Yiannimize to WhiteDetails. Ferrari California T - VLOG 052

In this episode: A Ferrari California T receives a multistage paint correction detail to permanently remove surface hazing, paint swirls and machine induced holograms (potentially factory induced) before loading the paintwork, wheels, exterior trim and interior with hardy ceramic protection.
Vehicle had been to visit Yianni and his team earlier that week to receive it's gloss black vinyl roof wrap - yiannimize.com/
AMDetails Clay Bar: tinyurl.com/zhj...
Detail Factory Brushes: goo.gl/KimQGx (use 'WD10' discount code for 10% OFF)
Compressed Air Can: amzn.to/2IZHZwN
---------------------
10% OFF detailing gear at UF Direct when using discount code “WD10” - bit.ly/UF-Direct
Receive early access to the VLOG and find exclusive Patron-only content by supporting WhiteDetails on Patreon for as little as $1 a month: / whitedetails
---------------------
► Links to my frequently used/talked about products
◦ Pyramid Ceramic Coating: goo.gl/TMxH8g (use code “whitedetails” for discount)
◦ Vehicle Dryer/Blower: goo.gl/Ff4gzT ('WD10' code for 10% OFF)
◦ Gtechniq I2 Tri-Clean: amzn.to/2QQwBuu
◦ AMDetails Clay: amzn.to/2zUzJMx
◦ Carbon Collective Platinum Wheels: amzn.to/2QtcIKH
◦ Detail Factory Brushes: amzn.to/2QKsRLf
◦ All Purpose Cleaner/Degreaser: amzn.to/2B7Ret4
◦ Auto Finesse Tripple: amzn.to/2BjvQ3F
◦ Menzerna 400 - amzn.to/2T9rUKl
◦ iBird 1"/2" Cutting Pads: goo.gl/96XAoU (use code “JWDP” for discount)
◦ Gyeon Glass: amzn.to/2C4Qaas
◦ Gyeon Bathe: amzn.to/2TgPzbX
◦ EZ Wheel Brush: amzn.to/2DOb0fF
◦ Bilt Hamber Auto Wheel 1L: amzn.to/2BFUKLz
◦ The Rag Company E365: amzn.to/2C4LuBa
► For the full list of my product recommendations for both the U.K and US including detailing kit, hardware and VLOG equipment, click here - goo.gl/2fNhwj
---------------------
Web: www.WhiteDetail...
Call: 07706 566622 / 01427 717696
Email: [e-mail]
---------------------
KZbin: / whitedetails
Facebook: / whitedetails
Twitter: / whitedetails
Instagram: / whitedetails
JimWD

[@tedlym.3390]

I really enjoy seeing a car that isn't black or grey being detailed to perfection. You do good work. Thank you,

[@MrNake96]

Great job, love your stuff but I have one tip for you. Put the wheel bolts in by hand because you can very easily strip a thread using impact wrench, that would give you huge problem and cost for this kind of car. Great job, keep it up!

[@LapekGarage]

It's nice to watch. The job was done professionally. Regards from the garage.

[@nickvanaerde5365]

After endless evenings of binge watching to the channel and driving wife and kid crazy; I have finally caught up with the latest VLOG. Still loving it!

[@wattsobx]

There is something about your shop and skill that just speaks to me. Great attention to detail love it. Great work from the ole USA.

[@Smirnoff44]

Work of art as always Jim, beautiful stuff 👍

[@DanielJames7.7.7]

You've got the best detailing vids I've seen around, thanks and keep it up!

[@Audittr2108]

I polished and detailed my car this week. Was a single stage enhancement and when I got tired which is when it’s easy to rush a section, I remembered Jim White and kept my arm speed nice and slow!

[@duncandorris884]

Impressive, Jim. It gives me great motivation to step up my game.

[@aarong8633]

Great job Jim, your editing/vlog skills are getting better with each one put out so keep it up mate.

[@darrengaskell1875]

Great vid again as always!!! Jim and Terry the dream team making dreams of good paint a reality....

[@johnobrien8398]

If only people were treated with such kindness and care the world might be a better place. I hope the inanimate object was happy with the result

[@rhodes7586]

I get more excited than I should for outdoor after shots! Great Work as usual.

[@94muddertrucker]

Beautiful job as usual. I am getting ready to do a black Ferrari California. It has definitely been hammered! Fun fun

[@akisbaklavas9328]

Bravo Jim.. very good job. I have in Munich this job and I think you are the best aufbereitet in the world... i'm from Greece and I am very Braut for you.

