Making a Wooden Ball Joint | Japanese Woodworking

[@al145]

Man's jigs are better put together and neater than some of my finished projects

[@mikewelch3903]

His jigs are why all of us can have better projects. He is one of the best of the best!

[@Madh2011]

天才！　DIY系KZbin Channelの中で、このチャネルが最も勉強になります。いつもありがとうございます。

[@barry.w.christie]

There are many ways of cutting a sphere in wood, this is one of the more complicated methods I've seen and I think it's absolutely fantastic 😁 ... I thought it was quite limited in the size of spheres it could produce until I realised that the router could be moved up/down, thereby determining the diameter ... love it 👍

[@dieterjosef]

I think it is not complicated but rather easy. It takes some effort, definetely, but you can easily understand how it's done and you can build the jig by yourself, and it prohibits further mistakes and failures.

[@barry.w.christie]

​@@dieterjosef Spinning a piece of wood on a lathe and pushing a holesaw into it is far simpler, easier to set up and quicker to cut .... which is why I said this is one of the more complicated methods I've seen, because it is compared to other methods ... but I also praised it in case you didn't notice!!

[@dieterjosef]

@@barry.w.christie I noticed the praise, and if you have a lathe it's easier, yes. But if you have to build something like a lathe first... If you had an idea how to fix a piece of wood so that it can be rotated by hand you could put the router in a fixture that can do a circle. I think that would be easier all in all and could be used in different ways in the future.

[@hdvictoryford5329]

So many who watch these videos are so impressed by what they see. These are basic carpentry skills that just about any American carpenter car do. I have worked with many over the years who have done this and more. Nothing special. And I think I learned to make similar joints on the job with an amazing American carpenter. The thing is he never saw a need to take pictures of himself doing basic work.

[@barry.w.christie]

@@hdvictoryford5329 ​ Jesus, who pissed in your breakfast? There are millions upon millions of people, not just Americans (although I appreciate it's harder for you lot), who can cut wood, make joints, make jigs etc so nothing special! This guy has made a jig which he thought others would find useful and he shared it, in the hope that others would find it useful or even inspire them to create their own version ... a fact borne out by the number of views and (positive) comments. An old adage .... if you don't have anything good to say then don't say anything!

[@Arrogan28]

Honestly with all the horrible 'hack' videos that are out there on social media now, coming onto your channel by chance is really like finding a pure refined gold on out of the blue. Really great videos, great ideas, and nice to see some safety being considered, etc. All just execellent. I can't imagine your work is not going to help many craftsmen... new, and experienced both....

[@kinbolluck476]

I love nuts

[@85hako49]

なんだこりゃ？天才か！こんな玉作りの治具初めて見ました。スゲ〜。

[@trollenz]

When you see "Japanese" in the title you already know it's gonna be the absolute best you could possibly achieve 👌🏻👏🏻

[@Dmitry9331]

Я был удивлён два раза) способом изготовления шара и когда я увидел что в конце вы сделали такой технологичный фиксатор))) благодарю ) Привет из России))

[@N.E.C]

ты по этому и удивлен-потому что из расеи....

[@Dmitry9331]

@@N.E.C чё ты хотешь этим сказать ? Если бы я был из белруси то не удивился бы?

[@USER-HU-UZER]

Здравствуйте. Дело в том, что РФ на данный момент является страной отсталой во всём. По этому россиян всё удивляет

[@Dmitry9331]

@@USER-HU-UZERЗдравствуйте ,наврятли мы всему удивляемся как вы себе представляете. Такое видео могло быть снято в России лет 20 назад ,здесь нет каких то высоких технологий .

[@USER-HU-UZER]

@@Dmitry9331 Возможно я недостаточно точно выразил свои мысли. Google Translate работает для меня.

[@shane555]

This channel (and JSK) are my absolute favourites 😊

[@kaboncho]

Idem I ❤ yours

[@workshoppojokpamulang9961]

Yessss, agree

[@mason.berlin]

Me too. Just awesome.

[@MaxMut.]

You know what your talking about”

[@flowerchildtokyo]

Same!! and Ohyo56

[@robv.7864]

I would be happy to have just 20 % of your tidiness in the workshop. Mine is usually a mess no matter how often I clean.

[@fatehdebbah]

Japanese worshop is lie a temple .

