YOFER Front lip install on my 11th Gen 2022 Honda Civic Sport!

[@jeffrozario4239]

Clean install and procedure!! Looking forward for the next videos! Non of the videos has ever disappointed 🙌

[@717PROJECT]

Appreciate that Jeff, thank you my friend 🙏

[@angelrico9469]

#1 source for 22 Civic bro 🤙🏽. Great video!

[@717PROJECT]

Thank you, Angel 🙏 greatly appreciate it my friend!

[@ircooking1677]

Nice install. However i personally prefer the other Lip. I just think it has that sort of look that adds more to the sporty look.

[@717PROJECT]

🙏Thank you, IR🙏

[@davidmartinez539]

I agree with this. Plus, if you ever decided to color match the side pieces, you can always do that with the eBay lip too.

[@717PROJECT]

@@davidmartinez539 I was actually going to do that before I got the yofer. Still might!

[@marcandrebenoit4883]

Im so impressed with the drive of the new honda civic

[@717PROJECT]

I am too. Half tempted to put some ZR rated tires on it and see what it can really do!

[@marcandrebenoit4883]

@@717PROJECT its crazy honestly i never tought it would be so different

[@jessicaleigh7205]

I have this same lip, just came in the other day and flew right to you for the quickest easiest install. Appreciate the video and the heads up on the possible pros and cons before I install mine!

[@717PROJECT]

Awesome! Let me know how you make out!

[@jessicaleigh7205]

@@717PROJECT definitely will do!

[@jessicaleigh7205]

Lip install came out BEAUTIFULLY!!! Thanks so much for your video, made the install a piece of cake and it completes my yofer rear spoiler set up! Going to install my gloss black door handle covers next!

[@717PROJECT]

@@jessicaleigh7205 You are most welcome! Glad it went smooth and easy!

[@charlessarin]

Nice upgrade. I prefer the body color. Looks more OEM. Also I would have sent the middle piece back. It's a manufacturing flaw- either not enough plastic got into the mold (injection pressure/temp problem) or didn't cure long enough. The part can't be trusted long term. The screws you reused looked pretty bad for only 2 months of on the road. A trip to the hardware store for some better coated or stainless would be recommended for anyone else adding this.

[@717PROJECT]

Appreciate the comment! I could have sent it back, but again I don't know if I did it myself. I'm more likely to send it back for the passenger side end not fitting properly. The reason those screw are already like that is from the salt on the roads. Might change them up from your recommendation. Thank you!

[@charlessarin]

@@717PROJECT Corners are always the weak point on an injection mold. FF to 19.30 on this video for more plastic knowledge: kzbin.info/www/bejne/pWWadWt9npuml7c.

[@Dan-p360]

Enjoyed the vid as usual. The Yofer definitely looks better IMHO. Always looking forward to another project video. Maybe one day you can auction off the project car and recoup your money to start the next project car as your channel explodes due to such good content. You the man bro.

[@717PROJECT]

I greatly appreciate the kind words, Dan! I think I'll keep it and just get another project car. Give it to my daughter. She drives it quite often now and she loves it. I've been looking for a car for her but the used car market is still ridiculous. So if I can't find one that's what I might do. 23 Civic in the near future possibly! I already have my name on the list for when the 23 R comes out!

[@jerrdanypa6924]

Clean! Great vid brother! Mine comes in tomorrow. Cant wait. Thanks to your video, i already have the idea on how to go about it. Thank you for your vids! Great work!

[@717PROJECT]

Appreciate the kind words, LJ! Thank you bro 🙏

[@Jakeborges1991]

I definitely prefer the one you just installed! Looks real clean. Bulks the front end up!

[@717PROJECT]

🙏Thank you, Jake🙏

[@SSGKeo]

The tape they provide is always a lightweight. I replace the tape from home depot or lowes with the 3m 30lbs tape.

[@717PROJECT]

That's exactly what I did! Appreciate the comment as always, my friend 🙏

[@SSGKeo]

@@717PROJECT yes sir ! Nice to see this build looking exceptional !

[@717PROJECT]

@@SSGKeo Thank you

[@na.custom2273]

My plan is to use ramps and have the car up when putting the lip on, thanks again for the content!