[@lewishudson2117]

Noticed your new Bowers and Wilkins headphones, beautiful things...🎧

[@BadTrainDriver1]

Toto's Africa FTW!!!

[@maxburg4817]

Some of the best work I’ve seen in the industry, given the issues with that paint - And I’m OCD... very good !!!👌🏼

[@DevonKocevski1]

MAN! At the end where you were using the light saber with lights out seriously looked like Project cars or Gran Turismo garage..like it was digitally created! Great job! I finished my 135i and I'd say I got about 75% to what you do and I'm SO HAPPY haha. Looks like a mirror.

[@rishivyas2577]

12.55 throwback to SO SOLID CREW! LOL Love it

[@gary3353]

New to the channel mate loving these kind of vlogs being a petrol head I couldn’t imagine before being introduced to your channel that old and mistreated paint could be manipulated in this way great work and informative content Jim 👍

[@liverpuul25]

simply amazing Terry

[@madisonmas4099]

Parabéns. Você é super profissional. Muito mais do que detalhista. Você é perfeccionista. Tudo nos mínimos detalhes perfeitos.

[@barryfox5454]

Yet another stunner jim. Excellent work 🖐️

[@downsouth4717]

Absolutely stunning bro! That's one sweet looking redhead!

[@akvaleting8477]

lovely work jim

[@norwegiandude6263]

Very relaxing to watch this channel 😀

[@nightmarecivic]

I just love your work, makes me want to go detail after every video.

[@rarejer]

Makes me want to buy a car!

[@tony.775]

Very nice work indeed Jim. Surprised you use the iBrid as much as you did because I love the tool, you can be so inovative. I don’t feel alone on that now. Sod that rushing, the iBrid gets it done in those difficult areas and more control, just takes patience. Be nice to know what MF pads you were using, just found some myself to try. I use the 3” foam on the PPF and feel comfortable. Again,patience. Excellent job.

[@BlkCal30t]

Just stunning, once again! Amazing work guys!

[@23hublock1]

Clean and Shiny in Aldershot, best place for everything!

[@jortvanbedaf1985]

The Ferrari looks awesome, Great work as always

[@3storiesUp]

I miss Terry .. I think Jim was a happier camper when he had company as well... all supposition though. Whatever Terry is doing I wish him well.

[@azizhachimi8744]

Jim, you are one of the best detailer in the world! You attention to detail is just out of this world! Can I ask where you located are?

[@SteveE293]

Have you ever considered getting an air purifier?. It should reduced amount of dust and debris floating around which has got to be better for the vehicle and your health

[@PhilArnold001]

Great job as always Jim! Just a minor point this is actually a California T not a California, as this is the facelift to the original that was 6 years older

[@Rickster80]

Always a pleasure to watch White Detailing videos and another top quality job! 👍🏽

[@chrishenderson2595]

A stunning car and as usual a stunning job

[@GregoryVeizades]

That's actually the Twist N Shout drying towel, not the Dry Me a River. 😁

[@virgiltracey9130]

3 years old, but only 91 miles ! Some people have more money than sense.

[@cicci0salsicci0]

Or maybe some people bring back the clock.

[@surajjohn29]

Right, and the money just grew on their money tree i suppose. Hate when people say u need to drive these cars. Of course they need to drive these cars but sometimes people who own these cars have multiple cars and its ok if u don't drive every single one of them.

[@virgiltracey9130]

Suraj John . 91 miles is barely delivery mileage. If I owned it, I’d rag the arse off it.

[@rainmaster2936]

virgil tracey well then make it happen. Instead of critizising the owners, Make ur financial situation stable enough to own couplw of these and not worry abt puttin miles on them. Do it ! start today and make it happen.

[@zubastik2992]

It was done in order to get LaFerrari did you even listen

[@stevelangsdorf7307]

Always Always the same, perfection, thank you.

[@billyfordyce7686]

Awesome job as usual Jim, 🆒

[@babis10]

Amazing Job and Car Jim,GREAT👍👍👍

[@stuartlloyd-jones9583]

Can understand how there appears to be so much damage, especially when looking at the wheel lugs you cleaned, cant believed they were ever used but look worn.. 90kms. Wow

[@WarrenF]

Might be a good idea to remove the bricks in between the 2 garage doors and have 1 door.