[@waynenickoleff9041]

Hi Yasuhiro, Your thought process and creativity is quite amazing! I always look forward to your notifications when you post a new video they are always well executed.. Most importantly, thank you for taking the time to make them and for sharing your creativity. An inspiration and a pleasure to watch! Take care, Wayne

[@ЕленаБабанина-м1ф]

Достойное и поучительное видео! Спасибо! Я столяр краснодеревщик, а этого метода не знал! Браво 👏

[@240619721000]

К сожалению, 90% комментов от россиян- это совет автору купить токарный... Это либо от людей, ваще не в теме, либо пишут прожженые токарЯ, вот тока и ИМ невдомек, что МЫ без токарки- смогЁм, а они без нас- тока тарелки, блюдца и прочие шишки... )))

[@arsmargrach8037]

@@240619721000 Вам самому бы быть в теме - половина токарных приспособлений как раз рассчитаны под фрезер ))) - причем тут прожженность??? Данный метод более современный так как вначале был токарный станок а потом уже фрезер - и да... иногда у людей кроме простенького кромочника банально вообще нет никаких инструментов и уж тем более станков - так что такой вариант в первую очередь для них :)

[@xyzperic1462]

Sig Yasuhiro, La seguo dai primi video. In assoluto il mio canale preferito. Complimenti....Resti così.

[@Denis_Gomozov]

Многому у Вас, учусь, маэстро! Вы мастер!))

[@andrejshamin1452]

Нравятся аккуратно сделанные приспособления, с удовольствием ставлю лайк👍

[@タマラ-d8m]

何も分かりませんでしたが、とても綺麗でした！

[@YASUHIROTV]

ご視聴ありがとうございます。嬉しいです。

[@taxivideo]

Je ne me lasses jamais de regarder vos vidéos. Toutes géniales. Merci beaucoup.

[@ematise]

Wear protection goggles and respirator filter half mask with silicon airtight seal around the mouth and nose. All kinds of particles getting into the lungs are dangerous in long term. Really nice idea! Subscribed! 😉

[@user-BSI_spb64]

Конечно проще изготовить сие изделие на токарном станке или купить фабричное, но в данном видео главное не конечный результат, креативность и эстетика процесса! Браво МАЭСТРО!

[@АйдерЭрисмамбетов]

Да , времени убито немало, а не проще ли купить такой механизм там где покупал телевизор? Цена 2 тыс.

[@240619721000]

@@АйдерЭрисмамбетов Дофига лет назад ребят в начальной школе на уроках труда учили делать табуретки. Из дерева. РУКАМИ... ИДИОТЫ!!! Табуретка стоит копейки, зачем было мучать пацанов??? Математика- тож отстой при наличии калькулятора... Но потом пришло время ЕГЭ, и все встало на свои места, что и подтверждают комменты под данным роликом от РОССИЯН.... ОНИ САМЫЕ умные, как минимум- советуют автору прикупить токарник!!!! Ой, мля........

[@joelitonbezerra1235]

Simplesmente extraordinário, parabéns!!! E obrigado por compartilhar!!!

[@BasementBear]

I like it alot! For flexible movement of anything that needs it, nothing can really beat a ball joint, and it looks so beautiful in wood. Thank you for all your great idea videos.

[@hdvictoryford5329]

So many who watch these videos are so impressed by what they see. These are basic carpentry skills that just about any American carpenter car do. I have worked with many over the years who have done this and more. Nothing special. And I think I learned to make similar joints on the job with an amazing American carpenter. The thing is he never saw a need to take pictures of himself doing basic work.

[@BasementBear]

Coming off a bit arrogant there, and I have no idea why you answered this on my comment, I didn't even say impressed. But since you did, then no, this is not basic work, and no, just about any carpenter can't do it and won't do it, and it is really strange that you specified American twice. And good for you meeting other people you can brag about, but I don't see how sharing a process makes any "basic work" less valuable. In general you need to check your own value system.@@hdvictoryford5329

[@andi.popescu]

@@hdvictoryford5329 ok boomer.

[@leonardoscavo4010]

.....fai perdere la testa 🤯. Sei un vero maestro. You are very master!

[@YASUHIROTV]

Sono felice di sentirlo dire.

[@RichMoore-tweakin7376]

I'm glad I sat and watched the whole thing. And I agree there's easier ways to do a sphere. The craftsmanship was absolutely amazing. 🔥💯

[@hdvictoryford5329]

So many who watch these videos are so impressed by what they see. These are basic carpentry skills that just about any American carpenter car do. I have worked with many over the years who have done this and more. Nothing special. And I think I learned to make similar joints on the job with an amazing American carpenter. The thing is he never saw a need to take pictures of himself doing basic work.

