Yeswelder CUT-55DS Sub $400 Plasma Cutter!

Is it worth the money? The answer is YES!!!
Check out YesWelder yeswelder.com/... use discount code MORFAB for 10% off of your entire order!
------------------------------------------------------------------------------------------------------------
Our Amazon Store: www.amazon.com...
My Welding Equipment
yeswelder.com/...
Everlast 255EXT Tig: amzn.to/2E9KOeV
Miller 211 Mig (New Ver): amzn.to/2X3PzOH
Optrel Panoramaxx 2.5 Helmet: amzn.to/2TVz5GB
Camera Equipment
Canon EOS M50 Mirrorless: amzn.to/2TO4U3W
GoPro HERO Session: amzn.to/2UWGcOX

[@allanhastillo2228]

I’ve been on the fence with this cutter for awhile. After seeing this video you sealed the deal for me. Ordering one now!!!! Thanks for the honest video!

[@D3RPZILLA]

Just ordered one... had (may still have) some coupon code for $170 off... code is CUTTER.. picked it up for under $300.

[@larryalexander4833]

I ordered one of the same model plasma cutters for work today . I want one for my home shop now . Gonna have to wait for a bit tho . Appreciate the review

[@garaldgingrich8409]

I got one like that too and got it out of the Box and it doesn't even work the ground cable is too big for the welder doesn't fit in so I'm not happy with it so far

[@d33psix88]

You’re just as easy to watch as Jimmy O. Not annoying just straight-forward and real. No BS millennial trigger-words. Sick! Dope! Stoked! 😣 Jimmy gets away with some of those with me because otherwise he has a likable personality. All of his friends, including you seem to be the same way. I think I would get along well with all of you. Thanks for the upload, keep ‘em coming!

[@MorFabIndustries]

Thanks man I appreciate that!

[@risk_immersed]

Good video bud. U have helped me a tonne as I have rebuilt my jeep tj's frame. Keep up the great vids bro... You are helping ppl.

[@videostellall]

I ordered mine on a Friday, ad got it the next Wednesday for $289! I haven't had a chance to play with it yet though, but I like my Yes Welder Tig

[@johnle1465]

thank you, I'm thinking about getting one based on your review.

[@jonny-b4954]

$465 now. ($322 with 30% off discount code) Love inflation. I got their MIG/TIG/FLUX/SMAW unit and it was only like $350. Runs great. I just don't like how the manual is clearly written by a Chinese person with broken English and has clear errors in it. Just like you noticed with the 220/55 amp thing. That's.... crazy in my opinion. But... I might grab this. I'd need to buy a large air compressor though. My pancake compressor would never shut off and probably not be enough.

[@mansaaron1]

It’s $380 on Amazon today (2-3-22)

[@jonny-b4954]

@@mansaaron1 Oh yeah? You can get it for $322 from YesWelder's official website with the 30% coupon code they have right next to the buy now button. So little cheaper. Then again $380, if you can use the 10% off promo code from the channel would bring you halfway to $320.

[@robertlaw8510]

Yes it works well, but I know that any CUT 50 plasma cutter can do the same. I do like YesWelder, I have one of their welders and it works great.

[@rubenc.4996]

just ordered this for 368 out the door with discounts im looking forward to using it

[@mansaaron1]

Good video and beautiful shop! I’m in the market for a plasma cutter and I’m wondering if you have a update on how this one is holding up. Thanks for the video!

[@rollorescue1582]

On summer sale for $298 + s/h right now. Just picked one up for $304 smokes.