[@richardkkirk]

ya can see the damage on the front when ya went over with the light.....but we all know it won't be there for long.....lol...with the amount of problems on that i'd say some one at the fararri factory needs to be shown how to use the buffer...lol...oh and regarding air i'm playing with the idea of adapting a wagner sprayer compressor that sits alone so i make the feed pipe smaller hopefully it will increase the cfm to be able to do a half decent job.....cracking turn a round jim as normal, hope ya got time to enjoy ya fish and chips....

[@BatcatCA]

Great vlog Jim, tough to finish the car so quickly! One question - in terms of lacquer thickness, what's the thinnest you're prepared to go? Or does that change on a car by car basis?

[@shakeelahmed5822]

Wot happened to the auto finesse box opening Again thanks for the video

[@jonathanw4750]

"Drive me a river." LOL.

[@ABOoODALzhrani]

Just amazing

[@oliversinclaire2051]

Brilliant . ... but what happened to auto finesse delivery ..did I miss something haha gotta love AF!

[@AndyGarton]

"Rosso Red" means "Red Red". The paint is called Rosso Corsa, which translates best to "Racing Red".

[@bigjml]

Andy Garton I am sure the name "Rosso Red" has been used for other marques in years gone by. I can't remember which though, it mighe have been Ford. Or maybe we just used the name back in the 80's!!

[@col72]

Yes it was ford which used rosso red. The fiesta xr2i was rosso red back in the 90s

[@bigjml]

col 05 I thought it was. My XR3 was Red and I was sure it was Rosso Red.

[@col72]

random thoughts yeah I had my astra mk2 painted in rosso red a gte lookalike ,awesome colour and probably was the escort colour pal

[@thePorsche911Steve]

Another great blog! At the end, when you opened the bonnet and revealed the engine.... did you purposely time it with the saxophone? Nearly sexual in how beautiful that moment was!!!

[@jordanshoneify]

positect... drooling.

[@BoReinhardt]

Hi Jim I am enjoying your videos. Is it on purpose you keep the engine running while washing the engine bay? How do you keep water out of the electrical system?

[@rice-rocket]

Great video and work, Jim. What products do you use when detailing cars with carbon discs? What sort of products are not to be recommended when detailing cars with said discs? Thanks, John.

[@milaskilathelab]

In early to witness greatness. As usual!

[@nathanwarren2311]

Yes!!

[@rosscharlie5349]

Jim the wife called you and Terry beauticians. . Sorry I did try to explain to her. Going to divorce her soon as. There's only so much a man can take. Outstanding video as per the norm .Cant work out how it had so much damage tho Daz

[@Ssustar]

Hello Jim & Terry. Do you offer any type or schooling / shadowing or let propel come to your shop? I'll bring what ever you need from America!

[@MrBen1976]

Hello,I wondered if you could help.I have a faint scratch in the clear plastic interior dial cluster. Any idea what to use? Love the channel.

[@EG3HC]

Question: can you just wipe down wet paintwork ready for the next stage after claying or does the clay leave any kind of residue behind? Thanks in advance.

[@2of2DCH]

So many miss aligning wheel center caps. Especially tire shops, they always look at me funny when I try to explain why I want them left off so I can align them.

[@2of2DCH]

You missed the purpose of what he did then. Center caps, once popped in, don't normally move, which you can see in the vid as he had to pop them free from the backside. So by aligning the foot to the horse to the valve stem the center cap is aligned the same on every wheel. It's a minor thing, but makes for a cleaner look. For example on my VW every center cap is aligned with the notch in the W directly inline with the valve stem.

[@stanleycarling]

Did you not remove prancing horse from boot..? as see some defects on vid..

[@Doggepp]

Jim! Do you add Gyeon Leather Shield to the steering wheel as well, or do you just clean it? Im doing my car soon, and cant decide if I want to do the steering wheel or not, does it change the feel?

[@tony.775]

Jim, what modelDeFelso- PosiTector thickness gauge do you use? It appears to measure total paint not lacqcuer???

[@R2D2trashcan]

I always thought white and silver hid scratches the best but this red seems to completely consume them.

[@JstPressPlay]

Great video as always. I would like to know where he gets his music from

[@evanwheeler7687]

Love the videos! What was the last song used in this one?

[@PauloEspilotro]

Sensacional.......!

[@raul123nunez]

Love the video, How much do you charge for Detail a car ? I’m from the USA and I’m just trying to get the right price for my Detail (art work)

[@AndyGarton]

Yes, very difficult to work out where the damage was caused!