[@Skunkanoid]

because not everyone looks at exactly what carpenters do, or have no basic knowledge on the skill. just let people be impressed by the craftsmanship and go make yourself a chair or something, geez@@hdvictoryford5329

[@YTCL888]

Your wooden ball joint creation is truly remarkable!

[@barsoom43]

So cool.. absolute genius.. Thank you for sharing your ideas..

[@davidpretorius2984]

End result was brilliant, the method was even better...

[@edo9776]

I'm glad i have found your channel. I'm a carpenter myself, but I had no idea what other possibilities there were for woodworking. Thanks and keep it up!

[@denisenunya7054]

I appreciate a person who works in a trade and admits he didn’t already know it all. My ex could never do that, but then he couldn’t get how to use a staple gun properly to make it go in straight. Used to drive me crazy!

[@denisenunya7054]

@@Spencer-e2v In any trade there is always more to learn. Always.

[@YASUHIROTV]

@edo9776　Thank you for the encouraging feedback. We will do our best to meet your expectations next time as well.

[@clauslangenbroek9897]

Thank you very much for the great inspiration. I gave a sub only a few seconds in and I believe it is well invested after I have seen it whole. Thank you, again!

[@saebsaqer]

This is absolutely Extraordinary !!!!!!!!!!!

[@jorgetxjr]

Some technics are so elaborated that sounds like a magic!

[@petergreening4810]

At the present time I do not have a workshop. Hopefully sometime in the next few years that will be rectified. That being said I subscribed after just this one (first) video, after all I can still learn ideas even if I can't practice the process.

[@Alleycat___]

Leonardo da vinci would be proud of you, and learning from you. This is unreal....

[@boblordylordyhowie]

Absolutely brilliant.

[@YASUHIROTV]

Glad to hear it. Thank you very much.

[@gedreillyhomestead6926]

Well executed jig design. I think I would have gone the lathe and holesaw route to get something similar. 👍

[@YASUHIROTV]

Thank you for watching and for your feedback.

[@bradleytuckwell4881]

I hope you realise how brilliant you are. You are a master at what ever you put your hands on.

[@hdvictoryford5329]

So many who watch these videos are so impressed by what they see. These are basic carpentry skills that just about any American carpenter car do. I have worked with many over the years who have done this and more. Nothing special. And I think I learned to make similar joints on the job with an amazing American carpenter. The thing is he never saw a need to take pictures of himself doing basic work.

[@seputarwoodworking9540]

Perfect woodworking,with xtraordinary results

[@grin4it]

Какая высокосортная фанера! Спасибо за видео!)

[@Владимир-в2г9я]

Очень оригинальный способ изготовления шарового шарнира.

[@justinnin05]

Well, I really like your gigs and ideas... but the TV at the end, that's a bummer. Great work! (bad application) I'm subscribing!

[@ayobikindewek]

WOAOU... Absolutely Brilliant... 😊🙏🙏🙏... 5:30

[@YASUHIROTV]

Cheers for checking out the video

[@jemo_hack]

great jig, and thank you for sharing!!

[@بنعلي-ق2ظ]

What’s incredible idea 😮 Congratulations for this application ❤

[@evennorthug2585]

A joy to watch! Triggering creativity. F ex a height adjustable, 4-triangle piano stand.

[@damianbennett1214]

yo, i think i just learnt how bedposts are made. holy crap, this machine is amazinggggggg!

[@lint2023]

Very nicely done!

[@YASUHIROTV]

Thank you for viewing.

[@TechFreezeOfficial]

Amazing video. We would like to show this video on our channel with your permission. We will add your link and your name will also be mentioned in the video. Let us know what you think

[@andrebartels1690]

Wow, this is beautiful artisan work.

[@andreaskloprogge4172]

So easy and so good. Nice Video

[@luciferlord3118]

Мне кажется, что такие работы проще и быстрее выполнять на токарном. Но стоит сказать, что токарный, даже самый дешевый китайский по дереву, не каждому по карману. А если есть фрезерный, почему бы его не использовать. Очень приятно видеть, аккуратную и опрятную работу

[@drinya88]

Man has invented a wooden ball joint!

[@lollipop98733]

excellent Jig and could possibly be converted as a small telescope mount 👍

[@ferdinandbasques7715]

ENCORE UNE FOIS QUELLE MAITRISE.. QUEL BEAU TRAVAIL. SUPERBE.. PRISES DE VUES MAGNIFIQUES.. FELICITATIONS.👍👍👍👍👍👏👏👏🙏🙏🙏 UN BRICOLEUR MARSEILLAIS

[@onehandedmaker]

Such an interesting video. Well done. One Handed Maker

[@YASUHIROTV]

I'm happy. Thank you.

