Yardforce Push Mower Rattling, Making Clanking Noise or Weird Sounds? 20,000 Subscribers, Thank You!

Рет қаралды 1,529

Individualized Repair Inc

Күн бұрын

Пікірлер: 45

@robcole332 4 ай бұрын

Great video

@IndRepair 4 ай бұрын

Thank you!

@shedder1104 4 ай бұрын

You are so calm and smart! A great mechanic and person I'm sure!

@fartsackjack7081 4 ай бұрын

GREAT GUY ...GREAT BUSINESS MAN ALSO ....

@IndRepair 4 ай бұрын

I appreciate your kind words! 🙏

@IndRepair 4 ай бұрын

Thank you!

@IndRepair 4 ай бұрын

I have been through enough mostly nothing upsets me try to stay calm and collected

@RichardSivonen 4 ай бұрын

Totally amazing 😲 👏 you would never think 🤔 😉 great job 👏 🦅🦅🦅🫠

@IndRepair 4 ай бұрын

Thank you!

@Rein_Ciarfella 4 ай бұрын

Martin, I’m unclear as to exactly why it was making an odd noise. You would think if the adapter is seated more onto the shaft without the spacer, then it would be even more secure. The only thing I can think is that the lift wings of the blade were just barely touching the drive belt cover, although you didn’t mention anything and I couldn’t see anything obvious. I suspect AYP had a supplier provide crankshafts that were found to be too short and they simply added spacers for that run of engines to compensate. I would probably dimple the spacer so it couldn’t fall out again.

@IndRepair 4 ай бұрын

When the adapter isn't on tight it flops back and forth on the blade and makes this noise. I have seen it on toro recyclers many times and on others that hit something and the keyway is messed up on. The blade was well away from anything underneath

@paulmonk7820 4 ай бұрын

But you said it WAS tight, and the adapter length looked different.4:14

@IndRepair 4 ай бұрын

Without a spacer, even if tight it flops back and forth. The spacer keeps the adapter and shaft from moving against each other. Otherwise the only thing holding it tight is the end of the adapter

@paulmonk7820 4 ай бұрын

@IndRepair, The woodruff key keeps the shaft and adapter fitting tightly, and if the bolt is the correct length and properly torqued, there should be no play or looseness in the blade.

@paulmonk7820 4 ай бұрын

@Rein_Ciarfella I think you're spot on! This mower crankshaft and adapter were the correct fit. The adapter and spacer came off a shorter shaft. If he had just used the same adapter, or probably even the one he found, it would have been OK. The fact that the woodruff key seemed too long was because the original configuration didn't need a spacer. I suspect that the bolt wasn't torqued when the owner put the sharpened blade back on. There appeared to be some rotational slop in the blade when he first touched it.

@fartsackjack7081 4 ай бұрын

20 K .....CONGRATULATIONS MAN !!!!!

@IndRepair 4 ай бұрын

Thanks buddy!!

@MikeClark-s8s 4 ай бұрын

20 K good deal!!

@IndRepair 4 ай бұрын

Thank you!

@frankie7508 4 ай бұрын

You've pointed out why I would not buy a yard force. It makes me wonder how many other design features are unique. Thanks for Yet another Great video. 👍👍👍

@IndRepair 4 ай бұрын

Man of them including the handle height adjustment and handles. They are the only ones with adjustable bail cables I think I have even seen though

@u842mjt 4 ай бұрын

Congratulations on 20K you deserve it. Always have great content!

@IndRepair 4 ай бұрын

I appreciate that!

@philliphall5198 4 ай бұрын

I noticed up north do it yourself mechanic like to work on grass a lot No wonder they lose parts 😢😢😢

@IndRepair 4 ай бұрын

There is no doubt we have a lot of DIY people around here so many times you have to be a detective to figure out what the issue is

@JoeyOneill-vn9zi 4 ай бұрын

Great deactivate work it always pays to keep stuf

@IndRepair 4 ай бұрын

I struggle throwing stuff away sometimes because it seems like you need it right after you toss it but it is necessary to be able to find anything

@larrygould8246 4 ай бұрын

Who would have figured!

@IndRepair 4 ай бұрын

Crazy stuff!

@garysgarage3669 4 ай бұрын

Great video as always. So what was actually making the noise? Was the blade too close to the deck without the spacer?

@IndRepair 4 ай бұрын

The spacer not being in between the end of the shaft and adapter was allowing the shaft to rotate back and forth inside the adapter making the loud clunking. Only the surface area at the end of the adapter against the drive pulley was holding it. Even though the bolt was tight it was not enough to keep it from moving

@nickiemcnichols5397 4 ай бұрын

Another reason I went cordless electric. I’ll never go back. No more fumes, no more smelly gasoline. And it’s so quiet it won’t cause hearing loss or disturb the neighbors.

@IndRepair 4 ай бұрын

I understand that! Smaller yards it is ok but I can't justify $600 and then another $250 for another battery just to finish the yard and expect it to last 2-3 years

@paulmonk7820 4 ай бұрын

I can't see why there's a need for a spacer if the blade adapter is original. It should have been a perfect fit, and when the bolt was torqued, there should have been no slop. Was the spacer needed because the adapter was too long on the shaft? 😮 Also, there seemed to be rotational slop ẁhen you first touched the blade. Was the blade the correct one for this adapter? 😮 You said in the comments that the adapter was tight. And why was the key too long? Probably because there was no keyway in the spacer. This leads me to believe that this mower didn't need the spacer, and that the adapter and spacer on the other mower came off of an engine with a shorter driveshaft.

@IndRepair 4 ай бұрын

The spacer comes with the blade adapter if you look up the parts. Blade was correct, no slop between blade and adapter just between adapter and shaft because there was a missing spacer

@paulmonk7820 4 ай бұрын

OK, their website shows two blade adapters: 1003267001 price $8.45 Fits these models ONLY: YF22-3N1 YF22-3N1SP YF22-3N1SP-SC 1003773000 price $15.45 Fits this model ONLY: YF22-3N1SP-SC YF22-3N1SPVS-SC isn't on the lists of models that require the spacer. I can't find a reason why. After looking deeper into it, this model uses a different engine. 😮

@IndRepair 4 ай бұрын

See sumec.mybigcommerce.com/yard-force-yf22-3n1sp-sc-22-3-in-1-lawn-mower/ that clearly shows the parts and the blade adapter...

@IndRepair 4 ай бұрын

Part number 1003773000

@paulmonk7820 4 ай бұрын

Looks like only three of their mowers use the B & S 625 150cc engine, including this one. Do you know which model or engine the adapter and spacer came off of? 😮

@IndRepair 4 ай бұрын

Same model as listed in the video and link above as described