BIKE PAINT DIY - spray can matt & gloss - the ultimate guide

You want the matt and gloss effect on your bike? Check this video and find out 3 ways to achieve a matt /gloss design on your bike. Material list in the video description!
US links:
masking foil: amzn.to/3nUCRiR
masking foil: amzn.to/3j6igV0
sandpaper 800 grit: amzn.to/31WWa1B
sandpaper 1200 grit: amzn.to/3e9ScaN
dry sandpaper 120 grit: amzn.to/3k2t72B
masking tape small: amzn.to/3oFfn1j
masking tape: amzn.to/38jrbRb
transparent tape: amzn.to/2IhUCba
2K primer black spray can for steel, aluminum, carbon: amzn.to/3oF7w3P
1K primer steel / metal: amzn.to/3exR5Sr
1K primer uni: amzn.to/36fuVjR
adhesion promoter spray: amzn.to/37cZJnC
adhesion promoter is needed for difficult surfaces to make the color stick on plastics
2K clearcoat gloss: amzn.to/2U3BUa0
2K clearcoat matt: amzn.to/32i0I2A
1K clearcoat gloss: amzn.to/2JKEArj
1K clearcoat matt: amzn.to/3l76lIn
black spray paint: amzn.to/2GCfMAB
metallic blue spray paint: amzn.to/3ljAN1O
neon orange spray paint: amzn.to/36haSSc
spraymask: amzn.to/2Ib0J16
EU links:
Maskierfolie: amzn.to/37diFmd
Maskierfolie grau: amzn.to/3k8D8w5
Sandpaper set: amzn.to/3kN2Uq3
Sandpapier 800: amzn.to/3oZWWVr
Sandpapier 1200: amzn.to/2GFbLeI
Sandpapier trocken 120: amzn.to/32o6b83
Maskierband schmal: amzn.to/3mCyiIj
Maskierband: amzn.to/2UfRjo1
Paketband transparent: amzn.to/3n2ghU1
2K primer black spray metall, alu, carbon: amzn.to/3jL0irg
1K primer stahl / metall: amzn.to/3exivb4
1K primer uni: amzn.to/2I3lSL9
adhesion promoter: amzn.to/3eE5Pz1
spray schwarz: amzn.to/3k7O2Bi
spray weiß: amzn.to/2TZQAaj
spray metallic blau: amzn.to/32htHDN
spray neon orange: amzn.to/38gO1sN
2K lack spray glänzend:amzn.to/3eLVrFL
2K lack spray matt: amzn.to/3p7dhHF
1K lack spray glänzend: amzn.to/3n5yS1D
1K lack spray matt: amzn.to/2JOmaGh
Atemschutzmaske: amzn.to/3dYHLF5
Check also my daily stuff on:
Instagram: / etoe.designs
Facebook: / etoe.designs
disclaimer: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. You have no extra cost using these links. You help to support the channel and allows me to continue to make videos like this. Thank you for watching! If you are interested in bike design, please visit also the website www.etoe.de/
Painter: Martin Grey
#spraypaint #bike #trick

[@juanm3221]

Martin, awesome video as always! Question: what was the original color of the steel painted tube? Will the Montana Caribbean on a black primer give me that finish?

[@ETOE]

Color like this: amzn.to/2UiKAcG disclaimer: This comment contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. You have no extra cost using these links.

[@daxtonrogelio5072]

Instablaster

[@superpedro4691]

@@ETOE Martin I have a black matte finish and I would like to get satin finish ... Can you do that without painting it? Any recommendations, Thanks

[@songsandverses]

@@ETOE I'm surprised you didn't say ask your girlfriend...😄

[@BuildaBetterBike]

No one else gives this sort of detail. Thank you!

[@anthonys6657]

Wow! Really impressive! You are like the Bob Ross of frame painting!

[@YuoTubeTobi]

One of the most helpful paint job videos on KZbin. A lot of great methods and tips shown! Now I learned that matt coat is thinner then clear coat so it's best to do the matt after sanding the clear with vinyl attached. Thanks so much for spreading your knowledge!