[@tm55555]

Stoked

[@ClownWhisper]

I bought a hynade 3 in 1 plasma Tig atick welder with great skepticism I thought I was cutting 3/8 of an inch and I could barely get through it and I was getting pissed off it turned out it was .55in cold roll! That is 14 mm and I was all pissed off it's not even rated for only 10 mm and I was mad because I was in a rush and I grabbed something that I thought was much much smaller. I'm usually pretty good at looking at a piece of metal and knowing exactly what size it is I don't know what was going on other than there was some bevel on the edges that might have made me think it was smaller stock I don't know but it was bigger than half inch almost 14 mm just a tiny hair shy of 14 mm and I could barely get through it but if I would have worked on it for a minute I would have been able to cut it

[@ClownWhisper]

You want to make your cuts a little bit easier cuz it looks like you drag cut if you got a deburring wheel on one of your bench grinders which I'm sure you do if you own a shop taking smooth off your cutting head where the little Criss crosses are cuz there's always a little roughness there and it'll drag on that cold rolled or hot rolled or whatever so much better it's unbelievable night and day difference

[@jasonh4167]

Awesome i feel good about picking one up Second hand for 200$ cad.

[@jonrnas]

Update.. after 2 weeks and an email a day the only help I got was a picture of a finger pointing at a connector to check... When I asked them what to check with a meter or am I just verifying it was plugged in they replied "we have reviewed the video you sent us again and it's broken and can't be repaired, sorry.". Basically they just want to string you along until you get tired and give up. So now I have a paperweight.

[@down2earth838]

These cutters should always come wired for 220 volt ( with adaptor to drop to 110 ) you will leave adaptor in 220 one day and some idiot will think they can plug a 110 tool into adaptor. 💥

[@justsayin7937]

I put an amp meter on my Prime Weld CT520DP and it outputs 50.3 amps on 240v...

[@petar443]

Nice machine. I suggest you make tutorial on plasma cutting. 👍

[@jeffduncan2942]

Awesome review man! I'm a little concerned. I was about to pull the trigger and now that exact model is $249.99. I'm wondering how and why it's almost half the original price

[@markahdz]

I have been thinking on getting one, I haven’t use a plasma cutter before but it looks like its about the same like a regular cutting torch.

[@garypostell5268]

Impressive so far!

[@vwclub3]

Would love to see what it could do with just 110 seeing alot of guys that are gonna buy a cheaper plasma cutter are back yard guys that might not have access to 220

[@brentsmith5647]

Brilliant video thank u 😍👀👀👀👀👀👀👀👀👀👀👀👀👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@tonyozimek2116]

I just ordered one!!!

[@kevinmcgehee5557]

Great review

[@djfoxalaska]

Well done!

[@reidgilker4473]

Its rated for 1/2 inch and can severe cut 3/4 in,,, but maybe thats just the newer ones ,I see your video is two years old .

[@johnbailey9682]

Is this the no touch and a inverter style they make two of them but there different ?

[@stevenhamlin1015]

It's been a while how does it hold up?

[@wesmontgomery7092]

do you drag the tip with it?

[@DustinApple]

Anything you missed & would like to add? Yeswelder just sent me one to review & I've been watching A LOT of videos from folks who don't know how to run it. I'm going to put it up against some aluminum. Are you dragging that tip? Solid video bud.

[@MorFabIndustries]

I did some drag testing and it works but eats consumables like mad. Its best to keep a small gap or use a standoff so you arent directly on the material with the tip. The pilot arc is amazing it chops right through rust and rot with no issue. I have been beating this thing up from the day i got it running full 55A 3-4 hours per day without a hiccup. Run it 40-60psi and it should be golden.

[@DustinApple]

@@MorFabIndustries how did you adjust it to get the full 55 out of it?

[@MorFabIndustries]

@@DustinApple Run it at 220V input and max it out. Short circuit it will push 49-52 on average it runs about 39-45 amps continuous. Not quite rated power but for the price you cant beat it.

[@DustinApple]

@@MorFabIndustries appreciate the replies

[@hinds90]

Do you have a budget compressor you can recommend? Just ordered the cut55. Will be doing some cutting on 1/4" plate

[@garypostell5268]

Is there a drag tip on the touch?

