manufacturing gets a bad rap.. they make everything. Including high end quality stuff. Just cheap us companies wanting to pay bottom dollar that purchase the cheapest stuff.

[@ndautomotive]

I wouldn't mind it at all, if it's at competitive price point.

[@Bruce_bianchi]

It’s competitive because it’s built with slave labor. If you want to support that go ahead…..

[@dagster155]

CFMoto is taking a page from the launch of the Hyundai/Kia automotive twins in the US. Build with quality, provide great pricing and offer a generous warranty...a proven strategy for entering a competitive market. Now we sit and wait to see if they are as good as they appear.

[@JosephStanek-jj3uo]

My friend has had nothing but problems with his KTM 390... he is trading it in on an MT 07.

[@shinababes]

What year is his KTM390?

[@JosephStanek-jj3uo]

@@shinababes 2023

[@drivermobius]

More V4s please!!!!

[@dadandkids5028]

I saw a 650 cfmoto today and the front fork chrome was massively rusted. Must be the Chineseum they make it from. Beware - these things will have zero resale once people work out the quality issues.

[@jonnymac8925]

Lol.they use KYB forks and shocks which are far from chinesium. Also, they are cheap bikes, nobody is buying a cheap bike for resale value, hell nobody buys a bike and thinks of resale value😂. So you either made that up or seen a very poorly maintained bike.

[@phil4986]

Great video. The editing was crazy great. CFMoto should try to get their current bikes moving before dumping billions into upper scale wish bikes. Even the major brands are having to cut back models and consolidate engine types. But it is fun to dream.

[@MrThejunkman]

bought a 2022 650NK for $6K OTD and have loved it. Ridden my friends’ R6 and mt-07, etc. Loved those bikes and yes, they were BETTER but they were also almost 3-4K more OTD and idk if they were thaaaat much better. Part availability is okay but most parts that fit kawasakis for the 650 line up work since they’re pretty similar stuff and the 700 bikes just use KTM stuff so those fit pretty well too

[@dhowting]

An RSV4 for the price of a Ninja 600......YES PLEASE!!! P.S. LEAVE THOSE OH SO SWEET DUAL SC CRT SHORTIES UNDER THE TAIL AS WELL!!! DANG THAT EXHAUST LOOKS SPICY!!!!!!!

[@user-ez9rw5lm5w]

450NK is already on sale. A 675cc three-cylinder motorcycle and a 1000cc V4 will be unveiled soon.

[@katprowler6805]

The low quality 'made in China' trope is a myth that needs to die. As someone who has witnessed very high quality products churned out in Chinese factories, I can unequivocally say that they can make anything that rivals the Japanese, German etc. The low quality trinkets you see in Walmart is a function of cost not country. If you ask a German company to make a $5 gadget you will get a $5 quality.

[@jensenthegreen6780]

its a fun and popular trope too, pretty much socially and morally enforced nowadays, i'll say it first i dont support the working standards and ethics there, as much as i hate inhumane work ethics elsewhere, and so neither the government, people that plays along the trope does it in their one of 75% things that are made in chinese factories.

[@colbygerard]

i work as a cfmoto technician, and trust me. they can build a good machine if they want to, but they dont give a shit and are just dishing these powersport vehicles out for a huge profit, reliability is low and build quality is even lower

[@joeblow5037]

anyone that knows anyone who has commercial dealing with China 'production' knows this my knowledge are oilfield fittings as soon as the USA factory rep leaves the factory, the quality goes to 💩 hence, most oilfield castings/fittings from China are outlawed

[@colbygerard]

thats exactly it, the quality of the casting are very poor and unpolished. such little care has went into the production of the units that bolt holes are RARE if they line up. SOO much stretching and bending trying to get things to line up, and that just the start. service manuals and instructions hardly make sense or have the CORRECT info in the manuals. the problems are never ending... again they are flooding the market with poor quality and just turning a huge profit. long story short YOU PAY FOR WHAT YOU GET, hence the prices are so cheap in comparison to other brands. @@joeblow5037

[@jomunoz]

a KTM engine with chinese manufacturing? Sounds like a formula for reliability 🍦

[@paulhope3401]

That is litterally where KTM is at right now. Engine design and longevity itself is largely very good but let down by hit or miss QC with sub par assembly, typically coolant/oil leaks etc. Some have no problems and won't hear a bad thing said about KTM while others do.... and end up getting pissed off waiting weeks/months for replacement parts which often leads them to switch brands. I suspect a CFMoto branded KTM, if we can call it that?, would likely be a similar ownership prospect.

