AMD Radeon RX 6600 Pulse Thermal Paste Replacement

Our Discord community - IT Jungle invite.itjungle.eu
Like and subscribe if you like the video.
More videos: / @laptopdisassembly
Tools i use the most:
1. Blade - www.aliexpress...
2. Screwdrivers - www.aliexpress...
3. Thermal paste - Arctic MX-2

[@NebiCarax]

Time to repaste my card too, the hot spot goes above 110º under load until it shuts down, like I can barely play for 15 minutes. Thank you for showing the insides mate.

[@itmah]

Thanks my man, the tutorial worked for me.

[@GravityBlood]

Sapphire also have really bad cooling performance on 6600XT pulse and 7600 pulse as well

[@aresident7745]

to make it easier to take apart just warm it up a tiny bit by running a game for a few seconds and then powering off your computer til it's cool enough to touch

[@EdithScripting]

thank you mate

[@hosamajram1164]

Nice work .

[@Diego-nf8ip]

I was doing everything as is but the fan connector would not come out and the cables ended up coming out of the connector and the connector remained connected to the card. Now what can I do?

[@LaptopDisassembly]

Just put back the connector the same orientation. It should work fine, just be careful not to bend the pins, while plunging it back.

[@CuriousGamer022]

Anyone know the thickness of the thermal pads on these cards?

[@LaptopDisassembly]

VRM pads are 1.5mm

[@CuriousGamer022]

@@LaptopDisassembly thx mate

[@rajanchauhan3459]

does it have any impact on temps like can you please tell before and after temps

[@LaptopDisassembly]

The card is used for mining. Accoyyo the customer the temps under load was above 100 and powers off. After the cleaning under load works around 80.

[@Piesianka]

What is this? Why are you doing this? Why do you install new paste when you leave the old thermal pads...

[@LaptopDisassembly]

Thermal paste and thermal pads have nothing in common. Paste dry faster, and if the pads are one piece, you better not replace them with cheap stuff.

[@sohaibahmadpoor3215]

Right after i broke my card trying to repaste ... Thank you youtube

[@LaptopDisassembly]

Usually there is nothing complicated to remove few screws and clean the paste. But after all you do that on you own risk. What exactly happened, if i can help somehow.

[@devanzafillah3007]

how thick on Thermal Pad? 1.0mm or 1.5mm?

[@LaptopDisassembly]

The vrm thermal pads are 1.5mm

[@devanzafillah3007]

@@LaptopDisassembly copy that understood, thank u bro

[@13gears]

Hey .. crappy channel name, this is a desktop component

[@LaptopDisassembly]

No way..... :)