Yes lets put some Hertz Mille's in your Chevrolet Silverado installer Diaries 160

[@mzondi1970]

I was an installer and salesman and iasca an alarm from some of the Giants in car audio like Richard Clark the only thing that blows speakers is distortion or just directly sorting them out

[@214puppet]

Man I wish you guys uploaded install videos everyday! I love watching them!

[@UKSportsFan]

Just had these exact same speakers (Hertz MPK 165.3 and MPX 165.3) installed in a 2016 Accord along with a Kenwood DNX994S. Sounds great! Next up, installing an Audiocontrol LC-4.800 amp!

[@randomtoyotadude8952]

I love you guys working.. can look at u, never gets tired(hihi)..

[@btcruiser31]

amen on the gloves, i didn't when doing mine and afterwards noticed I had 18 little cuts on my hands- those edges are really sharp

[@berto928]

Dynamic Duo to the rescue again!!! You guys are making it really hard not to bring my car all the way from Michigan...all of a sudden my OEM system just sounds so flat and lifeless😞

[@Martin-gz4qn]

I love Hertz. I have their 3 way Mille system in my car and love it. Incredible sound.

[@Martin-gz4qn]

@Sonny Valentyne In my opinion, yes. I have not heard the Flax 3 ways. I can only compare them to the K2 which is what I was going to buy before I heard the Hertz.

[@JosephNnbs]

This customers truck is fricken nice. I have the same truck but the red seats and black carpet and trim is exactly how ive wanted to do mine. I'd love to drop mine off to you guys. You do some really clean work

[@marvo_4sho901]

You guy are the best at what yall do !!! Whis I live near.

[@shonsberge]

Request: whole video dedicated to sound deadening, especially around that speaker bracket!

[@jonblakk73ab]

Man the music was giving me super life I’m at work grooving not even watching the video

[@thekustomknight2264]

There energy series high energy are black cone like hsks . They are entry level with very harsh tweeter but the mille pros are Amazing have them in my kluger off a focal fps amp with alpine type r sub

[@Cubik303]

“If you want to retain your fingertips” lol

[@rlui0514]

Can you guys talk about component systems on your next live show? Need some direction on tweeter placement for the rear deck. Thanks keep doing what u guys do

[@supervette9953]

good tip with the gloves, I worked on a door and cut the heck my hands didn't know it till later was razor sharp 18 cuts in total.........learn from Dean wear gloves!

[@YTSTK89]

Been a while since I watched a video. Good stuff!!!

[@myboy051]

NICE !! I have a 2008 Chevy Silverado 1500 vortec Max. Ive been trying to decide if the MLK 165.3 milli legend is worth the extra $250 over the MPK 165.3 MILLI PRO’s . I’ve been on the fence for almost a month now. I’m going to use the same rear coax speakers In my truck also . Im running a JL slash 450/4 amp to run them .

[@mikeodell5915]

I need a shop like yours in houston

[@lawsonfan5797]

Noob question.......when installer was checking polarity he said he had green all the way and yet I saw the red go off. I'm going to go ahead and assume it's supposed to do that, I'm just wondering why.

[@Oscar_Hdz]

Possible beginner’s question... but why do you set a 5 or 10db on the amp? Is that just for the highs amp or for the bass amp too? Last question lol when do you want to use either a 5 or 10db? Thanks a lot guys!!! Great install.

[@Ghost_R6_]

Dude. I only wish that there were installers of your quality in my area. And also it blows my mind that I take such pride in my vehicle. And these yahoos that bring their cars to you guys are always sitting on Factory hubcaps or dirty or the insides full of junk LOL. Never would I ever take my vehicle to get stereo equipment installed without it being customized in some way and completely immaculate. It's like going to the dentist without brushing your teeth for a month. It's like getting a boob job then wearing nothing but sweatshirts🤔🤔🤔🧐🧐🧐🧐🧐

[@amstaffmike80]

What in the world was going on with Dean's hair?? Lol another great vid!

[@michael_graper]

How beneficial is sound deadening the doors? Does it help with road noise?

[@denzilvarghese]

Can you put the product description in the info space? Amp Speaker sub like wise ?

[@Nixima81]

Hey guys one thing that pop into my head a few times watching installs, can't you software lock your head unit max volume so you don't blow you speakers?