[@anthonytenaglia3473]

🍦 not many we can trust I see…….

[@chikamazri5817]

KOVE just launched 450RR this year which is faster than zx-4rr, Cfmoto is currently making a 100hp 675cc three-cylinder engine, it will to the market in a year or two And Zotes too is making a 600-700cc three-cylinder engine Things are getting really exciting lately

[@jeffx9550]

There we are

[@FredDaviesCOM]

Thanks for the humor Yammie! I dig your Harley dude with an eye for his sister!!! Too cool! Thanks Again Yammie

[@mikes_channel]

Are we ever gonna see a 450SS track test?

[@Forsaken_Outlaw]

My father in-law purchased a new CFmoto 600cc atv & it has performed well over rough terrain. $6k U.S. new was a big factor when considering a new ATV.

[@thanhiclez]

CFMoto pricing in the US makes it a little harder to pick if a CLX700 is 7k and a MT07 is 8k... But here in Australia, the price mark is tempting, the CLX700 is $8,500 whereas the MT07 is $14,500. I'm stuck between buying a Suzuki SV650 at $11k or a CLX700. My head tells me to get the SV, but my heart based on the styling and features is considering a CLX700.

[@Ephem13]

My CL-X 700 Heritage was $6,400 out the door here in the US. Granted, I bought the 2022 instead of the 2023. The cheapest MT-07 I could find online (excluding Facebook) was a new 2023 for $6,900 before tax, title, registration, and dealer fees. It would also require me to drive over 400km to pick it up.

[@christossakelariou]

Clx700 sports are $4000 at dealers by me

[@paulnolan6866]

​@rileyrat13 400km is like 2 hours riding..?

[@xpnuggetbear]

I see what you did there- several times, and nice seed planted at the end. They will get it soon! 😊

[@canadiangaming2730]

I bought a svapillan cuz of you

[@HasdaRocks]

Don't blame him now.

[@canadiangaming2730]

I’m loving it

[@9r3mlingaming]

Well when some of the bikes are actually engines from other manufacturers then i dont see them taking over. Smart good choice for newbies who have an interest in bikes

[@MahendraSingh-ry4zd]

Welcome ❤

[@Massachusettsmorons]

I’m not gonna lie I just bought a CFmoto450ss and it’s quality rivals Japanese bikes. It’s comfortable, stable and feels solid. Anyone who craps on CFmoto clearly has a ego problem

[@NeoMoto]

CF Moto sure is different compared to other Chinese manufacturers (We have an abundance of Chinese made bikes here in the Philippines) from build quality alone, the difference vs QJ motor is far off.

[@mastergogoy6166]

And qj is priced higher. 263k 450nk vs 288k srk400. 😂

[@razor1uk610]

..and its QJ's are still less well made@@mastergogoy6166

[@victor9797]

As the owner of a cfmoto side by side I have to say it was worth every penny and the savings was just a bonus

[@joee8795]

CFMoto has been in Canada for YEARS, trust me, they’re junk LOL The only people that praise them, are the people that couldn’t afford a proper machine and had to “settle” for a CFMoto.

[@Timo-wv3dd]

Hilarious intro... 🤣🤣🤣 - Sometimes a motorcycle is actually just a motorcycle.

[@SongJLikes]

Anyone ever notice that WWII’s Axis nations (Japan, Germany, and Italy) make the best performance motorcycles??

[@domesticrifles4068]

Some of the worlds best engineers were on the axis side during WW2 so it. Makes sense

[@ut90J]

I never noticed that before. Interesting.

[@SongJLikes]

@@domesticrifles4068 - to a degree, you are correct… Japan and Germany certainly had excellent engineers, but constrained by wartime logistics/materials, their ‘progress’ throughout the war shifted to efficiency/apt prioritizing to deal with constantly shifting availability of resources…. Most significantly, I can imagine a new sense of freedom/opportunity post-war to flex their engineering skills and visions… But Italy’s military engineering was a significant factor in Mussolini’s demise….

[@BrewProof]

@@SongJLikes Dunno if Ferrari or Lamborghini ever got into the tank building business like most other auto makers of the day, but if they did their tanks would probably be very fast, very unreliable, and impossible to repair in the field.