[@717PROJECT]

Ramps are a great idea brother!

[@hiteshverma4705]

I personally believe the other lip from ebay is give quite impressive look to the car.

[@717PROJECT]

I like them both. But with the whole aero kit, they yofer looks better.

[@miguelnegrete847]

Love how it looks man, it really gives it that sport look that it should have in the first places.🔥🔥

[@717PROJECT]

🙏Thank you, Miguel🙏

[@mikeh7220]

Nice car. I’m actually trying to decide between a sport and touring Civic. For Apple car play, do you have to use the USB cord every time to connect it? Also, how much do you think it would cost to get new speakers installed? I can do without most of the other touring upgrades.

[@sammy7033]

Yes, you need usb every time for apple car play.

[@donproduction6248]

The Yofer look so much better it feel like it came that way straight out of the manufacturer. I finally got my civic after 4 months and I wanted to order this lip but I can’t find the meteorite grey colour that match my car.

[@717PROJECT]

Don, I think they only come in red, blue, white and gloss black. Could always have it painted. I had to do that what you'll see in next week's video. Always appreciate the comments brother 🙏 Thank you!

[@azca.]

Yeah just paint it

[@olphmatachines]

Man that looks good!!! Looks very sporty!!!! I like both to be honest. I’ve missed the last videos… Time to catch up!!!!

[@717PROJECT]

Thank you, Chuey! Appreciate it my friend!

[@bencrabb1583]

Def the yofer lip, looks way better. I'll probably get this one for mine too.

[@717PROJECT]

🙏Thank you, ben🙏

[@mrpicpalac]

I like this one more Miller, but drawback is the plastic cracks easy, and hope that was the only and last drawback. Awesome video, as always!✌️

[@717PROJECT]

Me too my friend! Appreciate the comment, thank you 🙏

[@MrTLX]

The way you break down the install vids is fucking great I’m gonna wait for a better product tho

[@717PROJECT]

Appreciate the kind word my friend 🙏 Thank you

[@jeronescott4283]

Yofer lip more complete with the paint match. Definitely a different look. Have mines on order already also

[@717PROJECT]

🙏Thank you, Jerone🙏

[@slipperypicklexd6252]

Lip looks so clean! Curios as to where you ordered it from. I kinda want to get them for myself. Thank you for the video again! Can’t wait for the next one.

[@717PROJECT]

Here is a link if you want to check it out, www.ebay.com/itm/For-2022-2023-Honda-Civic-Yofer-Painted-Blue-Black-Front-Bumper-Lip-Splitter-Kit-/175161146595?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

[@717PROJECT]

Thank you as always for the comments my friend 🙏

[@blackhole7666]

Looks good I like the middle part you did with your socials on it. I’m with you the color didn’t match perfectly and that would bother me personally but it’s close enough if you don’t mind that. Personally preferred the other lip but both take the car to another level

[@717PROJECT]

Thank you 🙏 Appreciate the comment! I like them both in there own ways. Cool part is I can switch back whenever 😃

[@blackhole7666]

@@717PROJECT most definitely. Love your content and can’t wait to see what’s next.

[@StillTruee]

Damnit, another mod you’ve shown us that I want. 🤣 bummer about the passenger side, they should make it right and have another sent out.

[@FB8822]

Great job bro Miller ! Love your videos ... Civic 11 gen is finally launched in our part of world as well.. that is Pakistan 🇵🇰 Mine is coming soon ! And i intend to keep my 10th gen as well . . All the best, great content ..

[@717PROJECT]

🙏Thank you, Fahad🙏 Glad you're getting yours soon my man! Appreciate the kind words, means a lot!!!

[@johnkent6866]

I like both tbh but the Yofer has a more subtle natural look as if the car comes with it stock lol so I’m leaning towards this one, eBay looked good too though

[@717PROJECT]

I like them both too, John! I'm going to keep the ebay one. Change it up every once and awhile.

[@erizlovectchannel6058]

Absolutely awesome..hopefully next rear defuser yofer . It's look more bad ass with akrapovic muffler.