[@SergeyKostukov]

Спасибо, очень интересное изделие и смотрица отлично!

[@ShuRugal]

Ah yes, the traditional ancient Japanese router.

[@ZeEingozuBa]

Zoragarria. Zorionak kanal bikain honengatik!!! Congrats from Basque Country.

[@YASUHIROTV]

Thank you very much.

[@FrankTranDesign]

You are my hero (and JSK too)

[@aimaryuni2934]

Ini adalah sebuah karya hasil dari pemikiran yang luar biasa...tak mudah untuk ditiru..pantastis

[@inoplanetyanin1]

Выглядит красиво и надёжно. Но, я такое не смогу повторить. Хотя, кому-то очень нужно. Спасибо. Даже просто посмотреть на работу и результат было интересно.

[@Celticshade]

Thats an interesting jig. Clever.

[@ВиталийРогачёв-д1н]

Здорово, необычно, спасибо за совет.

[@hassanelnaggar1985]

رائع يا عزيزي 👍

[@nonoche90]

Great technic, many thx for sharing!

[@Alim_Hapov.]

Honestly? .. carpentry masterpiece

[@1992jamo]

Absolutely awesome! How to make a Wooden Ball Joint: Step 1: Build 2 axis gimbal milling machine...

[@eddiechia2611]

Brilliant, Brilliant work

[@franciscojaque9777]

Muy práctico, gracias.

[@southern_merican]

I love simplistic ideas

[@nikkarel515]

wow! just amazing! Keep it up.

[@ДеревяшкиИВкусняшки]

Красота! Любо дорого смотреть.

[@josecruzgarcia3107]

Grandioso maestro por compartir ese conocimiento mire que hacer una esfera tan perfecta Bendiciones dónde quiera que encontré

[@HHH-yy3cy]

It is so simple. All can I do in our kitchen...

[@izaacprimoezekieroque8512]

Amazing talent good job sir godbless😊

[@ksaenable]

0:04 thanks for reminding me to make a dentist appointment

[@sergeduval1391]

Tout simplement génial 👏

[@yesno8204]

I love it. There is a Dremel Tool Vise that has the same design. Nice...

[@YASUHIROTV]

Thank you very much.

[@ЕвгенийКостенко-д4ч]

Amazing job. 👍👍

[@matata127]

Daaaang!!! Very nice

[@krsanth-4142]

I was thinking what you would use it for until the end. If you had an older 'real' wood desk, making a stand like that might look better, and be sturdier that someone the metal ones out there.

[@stevenjolley430]

Very clever.thank you 🙏

[@simondsz]

mindblowing and nice idea

[@MForMaker]

amazing😄😄😍😍

[@gerardoramirez2889]

Impressive work! 👍

[@primaxwell00]

Awesome great master👍

[@bigmechanics]

Great mechanism

[@vijaykumarsubramanian3442]

Good one. The ball should not be smooth so as to ensure that it does not slip.

[@shroomatic]

wow. this is stunnig.

[@creativetdt23]

beautiful❤❤

[@constructionplans4272]

wonderful

[@hdvictoryford5329]

So many who watch these videos are so impressed by what they see. These are basic carpentry skills that just about any American carpenter car do. I have worked with many over the years who have done this and more. Nothing special. And I think I learned to make similar joints on the job with an amazing American carpenter. The thing is he never saw a need to take pictures of himself doing basic work.

[@aikiiai]

If it's nothing special, why do you bother commenting?

[@StariyBashmak]

Неожиданная концовка. Я думал, что это будут детали стола или детской кровати. А оказалось, что это мобильный шарнир. Было интересно наблюдать за работой. Спасибо.

[@akhtarnadeem621]

Very Nice !!

[@Bearin181]

Да, геометрия прекрасная наука. Всегда что то новое узнаю

[@SharpenedEyes]

INCREDIBLE!!

[@fabuloso5938]

ok, this is pretty cool

[@Jul220289]

Así que así hacen los cabeceros de la cama!! :O Gracias por la información, la verdad es que es muy curioso ver el proceso

[@1misticointolerante]

Te Han Imitado....pero jamás igualado......😎🙏🙏🙏

[@gmendes1831]

Very nice!

[@merrylm6276]

simply brilliant.👏

[@StopGravity]

素晴らしいですよ。

[@harmonipan-bt1dm]

👍👍👍👍 Absolute 1A Handwerksarebeit 👏👏👏👏 Ein hervorragender Schreinermeister !!!!