[@mikemccollum5529]

Nice review. Thank you. Pure chinese junk. Mine was no good out of the box. Pressure gauge only reads 30psi. I don’t know whether I have to much or to little air pressure. Arc goes out after a few seconds. Yeswelder is putting unreasonable demands on me to fix it.

[@MorFabIndustries]

Oof sorry to hear that! Mine has been working flawlessly every day. I hope they get you taken care of. If not, shoot me an email [e-mail] and I can try to help you out.

[@BigfootTJ]

​@@MorFabIndustries glad I found this comment, I haven't seen any long term reviews but your video and comment at at least 8 months apart, so I'm definitely buying one.

[@jamesszymczak3992]

I have the plasma cutter 55 the knob on the amps when you turn to get to 55 amp can you still turn it around or dose it stop, and if you set the amps and when you turn it off and back on dose it save the amps or dose it go back to 55 amps? Just checking.

[@munawarsoomro8958]

Thanks for info and video. Just one question I can't get anybody to answer. Will it run and not burn out my 6 gallon pancake compressor or do I need to make room in my little garage and buy large compressor? I am a wood worker with welder wanna be. Thanks

[@karma8001]

U will definitely need a bigger air compressor

[@munawarsoomro8958]

@@karma8001 Thanks. I bought a used 30 gallon 5 or 6 scfm compressor. Thanks.

[@Uts9000]

leak? total POS... waste of money. Company does not stand behind the shit they sell and expect the end user to repair it. Right out of the box it did not cut. Buy at your own risk

[@bigk3381]

Thank you for your time in making this video. Just to clarify, on Yeswelders website it shows: "Max Rated Clean Cut Thickness: 5/16"@110V, 1/2"@220V" so I takes it by your video 1/2" is just a little far fetched? Thanks again

[@MorFabIndustries]

It will do 1/2" very slowly but I don't recommend it.

[@bigk3381]

@@MorFabIndustries Copy that 👍

[@anthonyestrada442]

U want to sell it

[@thomasmcgovern2431]

Great to see technology comes along,I have a snap-on plasma 30 unit,and it's a pilot arc unit,and yes they cut nice,3/8 is no problem,1/2 inch takes 2 passes,but yes price is a big issue if you are just getting started.Glad to see you on videos,was wondering about you lately,I've got my jeep project going,went a little more in depth,pulled motor and trans,pulled tub,built rack for frame support and am able to get frame squared up,keep up good work and yes parts are slow cause of the pandemic and democrats.till next time.

[@SuperUncleRyan]

Is the 55DS holding up?

[@MorFabIndustries]

Like a champ! Been over a year now and zero issues. I use it daily.

[@SuperUncleRyan]

@@MorFabIndustries Thanks for the response. I will be grabbing one soon.

[@vanessahigdon8194]

Thumbs up.

[@joebob7344]

Went to the link and the best price I could find was $459. And that’s with a 15% discount. Maybe I’m looking in the wrong place. Sounds like a bait and switch.

[@MorFabIndustries]

Since the posting of this video, the prices have gone up a bit. If you use my link and put the Cut55DS in your cart, you will see the price drop to $391.00 at checkout.

[@andrewhunter5843]

You should be able to get one cheap. I just ordered from Amazon in Canada for $389.00 CAN Total with tax $448 to the front door.

[@popshemi1]

@@MorFabIndustries Where is your link so I can order the plasma cutter?

[@cressmerrill2429]

Just purchased for $320 and added a bag of consumables for another $24, looking forward to cutting some metal.

[@jonrnas]

Rebranded junk! Lookup Keygree welders. Can be had for 150-200 all day online. This one is a rebranded Keygree 250 as far as I can see. I have a error 1 code on display. Units only been used for 30 min since ai bought it...They said out of warranty nothing they can do.. which I get.. however they also would not allow me to talk to support direct, only a call center. They also blocked my email when I tried to ask them about what part needs replacing or what error code meant... Buyer beware. Hope my incident was a fluke. Really liked the welder when it worked but feeling a bit hung out to dry.