[@nickolaslewis4416]

Good observation. I may be wrong but I think it has more to do with the economic reconstruction efforts made by the world leaders. Ironically, this is also the main reason why China has the manufacturing and shipping competitive edge over developed countries. It’s actually cheaper to ship an item from China to your front door than it is to ship it across the US.

[@johnmccrossan9376]

More competition in the market is good, I just wish domestic brands would actually compete rather than just giving the utility market to the far east and focusing on luxury toys. These days even the most utilitarian bike or car is grossly overpriced because a few companies have an effective monopoly on the "budget" market

[@UnimpressedAussie]

There is a reasonable chance that I'll own a CFMOTO at some point. They have really lifted their game. A decade ago I never would have said this.

[@Lil_poopy_Squat]

Ngl that gray red bike looks sexy as hell but I don’t think I’m gonna be the first one to take a chance on it

[@shegocrazy]

Not for me. Yeah.. I'm a snob.

[@fahmiyusoff9154]

Im in for it.. KTM are relieble these days.. Ducati arent

[@lawrenwimberly7311]

My first bike was a 1978 400 hondamatic Hawk... mt SECOND bike was a 193 Yamaha Vmax.... I had to RELEARN how to ride once I got that 156 HP BEAST

[@mike8748]

If you can not even see where their weapons are pointed at, that is pretty dxmb! this is called make your potential enemy great!

[@Dispariabooks]

...what?

[@joelschram14]

spot on.

[@ragercrepair9301]

I think this will be great for the bike world! Good video.! Thanks.

[@animeking9486]

🍦

[@alex9788XD]

Please more videos about CFMOTO because it seems they are bringing some cool stuff and im not sure what to think about the quality so far... Aldo they seem Fun and specially for the price, they bring a lot of tech!😄

[@mycool_p6483]

China is gay no matter what

[@nickolaslewis4416]

Very compelling argument

[@9Epicman]

man i just want them to make a 600cc bike

[@KiliPukki2000]

650nk

[@user-ez9rw5lm5w]

CFMOTO's 675cc three-cylinder motorcycle is in the road test and is expected to debut together with the 1000cc V4. 450NK has also started selling.

[@9Epicman]

ah but not a parallel twin ;/@@KiliPukki2000

[@javierreyes4748]

​@@user-ez9rw5lm5wDo you know anything about the 1250nk model? or is it just a rumor?

[@user-ez9rw5lm5w]

@@javierreyes4748 There have been rumors of 1250NK before, but there has been little news recently. I personally think that CFMOTO will focus on the research and development of 1000cc V4 for the time being, because they will rely on this 1000 SR to compete in WSBK. If everything goes well and gets a good response, they are expected to launch 1000NK soon, and there is no more news about 1250nk. .

[@simpletonballsack]

Not sure about that superbike but the 800MT is just about impossible to overlook when looking at the 750-900cc adventure-tourers (aka, comfortable road bikes).

[@pedrofelipe685]

I use to live in china and rode a 650 nk for over 3 years and never give me a problem.

[@actuallyharuto2382]

the first bike for a beginner myself will be 300sr and I WILL WAIT AND WORK FOR THE BIGGER MACHINES THEY MAKE

[@1andtheOnly]

China does not just have 1-2 motorcycle brands but 8-9 brands to look out for. China has the largest pool of enginneers, technicians, the world's largest highly qualified workforce.....so it's not hard to see why they are the world's manufacturing central.

[@justinmochi7323]

Idk my cfmoto dealer has treated me way better than my honda dealer... I'm much happier to do business with those guys, even though my dealer is way further away

[@dougiequick1]

Re "unbreakable ASV levers" ? Meanwhile many levers are obvious DESIGNED to break (with an actual break point notch midway in the lever) rather than to destroy that expensive brake master cylinder. So IS n unbreakable lever a good thing if the application is on a master cylinder?

[@ROCKNROLLMODS]

Wouldn't our war Vet grandparents be more likely to disapprove of a Japanese motorcycle?

[@BadHarmonics]

Cf Moto cut their teeth building their clone of the 247cc sohc liquid cooled Honda helix engine. Gotta say, as a engine builder, and multiple fast motorcycle owner , Ive actually owned and rebuilt some of the original cfmoto Honda reflex/ helix clones, and they run good. And Last A while, A crankshaft with rod & bearings for them is $80.00. a piston with rings is $19.00... Drove one 500 miles a week for almost a year. 85 mph/80 mpg

[@chip6954]

It's not a Chinese thing, it's seeing KZbinrs all of a sudden cream their jeans (most sounding scripted) over a new product/company under the banner of "Includes Paid Promotion". I know, gotta make a living!