[@mrmagic34]

Five Star Car Stereo what do you guys use to put inner door plastic liner back on door ?

[@edud8452]

on to the next one Fernando come on man😎

[@viper7353]

Where are you guys located????

[@brwnsfn]

Those look like the Energy line, not the Hi Energy speakers.

[@rubencampuzano7381]

So y did speakers blow? Costumer turning up to loud?

[@MikeInNorCal]

how do you determine how much roadkill to use?

[@noemartinez5111]

Thanks this is gonna help me ally when i sound deadeing my doors this weekend.i need those fast rings do they make a difference?.. alpine 6.5 components up front coaxial back doors. Alpine 300.4

[@frankthetankricard]

They improve the sound for sure but by how much depends on your car and equipment. Since the only downside to using them is the price, I'd say if your components are not the cheapest ones alpine makes then it's probably worth the money to add the rings. You can also get great improvements from sealing all the holes in your door with preferably rigid material to give your speakers a sealed enclosure. Even Roadkill works great for this. But this would mean ditching the factory vapor barrier and sacrificing easy access to components in the door when repairs are needed.

[@dracula4733]

How did u set da crossovers cuz u didn'T show how u set it did u use da smd-cc1 or how u do it..????

[@thomasgibbons2915]

Would love to have you two do my truck. Where are you located?

[@dracula4733]

Wat can i use to tune da crossovers on rockville 12" powered sub box I have it set at 80hz. By da radios crossover can I use a smd dd1 or cc2 to tune it if so how thanks keep up da gd Vidz ur da best only wish u wer closer to me den in florida

[@Pilot_the_Dune]

Set Lowpass on radio to 80 and sub to 80. If you radio has slope you can adjust that to your liking. If you want to set up distortion limits on the cheap, check this guy out. kzbin.info/www/bejne/onLRZYp9o95gnac

[@ELEV8EDNH8ED]

What disc do you guys use

[@Keith-hz9zd]

I have a 99 Escalade need to order parts from ya'll how can I get in touch

[@ppark2123]

Awesome!

[@randomtoyotadude8952]

Heryz mille plays Daimn goood

[@mikedale1142]

Nertz the World!

[@nanuq1977]

So why did the old speakers blow out ?

[@urielhernandez3286]

Who knows

[@MMIACSURVIVOR]

can anyone tell me what the metal tool at 8:16 is called?

[@bigbusa881]

How much would a job like this cost???? Also if you wanna know like me like the comment to show interest

[@UKSportsFan]

It really depends on the hourly rate that the shop charges, as well as how long it takes for them to get the job done. I've had shops quote me $65 per hour up to $95 per hour for installation work (not including any mounting brackets or parts the shop will create or use separately). Most of the time I've found the quotes are somewhere in the middle ($75 to $80). Also, some shops will put one guy on the job while others will have 2 guys doing the work, which will affect the labor time. I had basically the exact same work in this video done recently and it was around a 4 to 5 hour job at the shop that did the work.

[@andraealston8478]

@OneOfKind Leo I work at a shop and I can tell you now KZbin isn't the answer for everybody

[@Southmuzik81]

That component set alone is $500!! Edit: They are $383 on Amazon right now. But still that's pricey lol

[@tankdog03ify]

I run deaf bonce m60A 6.5s $149 a pair, along with a crescendo ft1 super tweet in each door on a deaf bonce aak-200.4 talk about loud and clear.. pro audio speakers can get loud without distortion.. my mids and highs are heard for blocks, love it.. a lot of people are starting to run pa speakers now, there cheaper and can handle lots of power

[@xtrakrisb420]

383 dollars for components isnt all that outrageous. maestro m class compenents are upwards of 3000 dollars...lol"they are the new mb quartz"

[@andraealston8478]

Listen to c5s from jl and tell me they aren't worths 600

[@trudeaumustgo1920]

Got mine for $200 canadian on clearance

[@balazsbukovics3569]

in bulgaria , the price just half!!!!!!

[@julioc3445]

You all you man D&F!!!

[@justingardner4555]

You can be out of polarity and still be out of phase.

[@astrazenica7783]

Poor Fernando. This KZbin crap wasn't in the job description lol

[@theaztecwarrior1190]

First 👍

[@xtrakrisb420]

There not worth it..JL used to be good..used too