[@717PROJECT]

I haven't seen a Yofer rear diffuser yet! You have a link by chance?

[@erizlovectchannel6058]

@@717PROJECT fb.watch/bJR9pgy-td/ as you wish.

[@JC-hn5qx]

Looking good with these, a clean and simple set up.

[@717PROJECT]

🙏Thank you, J C🙏

[@themaineadventure4687]

I love how they come already painted for that price but predrilled would just be better. Thanks for the video. Yofer side skirt next??

[@717PROJECT]

Always appreciate the comments 🙏 You got it, skirts next!

[@themaineadventure4687]

Your sticker mod looks 🔥

[@717PROJECT]

@@themaineadventure4687 🙏Thank you🙏

[@marcandrebenoit4883]

Just got my new car buddy what a different drive

[@717PROJECT]

Awesome!!! Congratulations my friend!

[@GA08GT478]

Nice upgrade. I’m hoping to add a Yofer lip to my Accord.

[@717PROJECT]

🙏Thank you, GA08GT🙏 I'm sure the install will be exactly the same.

[@raynaldfernandez1436]

Love your videos man. Keep up the good work!

[@717PROJECT]

Thank you, Raynald! I greatly appreciate the kind words 🙏

[@aaronmorales9402]

Awesome installation

[@717PROJECT]

Thanks man!

[@reaf.x]

Nice install as usual I think I personally like the all black lip more but this still looks nice 👍

[@717PROJECT]

Thank you, Drew! I really like them both a lot. I do think the yofer with it matching the paint looks more factory but the other one looks a little more sporter!

[@reaf.x]

@@717PROJECT yeah you’re right definitely looks a bit more aggressive in all black

[@andrewramirez6903]

Definitely the yofer lip I got the same one on my red 2022 civic and I got the same problem with the right side on my lip with the double sided tape even tho it dosent look so bad

[@717PROJECT]

Appreciate the comment, Andrew! I redid the passenger side last night and is holding up much better. Used a different tape and added a bonding agent.

[@jeff-rey2534]

Great vid bro !!

[@717PROJECT]

Thank you, Jeff 🙏

[@mrshadow4854]

Nice video so when you buy the lip your have to drill the holes for the lip to screw back on your car

[@717PROJECT]

Unfortunately, yes you will have to drill holes. I mentioned inrhe video if Yofer watches they should pre drill. Would probably sell more.

[@ronz7562]

glad to know you don't have to remove the front bumper! do you have the link to where you get that at?

[@717PROJECT]

Appreciate the comment, Ron! Here you go www.ebay.com/itm/For-2022-2023-Honda-Civic-Yofer-Painted-Blue-Black-Front-Bumper-Lip-Splitter-Kit-/175161146595?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

[@nicolascars-vlogs]

This one look very very nice I really like it . Good work.

[@717PROJECT]

Thank you 🙏

[@jayarellano3652]

Great install video as always! Ever thought of painting the front grille and fog light covers gloss black?

[@717PROJECT]

I has crossed my mind!

[@-Tecky-]

Hell yeah another video!!!

[@717PROJECT]

🙏🙏🙏🙏

[@mikeyl114]

That my friend is why honda oem lips cost a lot and other reputable brands who make lips charge more. You are paying for better fitment and quality of materials

[@717PROJECT]

Agree 💯 Mikey!

[@vtecdpn100]

Was trying to look for this lip in sonic grey but only come in red blue and white… I have their trunk spoiler on order. Hope it fits the civics crazy lines

[@717PROJECT]

I believe they come in gloss black also, which would look good on the sonic grey I think! Or, you can always have it painted. Appreciate the comment 🙏 Thank you!

[@q50redsport47]

Ebay all day

[@717PROJECT]

Thank you 🙏

[@JR-dd7sl]

I like the subtle black lettering too. I’m wondering if you’re planning on lowering it? If so, you going coilovers or springs. I’m trying to decide myself.

[@717PROJECT]

Thank you, JR! I'll go with springs when I lower it. Don't want to go to low.

