Simple Table Saw Lathe / Conical poles can also be made / DIY Woodworking

[@JedediahSmith342]

Love them birdies on the background ⛩️🎏🙏🏽

[@maryastorga330]

Felicitaciones eres muy creativo , lo haré ,saludos desde Chile

[@YASUHIROTV]

Gracias. Desde Japón.

[@marioalbertolopez4482]

Te pasaste con la plantilla para redondear madera Buenísima 👁️💡 Un abrazo desde Tucumán norte de Argentina. Hasta siempre si Dios lo permite.

[@YASUHIROTV]

Gracias. Este es un vídeo de Japón.

[@hollt693]

The ability to tilt the axis of the stock in order to create conical forms is clever! It makes me want to see what you could do with even more degrees of freedom. If you could rotate the whole assembly relative to the saw blade (like you'd do with a miter sled), you could cut some interesting concave elliptical profiles. It might be tricky, however, to keep the blade from colliding with the jig.

[@estebanmasilli8512]

Muy bueno. Realmente me encantó. Y si compartimos la plantilla más . Fuerte abrazo gracias por mostrar

[@YASUHIROTV]

Gracias.

[@flojotube]

You gotta be kidding me... This is WAY UNDER-WATCHED & UNDERRATED... I think the TITLE & THUMBNAIL need to be reconsidered for this to become yet another multi-millions viral video. I believe this can be adjusted without sacrificing your current views.... My opinion: the thumbnail DID NOT make it clear to me that I’d be learning to create an actual LATHE (or lathe-like device) and the title did nothing to clarify this confusion. Therefore, I hesitated to click on this video, and something tells me other people are doing the same. It’s difficult to explain in a comment instead of verbally or visually..

[@flojotube]

For the title, I think your focus needs to be on the fact that this is a DIY *”WOODTURNING LATHE”* as your baseline, and adjust it from there - meaning find a clear & clever way to explain that it is actually a “table saw lathe”... I would REMOVE the bit about “conical poles” completely. Let your thumbnail show this, OR just let your video speak for itself. That being said: The thumbnail needs to SHOW MORE... The first idea that came to mind was to portray your rectangular wood workpiece and then an arrow to the various shapes you can turn them into using your lathe (this is where you’d show off the conical pole and others) - this is INSTEAD OF hiding the finished work off to the side of your inactive lathe (which overpowers the thumbnail, yet fails to explain anything!) (which, btw, is really the entire challenge here).. More to say...

[@robertoferreirademello2432]

TOP de mais ➕ Parabéns pelo trabalho. Ótimas dicas. Ficou perfeito. Boa noite. Ótima semana. Abraços brother. Falando de São Paulo Brasil 🇧🇷🇧🇷🇧🇷🇧🇷👏👏👏👏🤘👊

[@mr.mickles]

I need one that can do 6 feet. Wonder how practical that would be.

[@めしぬき]

これさえあれば、自在に簡単に丸棒作れますね🎵 アイデア豊富でうらやましい～…(笑) CM入れないのも見易いですね👍

[@YASUHIROTV]

動画を見ていただきありがとうございます😊 とにかくすぐに丸棒が作れます。サンドペーパーもかけやすいです。 動画の途中のCMは、たしか８分以下の動画だと入らないと思いますよ。

[@beleoil]

Muy buen trabajo ,una pregunta donde se puede comprar la abrazaderas verticales que sujetan la madera

[@YASUHIROTV]

Gracias. Lo compré en Amazon.com en Japón. Abrazaderas de palanca CORTADORA TRANSVERSAL Fabricante: E-TING producto: GH-301AM Abrazadera de palanca larga Fabricante: Utoolmart producto: GH-101-D-15

[@RimlaRob]

Aí que eu me refiro. Simples, prático e eficiente. Maravilha. Parabéns!

[@alexnightflydance]

Ich bin Schreiner und selbst sehr kreativ im Umgang und Einsatz Meiner Werkzeuge aber auf Diesern simblen Trick währe Ich nie gekommen 😎... Sehr gute Inovative Idee, Leider so in der Form in Deutschland nicht erlaubt und eher für Profis da hier viele Azubis schon mit dem Akkuschrauber defezite haben🤣😁

[@hemlock40]

Is it reasonably possible to make this jig longer to make a 60 cm long round bar? Or is it going to get tippy at the beginning and end of the slide?