[@vincentrivera5996]

I love these videos. I've been trying to learn how to do a nice diy paint job on my bike and this gives me the confidence to try. Thanks, Martin.

[@danielandres4353]

This is my new favourite channel! So much detail explained. Exactly the sort of tutorials I want to see before attempting my frame project.

[@bikestreamer9016]

This was so motivational!! I have a number of older bikes but never dared to even consider repainting them until I stumbled across this video. Thank you!

[@BikeSeatPhilosopher]

Martin, I just wanted to say how much I've been learning from your entertaining and informative videos. I've painted a few bikes with mixed results (well, poor actually) but I can see many mistakes that I made and can't wait to try out some new techniques.

[@TheManion123]

Your the man Martin. Been following your videos for a couple months. Painting my daughter’s bike. Thanks for all your advice.

[@slavikamex]

This guy is a genius painter. Every detail. Also very relaxing to watch. Afraid to ruin my frame but may go for it after watching this.

[@countinfinity776]

"Same temperature you use to wash your kids, i recommend 60 degrees Celsius" lmfao, this guy is hilarious.

[@ibrudy69]

🤣

[@thepowerpointclub2820]

I’m currently pimping an old BMX, this was hugely helpful! Subscribed!

[@Chunkerdunkers12]

Watching these really makes me want to paint my helmet color shifting gold and black. I'll have to pick up another helmet to test and practice!!! Great tutorial! I've learned more here about painting than I have in industrial design school

[@stevehiggins1263]

Another great video martin! keep up the great work.

[@alr6463]

Great energy, great work. Wunderbar!!

[@gsmecanica]

Increible! Thanks for sharing this content mate!

[@confesorcordero6807]

I love the way you explain stuff you be real specific thanks

[@JeffJonesEthx]

Love the video! It’s cool to just watch you do something you enjoy.

[@MrPequenio]

I am absolutely blown away. Damn good job and attention to detail 👏

[@jab5569]

Great vid Martin, thanks for the indepth process description.

[@niconine268]

Yeah top creativity & great finishes

[@jasonhenderson4826]

Wow, well done on that Matt finish on the gloss

[@carljones7992]

Glad I've found your channel. I just want to paint EVERYTHING after watching your videos 🤣🤣 cant wait to paint my first frame

[@terrynicholson8320]

Love this guy , he’s kickass every time 🤘

[@YuoTubeTobi]

Thanks so much for doing that great vid, after I asked for it in the comments of your previous video. You're a fine man!

[@cymonfeliciano7476]

This is what I am waiting for thank you for this. More power to your channel bro

[@ConstructMTL]

OMG is this for REAL ?!?! I've been digging down the pits of old message boards, trying to pieces together all this information. Thanks for much !!!!

[@ElenaZelena]

bro this is top of the shelf guide! thanks Etoe for the work u put in it!

[@Peter-bj4dr]

That actually is some really in-depth high quality how to. I’ve just ordered a cube bike and don’t know if I’ll be keeping the colors. Looks like a fun winter project. Also thx for the European links. Cheers. 🙂

[@Scott-to8ri]

As always good work and entertaining!

[@DanT10]

Love the techniques and great tunes too.

[@macp344]

Thanks Martin for this video, one of your best definitely ! Because of your videos, I bought 3 days ago everything to do a diy paint job on my old bike with 2k primer, 2k clear coats (mat and glossy) and 2 colors. Now I will be back here in 1 year when I'm done with the sanding the frame :)

[@Cronff]

Please share your results once done 😎

[@macp344]

@@Cronff sure 👍😊

[@alavroff01]

@@macp344 so you done sanding ? :D

[@antonijankowski3379]

How’s the sanding?

[@johnbobbitt6470]

😂 funny...but seriously. 😐 At least heres someone rooted in reality. 90% of painting is the prep work. Or else its a lot of money and time for nothin. Im curious to see how that came out.

[@acanksepz]

this video answers my thoughts, thank you 👍

[@patzrosete9720]

How I love the way you explain things you do. Very clear. Like to learn from you

[@JC-ug7ix]

This guy is bonkers and I love it. Fantastic video 👍

[@hockysa]

this was very informative, you deserve more likes

[@EnriqueMannucci]

You're an artist Martin.