[@scottcampbell4585]

Like the new lip ..The color is awesome 👍

[@717PROJECT]

🙏🙏🙏

[@Sergeant_GiO]

That’s why I don’t buy Ali express stuff 😩. HPD for the win 🏆

[@717PROJECT]

I here ya! Oem always fits properly. Just wasn't paying $1400 for it. Appreciate the comment 🙏 Thank you!

[@Sergeant_GiO]

@@717PROJECT Keep up the excellent work. Love your videos 🙏🏽 I put HPD. Drill holes and stuff. That thing is super safe.

[@717PROJECT]

@@Sergeant_GiO The kind words mean a lot my man! Thank you!!!

[@hugodustov5377]

I have been thinking about getting this lip can you tell me what the ground clearance is from the road to the lip ? Great video, def will be using it if I pick up this lip.

[@nindorivera]

That one cover most of the side of the fog lights they look great and the custom you did to the cernter was a good idea, some day will do that to my daughter car. did you opened the menu in the radio for the audio check options?

[@717PROJECT]

Appreciate it, Ramon! And, yes I did! Thank you.

[@calista2006]

Do you have a link you can share for the lip?

[@717PROJECT]

www.swaautosports.com use code 717 at checkout for 10% off

[@3.0Suskiii]

Ayooo if you plan on getting getting sideskirts or a diffuser you should get from aeroflow they make pretty high quality stuff got myself a front lip and sideskirts and they are pretty worth

[@717PROJECT]

I already got the Yofer skirts. Picking them up at the body shop tomorrow. Will be next week's video. I'll look into the areoflow tho. Be cool to have 3 different Aero kits 😃

[@TheJaysonsunga]

Nice install. Did you have to drill holes to install the middle lip? I just got the same lip and quickly mocked it up and it looks like I have to drill…unless I positioned it incorrectly.

[@717PROJECT]

You can use a drill but you don't have too!! I just used a screw driver and some elbow grease!

[@bebelin5746]

I have the same issue (gap) on the right side of the bumper. Don’t know what to do

[@717PROJECT]

I put a screw in on both sides. I show you in this video here kzbin.info/www/bejne/sGWvhHWVedqjg9U

[@danielcastillo5237]

Another great video 👍 I might’ve missed it if you mentioned this already but where do you purchase your Yofer products, I know a couple of people on Instagram that sell them but also on eBay there’s a few I just wanted to know where the best place to purchase it would be.

[@717PROJECT]

I got mine off Ebay. I did see others on Instagram selling the same ones but more expensive. Appreciate the kind words Daniel!

[@aaronmorales9402]

Awesome insta7

[@IsaiahGuerreropeterparker]

Mine does the same thing on the passenger side

[@717PROJECT]

I'm going to pull it off and retape it with some heavier tape. I'll let you know if it's worth it or not!

[@diddyjoseph6767]

yofer of course!!

[@717PROJECT]

😃

[@somavillocillo1829]

damn that looks nicer man!! how long did it take til got delivered? is it worth it?

[@717PROJECT]

It took about 2 weeks to get delivered, Soma! Appreciate the comment my friend 🙏 Thank you!

[@buddahvega7113]

Power train 👀👀👀

[@ethanrodriguez7353]

was it hard to install your blue front honda emblem? it looks nice but im scared disassembling the front bumber will be too difficult myself

[@717PROJECT]

Nope, you don't need to remove the bumper to do it. Use some dental floss to get behind it and cut the 2 sided tape. Then pull it out gently. Has 2 tabs so be careful not to break them.

[@calista2006]

Does the sport and the touring come with different stock bumpers?

[@717PROJECT]

yes, there the same

[@linoemmanuels]

can you also do on how to diy change oil? thank you

[@717PROJECT]

Eman, I get my oil changes done for free at the dealer for 3yrs. After that, I sure will!

[@linoemmanuels]

@@717PROJECT awesome! thank you bro!

[@anthonyvelazquez1622]

I got the same car as you just different color and was wondering if there’s any other things you could do to it to make it have more hp

[@717PROJECT]

Anthony, I put a short ram intake on and an exhaust cut out. Not sure how much hp I gained but its a little bit quicker. Videos of both installs on the channel.

