Yardmax YS0552 Log Splitter Repair - Part 1

In this edition of the scenes from the Shrine I'll try to repair a leaky non-functioning Yardmax YS0552 log splitter, and walk you through the troubleshooting process. Join me for part 1. Stay tuned for part 2.

[@Phiyedough]

I have now watched quite a few videos about these log splitters and this is by far the best I've seen. Mine does not leak but the ram movement does not always start unless I waggle the lever. It also sometimes doesn't return and I need to push the ram back by hand. Also it has only ever been able to split thin logs but I bought it secondhand so I don't know how it performed when new.

[@ricko3k]

Just go for 35-40 NM, with 4 bolts you can't go wrong.

[@theoriginalchefboyoboy6025]

could you have measured the Nm when you were disassembling the plate? And I think your deserve a Project Farm Special Commendation!!!

[@enginord]

I think I did measure the torque, but it was inconsistent. Also releasing torque for a fastener will be different than a tightening torque. Similarly as pushing something uphill, or pushing it downhill.

[@walterdunnett1091]

What is the part number for this housing, ty

[@enginord]

Walter. I'm not sure about the part number, it's shown as #16 cover on the diagram. you can send them an email to [e-mail]

[@Phiyedough]

It is 343201302050

[@walterdunnett1091]

@@Phiyedough thank you very much. So far there not a available thru the company. Months they say.

[@jeffalbrecht8290]

OK works most of the time but now it just hums

[@enginord]

if the motor is spinning and it's not moving the ram the bypass valve might be the culprit. if the motor hums but does not spin then the start capacitor might be faulty

[@jeffalbrecht8290]

@@enginord thank you. I will check the capacitor.

[@Trackhoe075]

Way way to much info for the average guy such as myself Wasted value

[@enginord]

Sorry buddy I wasted your time. Hope you can find more interesting channels.