[@mickcoomer9714]

I think it’s been polished with wool. Wire wool.

[@GMDetails]

Hi Jim, what editing software do you use for your videos ?

[@whatismyname3775]

Jim, What are your thought on gyeon mohs vs kamikaze miyabi? I really want to hear your opinion!!

[@nstoffy]

Question: After washing the vehicle and moving to the drying stages using the blower, do you find debris disturbed by the blower from the crevices that have moved out in the open to the adjacent panel potentially scratching the panel on subsequent wipe down? If so, do you have a method to mitigate the possibility for those scratches? Thanks! And thanks for the videos, very informative.

[@someoneelse7724]

It's all been flushed out during the wash process by that point, personally I wouldn't overthink it.

[@jarredharris5862]

How many hours did this job take?

[@robertstolp7040]

Nextflix, Amazon... Nope, just give me some WhiteDetails videos and I’m good!

[@danyz4197]

Thank,s JIM for the Clasroom Detailing.

[@jct4111]

How much do you charge for this service? I am in the process of buying a 3/4 year old California t and would like to have this done. Please let me know. Thanks

[@WhiteDetails]

Hi, thanks for the message. If you are able to email me, I can send over a quotation - [e-mail]

[@nickwhitaker2854]

Thank goodness you guys aren't musicians... LOL

[@SunilK-cs1tp]

This guy use to do write ups on cleanmycar.co.uk nd he was awesome then. Very good at what he does been a fan before the KZbin videos keep up the good work buddy. You come along way. Thumbs up.

[@Neil2022]

Not sure i would go to Yiannimize first and then to Jim? Should be the other way round surely!

[@hirsty9159]

Why? Would you want people working on your car to wrap the roof after it has been perfected? Logical order if you ask me.

[@Neil2022]

hirsty9159 good point indeed. I wasn’t thinking straight as I was six Stella’s in.

[@wattsobx]

what color temperature are your shop lights?

[@mrheisenberg72]

Beautiful men doing beautiful jobs

[@eddedwards5496]

what was in the auto finesse box?👀

[@paulmcwhirter2466]

Jim I’m doing details in 2 days for people who think I’m ripping them off at £150 to £175 at the most and maybe shampooing seats and carpets and trying to remove scratches that someone previously have been at with t cut and once they used brasso on a £50 k merc . If I charge more they just don’t come back and dare I mention ceramic coat at an extra £50 , any ideas where I’m going wrong as I had to stop as it’s costing me money and I took COVID and lay in hospital for a month so customers are all gone probably so I’d like to return at a higher spec

[@anthonywhite721]

What was in the auto finesse box

[@MrZimmaframe]

I’m pretty sure the clay bar would of created micro scratches too

[@pjfan173]

Is it possible that it had more than 91 miles on it

[@ToxicZ0mbie]

Hey Jim what paint thickness gauge do you use? I've been needing one for a while and can't seem to find a good one

[@bradster1012]

Dw auto detailing also interested in this

[@simont4708]

nice work and headphones. I have some myself

[@normanmann7404]

Simon T @

[@paulmcwhirter2466]

Ps great job on the Ferrari wish I had 5 or 6 days to do a car 1 day and the phone nearly melts

[@iamyourfuture808]

Just wondering how you view your long term health in this game ? Good to see you have hearing protection of sorts but I don't see any means of ventilation/ dust extraction in the unit. There must be a shit load of dust created and without protection your lungs are taking plenty of that in. Also rsi and white finger should be considered with constant use of power tools. Lastly, the grey hair brought on by stress .. just for men has that covered.

[@RenoveAutoService]

Nutella POWER!!!

[@LadyJustice86]

5:14 - i can see it. only because i have experience paint correcting

[@hansjorgkarcher9504]

Perfect!! Absolut perfect!!

[@ZipperDetailing]

Can the ceramic coating also be applied to the exhaust tips?

[@Rogerkviteberg]

you usaly use Wheel coatings for the exhaust tips! :)

[@ZipperDetailing]

Jan-Roger Kviteberg OK thanks. But very often a normal paint coating is also used for the wheels. 😆

[@Rogerkviteberg]

i know, but the wheel coatings usaly can withstand more heat then normal coatings. thats typicly why there is a separate wheel/metal/exhaust coating :)

[@samgab]

I wanted to buy a Toyota Camry, but before they would let me buy one, I had to prove to them that I already own a Yaris, a Prius C, a Starlet, and a Corolla...

[@raycompton8748]

👍