YD100 and Zeda 80 Engines for Sale Now Online

www.southerncustomcc.com/engines
Zeda YD100 and Zeda 80 Triple 40s engines now available for sale via online at competitive NOT HIGHLY MARKED UP CORONAVIRUS PRICES!!! You are a builder like me and deserve a good engine at a good price! Check out the website for more details and specs.
Thanks for watching, and be sure to like and subscribe. 😎👍

[@dekem7137]

Can't wait to get my hands on that Zeda 80. Looks awesome Mark!!

[@ooolalamaam7429]

Deke M it is a great engine. Really enjoying mine that I installed this weekend.

[@sanesaint8725]

You can get the gas tank that screws over instead of inside so it don't leak on AliExpress app 20 bucks

[@sanesaint8725]

A chain guide drill a hole through it through your bike and bolt it so it will not move at all

[@sanesaint8725]

I bought a NGK cap to put on my CDI

[@perpj0543]

I'm trying to buy the yd 100 and it says shipping not available when I look at the engine in my "shopping cart" EDIT....I continued on and the shipping was automatically included. I'm not sure why it said shipping not available. Kind of confusing but it all worked out. I'm excited to receive it!!

[@SouthernCustomCC]

Cha He : Thanks for your purchase! You are the first online customer for Southern Custom CC! 🤘😎🤘. Shipments will begin May 18th. Thanks and come back and shop with us again.

[@sanesaint8725]

Dope over tighten your gas tank they will split they only welded on

[@sync7512]

Is it the Zeda 80 motor the same thing as a triple 40 also how can you tell ?? Thanks love the video

[@SouthernCustomCC]

Thanks for watching! The Zeda80 was a step up from the Pk80 due to some differences such as piston hole height and rod specs. What separates the Zeda80 from the Zeda80 triple 40 is that the intake manifold holes are 40mm apart (giving ability to make intake wider), the exhaust port is round (giving more release), the stroke is 40 (giving better compression), and finally the front engine mounting U is more open and fits bigger frames. Hope this info helps! Happy building.

[@maddoxwarner8057]

Can I get a link to the zeda 80

[@joneserupinsmoke9161]

Yd 50 mm piston rite?

[@meanderingmike7640]

I like to run jackshaft kits for a bit more top end speed, would you prefer the zeda 80 with a dio reed valve and oko carb or the stock yd100? I weigh roughly 170 and im more looking for top speed than i am torque since it doesnt take much to pull me

[@codelicious6590]

You still got Zeda80 triple 40mm? Ok, I see that's all you have left BUT, do those Zeda80s have the Zeda80 stamped connecting rod and 40mm stroke?

[@codelicious6590]

I apologize- I see the Zeda YD100s arw actually in stock as well. Sorry bout that.

[@SouthernCustomCC]

Swampbutt Stinson: No problem! Happy building

[@joserioux7700]

I just realized you guys are selling that thing separately because whenever you buy an upgraded kit it comes with the original and the upgrades I don't think that's cool like if you buy a stage 3 or 4 it comes with the factory Muffler and the souped-up chambered banana pipe it comes with the factory CDI carburetor and it also comes with the modified CDI there racing carburetor and thigh high compression head so that that's all parts that people pay for that they are not getting extra

[@ryanshaw4930]

Are the yd100 and zeda 80's on sale right now the firestorm editions?

[@SouthernCustomCC]

Zeda80 is $139 + free shipping and YD100 is $169 + free shipping.

[@davidborges6361]

Will this fit in a 20 inch stingray?

[@SouthernCustomCC]

Thanks for watching. The yd100 definitely will not. The 80 will fit it you hacksaw about 10mm of the rear mount spacer and you use a shim in between the engine and the rear mount. Also, you’ll need an offset intake. Other than that…it should go on smoothly. Happy building.

[@davidcox2144]

How do i buy a set of piston rings 50mm piston

[@matthew27lamb31]

Have u put a 79cc predator on a kent bayside someone said it will not fit

[@SouthernCustomCC]

I haven't tried, but I agree...it won't fit due to u straight bottom bar. Make sure you use a good, steel framed bike as well! Happy building 👍

[@lsdemon7773]

Is there a huge difference between the two?

[@SouthernCustomCC]

There is actually. The Zeda 80 is an all around useful, base motor that is the hot go to for most enthusiasts. It is also highly upgradable. The YD100 has been on the market for less than 1 year and has torque that will please any person over 200 lbs. It will pull from the line and get you up a hill no problem. It is not as upgradable due to the single piece cylinder, but it can still be upgraded for top speed without sacrificing the low end torque and not spending as much money doing it as compared to the Zeda 80. Very simplistically... the YD100 is good for torque and the Zeda 80 is good for top end. With that said, both are considerably fantastic performers for only having 1 piston smaller than your fist! Happy riding, and thanks for watching.

[@123hoodnig]

Wich engine do you prefer?

[@SouthernCustomCC]

To be honest, I am not a ’how fast can it go’ type of guy. I like to be ale to have the torque when I need it and I like being pulled up hills without having to pay a lot of money on upgrades to do so. Thus, my answer would by yd100. BUT I do like upgrading and customizing the engines that I do also like the Zeda80s as well. I am sure you will get the one that is best for you, and I am sure you will enjoy it! Happy building.

[@andylogan3016]

does the YD100 contain a 44 tooth sprocket

[@SouthernCustomCC]

Yes, it does

[@tiagodinis5657]

When are you going to make the “pimp my 2 stroke engine kit”?

[@SouthernCustomCC]

Sorry!!!! I have been busy with builds and setting up the online sales. I’ll get to it very soon! Thanks for the support!... teaser... there will be a dio reed valve 🙊

[@tiagodinis5657]

👍😯😯

[@sanesaint8725]

I got my 100 cheaper than the 80 goes for

[@SouthernCustomCC]

Cool! Happy building and thanks for watching!

[@derekyahir6734]

How much it cost shipping to Puerto Rico I cant entry to the website

[@SouthernCustomCC]

I'm sorry. I cannot ship to Puerto Rico at the moment. I am setting up USPS agreements. I'm sorry. Check back soon!

[@derekyahir6734]

Okay I still waiting for don't worry bro

[@azizarain2151]

Paric

[@wilfredlinares9755]

Where are you located or send me the website thanks

[@SouthernCustomCC]

: www.southerncustomcc.com/engines

[@sanesaint8725]

AliExpress app

[@JamesPiccone]

Damn my comments get ignored, thanks

[@SouthernCustomCC]

James Piccone : Hi James! What comments? Maybe they are down the list or maybe I have already replied. If you ever have a question, just hit me up via email if I don’t answer it here, and I will get back to you! Thanks for watching

[@JamesPiccone]

@@SouthernCustomCC it's cool, thanks

[@sanesaint8725]

179 what a joke