[@chrisdiaz6448]

Show your ride after finish

[@717PROJECT]

Check out this video, Chris kzbin.info/www/bejne/oaLXeaGAbNRnocU

[@xoMiu]

How does the tape hold up when washing the car? Specially auto car washes. Any issues?

[@717PROJECT]

I'll let you know. Haven't washed it since I installed it. Appreciate the comment, Miu! Thank you 🙏

[@aidenliam6541]

How many pre drill holes for the each sides? And how many screws you put? I’m trying to install mine. Thanks

[@717PROJECT]

Appreciate the comment 🙏 Only 1 on each side and 7 in the middle. Tape holds the sides on.

[@denniswirt175]

Wait a second did you just stick that to the drl that’s still broke and needs to come off again? 🤔

[@717PROJECT]

Haha, nope! It goes underneath. Good looking tho!

[@itsricksung]

Installing these lips does it ruin warranty for the car ? I'm still financing my car and I really wanna install a bumper lip to make my car stand out

[@717PROJECT]

Nope, your good! Just remove it before you turn it back in.

[@itsricksung]

@@717PROJECT so we have to keep taking it out ? I read that we mod cars as long as it doesn't affect how the car runs and it won't void our warranty

[@717PROJECT]

@@itsricksung You don't have too. You get $500 for exterior, interior and drivetrain each for damages when you turn it in. If you take it off, doubtful they'll know. Unless they get underneath and see the holes.

[@crazylunaticxx8416]

Is it still high enough to go over a speed bump? Legit question.

[@byronneredrodrigo2022]

Are the holes mandatory for the installation bc I really don’t trust myself

[@717PROJECT]

They are, Byronne! The double-sided tape isn't enough to hold it on there. Appreciate the comment, Thank you 🙏

[@EsauSol]

Like to do thE same to my to 2022 civic sport hatcHback

[@pd_dmn]

Where did you get the Yofer lip from? Looking everywhere for it

[@717PROJECT]

Here you go, Izaak! www.ebay.com/itm/For-2022-2023-Honda-Civic-Yofer-Painted-Blue-Black-Front-Bumper-Lip-Splitter-Kit-/175161146595?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

[@soullessrenegades1444]

Guy needs a heat gun. Will help mold the pieces to the shape

[@herbertlucena1951]

How do you like your 2022 civic i was thinking of getting one but still debating if i get the civic ex or sport

[@717PROJECT]

Appreciate the comment, Herbert! I love the car. Either the EX or the Sport would be a good choice. Thank you!

[@joanvargas8221]

Nice but when you going upgrade your wheels

[@717PROJECT]

When I can afford too! The wheels and tires I want will run me over $2k

[@davecook2790]

Seems like a manufacturer defect on the trim. I hope you reach out to them and get it corrected, unless it’s a defect on the Civic. Either way another successful project….as usual always appreciate what you do.

[@717PROJECT]

Thank you, Dave 🙏 I think its a small defect on the passenger side. Drivers side was all but perfect. That's the thing when dealing in aftermarket parts. Sometimes you have to make adjustments.

[@MrCHAZER31]

@@717PROJECT my passenger side is doing the same, I already took it off like 3 times and re applyo 30lb 3m tape. I just decided to not mess with it cause it’s not that noticeable but still bothers me it’s not perfect lol

[@717PROJECT]

@@MrCHAZER31 I even used bonding agent and right at the edge it's coming up again. Took a couple days! It bothers me too!

[@MrCHAZER31]

@@717PROJECTI’m thinking about getting a different lip tbh but idk well see

[@717PROJECT]

@@MrCHAZER31 check out tomorrow's video. It's not going anywhere now!

[@dade247]

Looking good!

[@717PROJECT]

🙏Thank you 305🙏

[@ak101farhan]

What about the yofer rear diffuser? I like it with the red led piece in the middle. Did you order from their website? How was that conversation like & getting the preferred color etc things you might want me to know before I order mine.

[@717PROJECT]

I ordered it off Ebay. It came painted blue. The piece in next week's video I had to have painted. I can't find there diffuser anywhere. Do you have a link by chance?