[@chrisdadigger1018]

The only good thing I see out of this is these bikes may keep the price of the Japanese bikes in check.

[@petercumblin]

If you on the box of any hd part you will see made in Taiwan. Hd is only assembled in USA not made. Cf moto is likely to pull it off

[@L4ND.SH4RK]

You're a goober😂😂😂😂 Thanks for letting me know about a quality, American-made product in ASV!

[@davidjordan5539]

You weren’t even alive during the AMX years sonny

[@warrenr4]

So CF Motos motorcycle credibility is due to the fact it makes engines for KTM. KTM’s reputation for reliability is poor. I’ll be sticking with my Honda 🍦

[@brunojesus5444]

I started with a QJ motor 125cc, a Keeway RKF, in some countries it’s sold as Benelli. It sucks, after 15 days of ownership it was dead due to an electronic problem, then it broke the front fender, after that electronics got busted again, then the led cruising light just stopped working, after that the front fender got broken again. it also just shuts down while idling, the dealership was never able to fix it. All of that in 1 year and a half and around 15k km.

[@Blackomega-666]

Am I the only one that picked up on "rustle some feathers" 🧐?!? Papa Yam it's 'Ruffle'! 😂 Your not rounding them up and stealing the feathers! 🤣

[@prestonpfeiffer6618]

So when you are leaned over in a corner going 100+ mph just remember your motorcycle was made by the same country that made the spatula that you used to make breakfast.....and broke.

[@Loubie2005]

Looks amazing, definitely would buy it

[@livingintheLight.]

I say we just need more vtwin/v4 sportbikes period. Bring back the RC51 and TL1000R for fox sake

[@50_ANNIE]

I love the 450SS and can't wait to see what's next from CFMoto. I currently have a Ninja 400 and hope to add a mid sized sport bike and would love to see a CFMoto 700SS.

[@IN_ZANE_]

Go ride a GSXR

[@user-ez9rw5lm5w]

Most likely the 675SS and 675NK with three cylinders, and the 1000cc V2

[@richardlou9802]

CFMOTO has declared three cylinder 675sr and four cylinder 500sr in their CFMOTO day, egineering bike already explosed .

[@gregsterrz5830]

9:52 Henny Huisman surprise surprise, represent 🇳🇱 😂🎉

[@nurzrachit7133]

Harley is possibly doable. I've had 140hp inline fours and man it was a blast, but it was frustrating to have a bike that I could never crack into.

[@bradmottishaw467]

Just last month KTM, who originally owned 25.1% of MV Agusta, has acquired another 25% of MV Agusta. That means that KTM now owns the controlling interest in MV Agusta, and if they are also in bed with CFMoto, then I would expect that 1000cc superbike to be based upon a Chinesium version of the MV superbikes.

[@joshuavisser5289]

Anyone gonna talk about that voice break at 2:06 XDD

[@mydarts4669]

x350 and x500 both available in Australia as learner legal cycles

[@Lando694]

Waitin for a good aftermarket before I start getting into CFMoto.

[@a999_4real]

I own a 650nk. Many dont know the brand but then they get surprised when they ride it. Only Con is the 203kg weight.

[@prodigalsonresurrection]

🍦 once they successfully undercut the competition and become a household name, reliability and craftsmanship will dramatically drop.

[@joeeblonde5079]

Even though kawa and yamaha are almost the same price as cfmoto in mexico everyone is going for the cfmoto I got the sr-s 450 and it crazy and even though my house is in a rocky hill

[@frankherrelljr4841]

Well I have got to ride my boss CFMOTO 450 SS I liked it and enjoyed riding the motorcycle.

[@Reaperzx6]

the only think im worried about is the quality on the clip on on the cf moto i saw a video of someone hitting a bump on a cf moto and their clip ons broke off

[@mattp.7318]

I think it's hysterical that there's so many fools out there that would only ever consider riding a Harley-Davidson because it's the only legitimate "American-made" bike and they make a Chinese motorcycle. F*ckng HYSTERICAL. If CFMoto is making great bikes then fantastic! More to choose from!