[@Cronff]

Such an interesting video, lots of useful and advised advices Many thanks

[@hanns1962]

man! ur playlist damn good! u got a great taste

[@nicoleandjoshbaldwin4228]

I’m definitely going to be painting some tubes. I have tons of scrap tube to practice with

[@MrKrueger88]

Awesome 👍👍👍 I'm going to repaint my frame 😁👌🤗 Great video !!!!!!!!!

[@wirasandiruslan]

Thank you so much for this video. It will be one of the guides for me to paint my bike. 🙏🏼💗🙇🏻‍♂

[@kylestewart4444]

You do beautiful work. I think I’m going to try this on my new Roadlite 7.

[@pepinodelapampa4173]

thank you for your videos, it's very usefull, i'm gonna try this black mat and gloss and with your tuto i feel able to do this

[@FarmerFpv]

I wish I had the skills to paint my bike like that. Amazing work bro, all three are dope. Thank you, Sir ETOE the III, Son of Earl!

[@danallured5806]

You do have the skills to paint a bike, you just need confidence to try! Practice with some rattle cans on old bits of metal to develop the skills until you feel confident enough to paint your bike!

[@ilive4games780]

Very nice detailed video of how to do it! But the great key to having an amazing paint job is that you need a dust free room. Otherwise you will see it when you apply any sort of glossy finish on top

[@robotennis61]

you are such a good painter

[@anyacara9538]

Thank you for your charming helpful video.

[@franzlicanel3962]

awesome job dude 😮

[@OlkhanBrasil]

Hello from Brazil, you job is amazing.

[@SpiritualStuntman]

What a great fucking video brother!! Absolutely love it. Very relaxing music, really good detail and info, combined with your unique style. Thanks 🙏🏼

[@Tazod41]

Enjoyed the music with this video and more great info

[@aka_22722]

Top Video, Martin! Danke!

[@meiraialon9374]

my second favorite German painter 🙏

[@gmbarrett50cal]

Love your videos

[@ilovemanga442]

I was thinking to paint my bike and that video just came in time, very helpful Thank you.

[@ETOE]

Glad I could help

[@joacimLiam]

amazin tips. thank you

[@bobbybrown5217]

exactly what i was searching for!!... thanks✌️

[@ETOE]

You are welcome!

[@andreanetto69]

There’s nothing to say: you’re the best!!!!

[@RasJuanFe]

A Master piece!!!

[@jovan.vuckovic]

this is the video i was searching for

[@YuunaAndCuddles]

Exactly what I need to learn.

[@romnickmorada7623]

I really appreciate your efforts efforts sir, thankyou so much❤️🥰

[@magin2014]

Excellent video thank you great job

[@ETOE]

Thanks!

[@julianrivera2612]

Excelente tu canal, la edición de los vídeos estupenda, y las explicaciones pasó a paso geniales, Gracias

[@sedona741]

i was waiting for this

[@tvonb2301]

Schöner Hintergrund. Schön dargelegt. Dankeschön.

[@shaunsmith3660]

Great skills 👌

[@mariobaert82]

Je maakt fantastische you tube filmpjes 😄👍

[@monaaronpalencia283]

hello from Philippines i love your work so amazing😍 i want to repaint my bike but your so far😆

[@johnbobbitt6470]

Thanks for sharing

[@Deanisok]

Yes Baby must have gone through your head.... god knows how many times..... such perfection.... i 💌 it for a spray job..... such admiration and inspiration..... teach me please

[@therealphee]

Great video. I also recommend having a shop sandblast the metal parts of the bike. It costs about $50 and saves me hours.

[@etriess]

Great channel! Thanks for the knowledge you provide. One question I have is what software do you use to present your paintings to your customers? and maybe a video on that side of your process?

[@UlrichVIII]

great tutorial, danke!

[@dariuszmaciag5972]

Thank you Champ!