[@ak101farhan]

@@717PROJECT try contacting them from their website

[@717PROJECT]

@@ak101farhan I'll give it a shot! Thanks

[@Popparoks]

Do you ever have problem with scraping the middle part?

[@717PROJECT]

Every once and a while. Most of the time it's because I come into a dip or a speed bump to fast.

[@RyansReaper]

Would you know if this can be done on the hatchback?

[@717PROJECT]

I believe so! Just make sure to check the description of the part before you purchase. Appreciate the comment, Future! Thank you 🙏

[@vekarros841]

Do you happen to know if they make them in sonic grey?

[@717PROJECT]

I believe they only come in red, blue, white and gloss black Vekarros! Appreciate the comment my friend 🙏 Thank you!

[@raheelahmed85]

Looks great. I wanna get one but am confused if I should get the white or black since my car is white and read the colors don’t match exactly.

[@717PROJECT]

If it was me...I'd go black! I love the contrast between white and black on the Civics. Mines off a little bit. Appreciate the comment 🙏 Thank you!

[@Platanopower200]

@@717PROJECT do you have a link for the black one? I haven’t be able to find it on eBay.

[@717PROJECT]

@@Platanopower200 I just looked on Ebay and couldn't find one either. Check out turbo11thcivic on Instagram. I think that's where I saw it, not 💯tho!

[@raheelahmed85]

@@Platanopower200 its probably sold this seller only had 1 available. I'm sure more will be available soon

[@bluerayan1001]

Did you drilled holes yourself?

[@floridas_own]

That one looks better

[@717PROJECT]

🙏Thank you, Frankie🙏

[@lepoldbuttersstotch]

Looks good but the fitment is disappointing! Keep up the videos!

[@717PROJECT]

Agreed! I thought the fitment would have been much better. Always appreciate the comments my friend, thank you 🙏

[@kamikazenike1674]

Can the sedan lip fit on the hatchback I been wanting to get a lip but wasn’t sure if it’ll fit

[@717PROJECT]

I believe it does. Just make sure to check the description of the part before you purchase. Appreciate the comment 🙏 Thank you!

[@cybercalamity7907]

Does anyone what size screw it comes with?

[@717PROJECT]

I believe they were 1/4 inch screws but I'm not 💯

[@tspengel]

All I gathered from this was, stick with the other lip. To much scetchy stuff with this one.

[@717PROJECT]

I think the newer versions fit much better.

[@JasonPrice1]

The Yofer looks better but too bad about the fitment.

[@717PROJECT]

Appreciate the comment, Jason! I definitely wish the fitment was better.

[@rickyquinata7172]

I like this better... looks more defined...👍

[@717PROJECT]

Thank you, Ricky!

[@clintonlussier6070]

heat it up with a heat gun and bend it a little

[@717PROJECT]

I could try that. Seems to be holding still. I'm gonna pull it off again this week and redue that side and see how it comes out. Appreciate the recommendation 🙏 Thank you

[@atomicransom1193]

Are you going to get a rear diffuser ?

[@atomicransom1193]

Also what are you going to do with the other front lip

[@717PROJECT]

I haven't been able to find the diffuser. Have a link by chance? I'm gonna hold on to the other for the time being.

[@elephante_studio]

Kinda like the first one. It’s not a looks thing. It’s a quality thing. $170 pain in the a$s isn’t my thing. 👊

[@717PROJECT]

Very true my friend! The other one was only $10 more.

[@samirhamideh3379]

i’m sorry if this is a dumb question but are u drilling holes into the actual car?

[@717PROJECT]

The lower part of the bumper cover, yes. It's underneath, you'd never see them.

[@samirhamideh3379]

@@717PROJECT i’m trading the car in a couple years do u think i’ll have any issues?

[@717PROJECT]

@@samirhamideh3379 nah

[@jwalkerftw]

They don’t have one for my color of civic 🫤 Meteorite grey

[@717PROJECT]

Check www.swaautosports.com if they have one use my code 717 for 10%off.