[@PatrickMacLachlan]

You are a genius and a poet

[@josecarlosgarcia9099]

Eu não conhecia esse tipo de torno com uma serra circular de bancada. Gostei muito. Parabéns e obrigado por compartilhar.

[@YASUHIROTV]

Fico contente por ouvir isso. Obrigado por ver o vídeo.

[@sebastiannix5033]

The first time I saw a "hack" which isn't only a death trap. This on is a clever and useful death trap 😅 Come on, detachable hardware turning next to a running blade. A non-fixed wooden sled pushed by hand. All of that for moving wood sidewalks against the saw blade. I have to build that 😜

[@vuihoctienganh-benconmoing1499]

perfect, no more words

[@OscarTorres-mi9pb]

Eres un genio saludos desde Mexico

[@inspiringbuilds]

Creative and handy. Nice work from a fellow content creator. Liked and subscribed! 👍🏼

[@YASUHIROTV]

Thank you very much!

[@even1007]

感謝分享，非常好的主意！謝謝！

[@eksorteksort]

Keterampilan yang sangat bagus, rekan-rekan👍👍

[@YASUHIROTV]

Terima kasih👍

[@gioacchinoferrantelli9902]

Sei geniale 👏👏👏🙋

[@osvaldojunior1984]

Muito bem mostrado... Great Job!

[@sefabuyuk3227]

Does it damage the blade of the knife?

[@gilsonsouza9718]

Muito bom! Valeu!

[@dalechangomaikolbraian8175]

Perfecto! Gracias

[@YASUHIROTV]

Gracias por mirar!

[@youtukang]

Good idea 👍✔️✔️

[@akiyajapan]

Very creative design!

[@amtiensinh8416]

Great! GOOD IDEA

[@saputracandra4203]

Good Job....

[@bastiansutopo9939]

I like this.. good working 👍🏆🔔✓

[@YASUHIROTV]

Thank you 👍

[@EliasGuzmán-s2t]

Gracias ,me puedes decir cuáles son las medidas

[@RobinsonAkatsuka]

Bom trabalho. Mas poderia colocar as medidas (o projeto)😞

[@januszdulewicz4253]

Tylko przyklasnąć.Nie trzeba być geniuszem.Pokazano nam jak trzeba myśleć

[@hansdegroot8549]

Thia is quite genious I must say. Thanks for sharing the video. How many times was the video sped up (2 times, 4 , 8 ?) What RPM is needed for the drill?

[@YASUHIROTV]

Thank you very much. I am playing the video at 2x speed when the material is 45mm square. I used a drill with an RPM of 2300. But I am not sure if this RPM is appropriate.

[@hansdegroot8549]

@@YASUHIROTV Thanks for your quick reply.

[@newmotta2303]

Muito bom parabéns

[@YASUHIROTV]

Obrigado.

[@Tukangkayu_ae]

Very good

[@YASUHIROTV]

Thank you!

[@oscarvalenzuela262]

muy bueno!!

[@josephforsyth7874]

This is very cool.

[@paulocaldas2390]

Quais são as medidas por favor?

[@eduardohenriquesouza6108]

Muito bom!

[@YASUHIROTV]

Obrigado.

[@chenjangshin2474]

Awesome!

[@pojokkayucraft635]

Nihon wa, doko ni sunde imasuka?

[@laerciodearaujo1]

Valeu!!!!

[@VadimBiliy]

👍👍👍👍

[@youtukang]

Thnks for watch

[@RaymesMendes.marcenaria]

😁👍🇧🇷

[@contetacchia4916]

Storce la lama, secondo me è molto pericoloso poi ognuno è libero di fare ciò che vuole sia chiaro

[@moritzbenkeltal]

@JonasWinkler Was sagst du dazu 😂

[@zprau1541]

В чём проблема токарный по дереву с металлолома собрать? 😂

[@xianghe9877]

牛逼

[@abdolalighalavand240]

♥️آفرین🔩🙏

[@jul371-y5p]

this will fuck up the blade and the axis of the motor saw

[@michaelvoronov5716]

Ибо та