[@arnebollensen1017]

Hi Martin, Your englisch is so fluent that makes you nobody after! Regards Arne Bollensen .😀😀😀👌👍😎

[@owain100]

Love your videos - Thank you On my MTB i have lots of stone chips into the lacquer (paintwork is still intact and not chipped). I would really appreciate a video on how to delicately sand the lacquer without destroying the original paintwork and then apply new lacquer. thanks

[@kriszzillaYT]

Background musics are awesome.

[@zackwar1324]

Awesome!👍

[@ETOE]

Thanks for the visit

[@rootdown]

Thanks Martin for your tips ! I see all of your videos and i try also to paint my bike! Actually yesterday I paint my bike with paint gun and airbrush! The results was fantastic ( i have use black color and after pigment powder to color my bike frame like you did in the specialized video) till I remove the masking tape...The color (only the black color not the pigment powder color) was also under the masking tape and destroy my graphics! I have try to paint only the destroyed masking parts but no luck! I must sand all the bike frame and start over! :(

[@imnotsharingmyrealnameonth5601]

u deserve more subs

[@sdevane75]

WOW!!!! - this was so interesting and informative. Brilliant work, I learned lots and lots - you made me wan to try and glad I watched it - earned you a new Sub too. :)

[@mogglie]

I need to do this. To my tri-frame

[@wjeurs]

Great video again! I think I'll buy a cheap second hand frame soon and experiment... Only have to find a place that can cut the masking for me in the Netherlands. Alligning that masking on the already painted logos must be hard to make perfect :O

[@alexbp010]

Thanks for this awesome videos! When a video for a carbon sight frame? It needs primmer? Just only coat? etc...

[@agility_matters]

I understand we still use primer. I'm about to do it.

[@BloodThunda]

26:25 family friendly water ... that chuckle 😆

[@EnriqueArcos1965]

Hello Martin, i have a question what is the brand name of your signwriter printer and cutter you use' thanks great videos.

[@paulkappeler5911]

Great video! Do I need to paint the whole bike with a glossy clear coat, or just the areas where i will apply the stickers?

[@Anatoli-y]

Stunning as always! Regards from russia

[@tomastorres7497]

Great video! Questions: If I use black primer and want white logos do I need to repaint black around the stickers after I have finished with the white or should I just go to the colour I want for the rest of the frame straight away? Thanks!!

[@ericfullmer3105]

Hi Martin. Love your videos, entertaining and informative (as well as hilarious). Want to do this with gloss white logos on matte black frame. Guessing most pro way is: 2K white primer, sand, white base coat, mask logos, black coat, remove stickers, sand, gloss clear coat, re-mask logos, sand, matte clear coat, flex like a boss. Sound right?

[@DrulleThy]

Hi Martin. Nice walkthrough of the DIY :D How many ml do you use of primer, clearcoat and coloring (example mat black on all of the frame). Just to know, whether you should have 2 x 400 ml or 3 x 200 ml or so :) Thank you in advance!

[@lotrt2t]

Fab video. Does anyone know what I'd search for to get those kind of stencils where you peel them off?

[@rustlingbushes7678]

www.amazon.com/VViViD-Low-Tack-Adhesive-Stencil-Masking/dp/B07PW95WW3

[@denisberdin343]

Super boulot 👍

[@ElMartillo666]

Thanks!!!

[@maartensteeghs9821]

Great work Martin! I was wondering, is it also possible to do a chrome/mirror finish with an accent colour? Keep up the great work!

[@ETOE]

Not with spray cans.

[@motleypixel]

You produce nice work so you must be doing things right. I can see for sure you choose good paint products so that's not a question for me. What I want to know is your process and timing. In this video you primed and laid a base color all in one step. Would priming, off-gassing for 2 days and then wet sanding the priming coat, cleaning, drying and then applying a top coat be better or worse or same and why? How long did you wait to apply the gloss/matt clear coats? It's obvious you didn't do the base/clear in one step since you wet sanded the base coat. Thanks for the great video and your time in putting it together and sharing it.

[@himornsterrr]

Great vid! May I know the audio used around 22:00 ??

[@stephensimpson3352]

Makes it look ssssooooooo ETOE🎬👍❤️