[@jjacob25101]

That's nice, especially body color if not for the crack and such. I like that this cam pre painted, and does not protrude too far out and is low profile. It's nice to have those fancy ones, but I'd rather have the clearance to not scrape and hit stuff. Like miniature deer 🦌 😆🤣😂😹

[@717PROJECT]

I really liked the fact it came painted. My other part came painted just in a different color. Hoping to pick it up at the body shop today and get it installed for next week's video. This one sit's just a tad bit higher than the other one so there won't be as much scraping. Which I only scraped on the other one on certain speed bumps. DEER!!!!

[@jjacob25101]

@@717PROJECT The previous one looks pretty nice with the angular side extenstions, especially in body color. I saw a Sport Hatchback pic just recently like that in matching BBP. But sometimes you have stuff like those concrete or composite parking parking stall stop blocks or even curbs for stalls without them that can scrape there, especially if you have your car lowered. Stock height looks fine almost always for me in OEM Sport suspension trims. But I know some car applications to get stiffer lowered coil springs for improved handling Eibach has to stages. I would get the higher one, if I went that route. The only thing I would be looking at add for handling upgrades so far would be that 27Won front strut tower brace like Roymer Perez has on his Civic Sport Sedan. He also went with upgraded wider 19" wheels and tires. I prefer the stock OEM wheels. Tire brand and model can always change for longevity and performance handling preferences. When I needed new shocks I would go with KYB or Bilstein.

[@717PROJECT]

I want to get one by they are all on back order. I like 27Won but PRL is in my back yard, and I really like supporting local. There on back order too!

[@jjacob25101]

@@717PROJECT I guess either one is good, when you can get hold of one. The 27Won unit looks nice and simple to install, as ahould be the other one.

[@jjacob25101]

@@717PROJECT I just saw and reposted the YT Yofer Body Kit promotionsl video for the 2022 Honda Civics, and it looked pretty nice. Except for tinted windows, the license plate frames/covers, LED light bulbs and maybe foglights, and blacked out emblems, or these Blue JDM style emblems for the front/rear/steering wheel and delete the rear hatch Civic and Sport emblems, any body kit customized add ons will only cone after almost everything else I want to add on. If I got an Si, or a Sport Touring Smokey Mauve Pearl Hatchback, I would get those JDM style emblems with matching colors, and the body kit, with the rear wing spoiler. The Hatchbacks already have sideskirts and the Sport has a rear diffuser, so on the Sport, I probably would only get the front one since I wouldn't put the spoiler on the Sport Hatchback. After the initial stuff I would put on my car, the RF speakers would be a priority. I would probably have one of the top RF certified stereo shops install it, because I might get the component system, so let them install the remote tweeters, upgraded wires, and speaker noise reduction kits. When I get the amp/processor I will have them install the powered subwoofer hookup and remote bass boost switch, so when I an ready, they don't have to do all the work again, I can just pick up the powered subwoofer whenever I am ready, and plug it in. I think it even had long velcro strips so I can just anchor it to the side wheelwell or the right rear, where Bose mounts the subwoofer in the Sport Touring Hatchback. Either way, it will be easy to remove when I want to, and not be bolted down. Walmart even has those heavy duty velcro strip kits if I need more. Btw, for the ends of the front lip, did you try duct tape? 😆

[@MrCHAZER31]

That 3m tape they give you is horrible. I had to run to Walmart and get some heavy duty 3m tape

[@717PROJECT]

That's my plan for tomorrow. It's not holding up to bad but I want it better! Appreciate the comment 🙏

[@musamusa8063]

does it wash ok w the stickers being on it

[@717PROJECT]

I peeled the stickers off after I painted it. It's holding up nicely!

[@musamusa8063]

@@717PROJECT so it’s jus held up by bolts rn?

[@717PROJECT]

@@musamusa8063 I believe 9 screws and double sided tape for the middle piece. Sides are just double sided taped but I did add a screw to hold it on better.

[@musamusa8063]

@@717PROJECT i just finished putting mine on looks amazing my passanger side is weird jus like u what else besides heat gun did u do

[@717PROJECT]

@@musamusa8063 I put a screw in on the end. There's is just enough there to screw it in the bumper.

[@sprtsgui]

Yofer!!!

[@matta6298]

🔥🔥🔥

[@717PROJECT]

🙏🙏🙏🙏