How To Repaint A Classic Steel Frame Using Spray Cans / Samurai Paint TC Y242

Maraming Salamat sa buong Alvarez Family and SPA Transport sa puwesto para akoy makabuga
Maraming salamat sa patuloy na pagsuporta, patuloy lang na mag like, share at mag subscribe sa aking channel mga kaBaga
puwede din kayong mag send ng message sa aking FB Page
m.facebook.com...
para sa magtatanong kung saan location ko
sa Maybunga Pasig po ako
Lagi din tandaan na wala sa pintura ang ikakatagal ng isang paint job, dahil kait original na pintura pa yan, mababakbak at magagasgasan pa din kung hindi din maingat sa pag gamit
Disclaimer
-This video, including examples, images, and references are provided for informational purpose only.
-The names and logos used may be the trademarks of their respective owners, no copyright infringement is intended
-Credits shall be given to the rightfull owners of the brand names and logos
Ito ay isang amateur paint job lamang, ang aking mga gawa ay base lamang sa aking karanasan, kaalaman at opinyon, maaring makakita ng mga pagkakamali sa mga bawat bahagi ng proyektong ginawa
Maaring magkomento para sa inyong mga tanong suhestiyon para sa videong ito
Huwag din kalimutan mag Like, Share, Subscribe at pindutin na din ang Bell Button para updated sa mga bagong videos at tutorials
Maraming Salamat

[@garryguardiano2742]

Nagiikot lagi to sa Arcovia Pasig to pag hapon

[@reymartalano370]

Lupet mo tlga idol

[@chrisworxcustoms]

salamat

[@justincarlmiguelfenix7051]

Early gaganda ng repaint mo idol

[@chrisworxcustoms]

salamat!

[@jasonphair7619]

Sweet result!😎👌

[@chrisworxcustoms]

Thanks!

[@onotv86]

3rd 😘

[@chrisworxcustoms]

thanks!

[@jansuico9099]

Idol ❤️🙏

[@chrisworxcustoms]

thanks

[@aaquilunos4440]

👌👌

[@corruptone7428]

Pag iniistrip ang pintura sa steel, ano ba dapat gawin at dapat hindi gawn?

[@chrisworxcustoms]

wag mo babasain lacquer thinner pang banlaw dry sand lang gawin kapag wala ng pintura

[@corruptone7428]

@@chrisworxcustoms ahhhh, ilan po cans dapat bilhin para po sa primer,paint at clear coat

[@PomskieSaints91]

Steel frame din po ung mtb ko pwede po kaya primer gray lng ipang paint ko?

[@chrisworxcustoms]

pwede naman, pero kung may budget ka, atleast epoxy primer lamang

[@aurteekay6339]

😂 definitely NEVER DRY SAND AND DONT DO IT WITH 280 grit sandpaper especially. You need like 350 minimum 400-450 is what you want. You gotta get soap and water and sand with that… or water at the minimum. Trust. white zinc rich or cold zinc primer. Takes long to dry but worth the effects. To fix this you might be able to fix those scrapes from the thicker sandpaper, use “self etching for metal” spray paint it’ll say it on the front. Use that after primer, it’ll fill those imperfections same with the zinc primer it settles more slowly and evenly but be careful n wear a mask or u can really get sick

[@chrisworxcustoms]

thanks for the pro tips but I tried wet sanding steel frames before and it gets yellowish after a few minutes yes self etching primers is much better for bare metals but much more expensive any paint high or low priced quality can still be chip off if you crash on brick walls🤣

[@boosterttteamjomalagu7247]

Pwede ba bosny primer gray gamitin

[@chrisworxcustoms]

pwede po

[@boosterttteamjomalagu7247]

@@chrisworxcustoms ok po thanks

[@boosterttteamjomalagu7247]

@@chrisworxcustoms bat po pala need pa ng surfacer paint

[@chrisworxcustoms]

@@boosterttteamjomalagu7247 additional layer para di madaling numipis ung pintura kasi lilihain pa bago kulayan

[@boosterttteamjomalagu7247]

Di ba po una primer..then surfacer.. tapos silver then ung pink tapos clear gloss paba

[@osamudazai9243]

anong framr?

[@chrisworxcustoms]

di din alam nung may ari