Lego Gun, Pistol, Glock that shoots. INSTRUCTIONS

INSTRUCTIONS.

[@kieranmilner4208]

The best way to sneak Lego into a American high school

[@SpecialFragoutYT]

haha damn

[@thisisntsergio1352]

😭

[@paranoialshock2039]

Fuck you u made me laugh

[@paranoialshock2039]

@@Rootgm08 r/technicalythetruth

[@finleyfynn7665]

Hahahha

[@timmy21r]

Parts list: 22x 3M blue pins 1x 3M beige pin 10x 1.5M beige pin 2x 3M axle pin with 2M pin 16x 2M black pins 1x blue axle pin 2x beige axle pin 2x 1M axle with ball joint 3x 1M beam with pin (3:57) 1x 9M beam 3x 7M beam 4x 5M beam 5x 3M light grey pin with perpendicular hole (6:33 top) 3x 15M beam 6x 11M beam 5x 3M beam with cross axle 1x 2M beam with cross axle 2x 2M beam with axle hole 4x 2M axle 5x 3M axle 2x 4M axle with stop 2x 5M axle 4x 4x2 L beam 3x 3M pin with stop bush 3x 3M beam with axle hole on top (10:46) 1x 3M beam 4x 1M bushing 6x 0.5M bushing 2x 8 tooth gears 1x 4x6 angular beam (4:37) 2x axle joiner with perpendicular hole (6:48 bottom right) 2x pin joiner (7:26) 1x axle-pin T connector (7:02 top right) 4x 3x11 Technic plate (8:24) 4x 5M thin beam with axle holes at ends (8:55) 2x 7M thin beam Magazine: 3x 3M blue pins 1x 3M beige pin 4x 2M black pins 1x 3M axle pin with 2M pin (11:58) 8x 3M beam with cross axle (11:11) 3x 2M beam with cross axle (11:28) 3x 11M beam 1x 3M beam 1x 5M axle 1x 4M axle 1x 3M axle 1x 2M axle 1x 10M axle 2x 4M axle with stop 2x 2M beam with axle hole (11:28) 3x 1M bushing 1x 0.5M bushing 1x 2M cross block with axle hole (13:44) Setup: 3M beam 1M bushing 3M beams for ammo 4 large elastics 1 medium elastic 1 small elastic

[@janeklipka1429]

Thanks!!!!!!!!!!!

[@j04279]

Legend

[@jamesdiamond8789]

Amazing thank you

[@kasybasket5980]

I love people like you.

[@TheGamingDuck3]

My wallet is going in the drain after this

[@ThatFFan]

Bully: makes fun of kid for playing with Legos. Kid the next day:

[@umut_af5806]

Lol I love it!!

[@jonkersjcomers]

Surrender like the French did

[@blackblade6540]

knew there would be at least ONE comment like this

[@ThatFFan]

@@blackblade6540 Hahahahaha

[@mikeuk666]

It is Lego there is no S

[@docsein1]

You're a genius! Making something like this compact enough too look like a pistol, while simultaneously giving it full functionality is what makes this build so difficult. You just got a new sub.

[@prettyepiccat]

You can tell that he used a lot from Still thinking's lego pistol but i must say he did make it look way better

[@ariyehmoskovits3309]

same

[@aname9384]

But Idk which to get the pieces for. Which one you think?

[@brandonhicks5904]

same

[@ithejew4022]

it's easier to make than u think, i've made this 1 alot but i could never figure out how to add a mag and that was like 2 3 years ago when i was 12

[@Georikou]

When you don't have enough pieces ;-;

[@nogozoo2582]

When you don’t have the right pieces ;-;

[@suspatukka5447]

@@nogozoo2582 so u dont have enough pieces

[@nogozoo2582]

@@suspatukka5447 I don't have enough of the RIGHT peices

[@suspatukka5447]

@@nogozoo2582 so u dont have enough pieces

[@nogozoo2582]

@@suspatukka5447 yeh sure

[@s-n-g-b1457]

For personal reasons, I will be saving this on one of my playlists

[@The-anti-furry-marines]

The moment you realize you don’t have enough prices :(

[@toolthemaker4208]

22:37 imagine hearing that sound out a Lego building competition (that would be terrifying)

[@marcosbasbus7031]

*_satisfying_*

[@UnknownZYX_4085]

AND WHEN YOU SEE IT IT’S A .50 CAL LEGO BUILD THAT PENETRATES 100MM STEEL PLAE

[@hunterofdarkness8329]

Sounds badass

[@randsplayz112]

imagine hearing 00:13

[@tudormoise2164]

"I've had enough" *pulls lego glock out of bag*

[@GABAGOO82311]

Wonderful and yeah I don't have enough pieces but worth a sub!

[@sipsipsippy3340]

init

[@unlimitedgamez7698]

What?

[@leoperez3370]

Same

[@eskendyrackbar1710]

Juice Wrld Is an awesome artist, one of my favorite!

[@sipsipsippy3340]

@@eskendyrackbar1710 100%!

[@MrFanBoyDee]

this is easily the most complex yet most compact mechanism i've ever seen made out of legos. the mechanism and design behind that mag alone earned u my sub

[@Indie1293]

tbh the mag release is probably the most easy part on this build.

[@stranger986]

that edit with the pieces falling apart was so perfect

[@MarkThArc]

not your pfp

[@shiningpecan6978]

@@MarkThArc not you're either

[@Ben-si2zd]

Now I wish I hadn’t gotten rid of all my LEGO’s when I was younger

[@sovietjams4647]

I love how smart this is, uses a relatively low amount of pieces, looks nice, is relatively simple. I also love how unique it is, especially how you made the center rail for the slide.

[@ferrari4life597]

I robbed McDonalds with this...

[@GameKnight404]

How much did ya get?

[@alexSus-mk7dg]

Like 90%of those pieces are in my robotics class... Guess what I'm going to do

[@mepipe7705]

maybe: buy the missing 10%?

[@GameKnight404]

And finish what that teacher started?

[@alexSus-mk7dg]

Ha, like I have the bajillion dollars that would cost. thanks for the reply tho.

[@alexSus-mk7dg]

@@GameKnight404 ?

[@elmemincontreras9149]

💀💀💀💀💀💀💀💀my robotics teacher dosent let me

[@OnimoIndustries]

when you're on a field trip to Denmark but the quiet kid asks to go to the washroom

[@ritawoolstencroft698]

It looks like you can even do a tactical reload with this. Nice job!

[@laszayar]

Can you please do an inventory of the pieces that you need for this. It would be really appreciated.

[@chrisvking1973]

@Jack Wood i definitely agree, a lego list would be great

[@Airbus_aviation.]

I agree

[@mastermayhem6579]

Please do this.

[@AdrianBeats07]

yes please that would be very helpful

[@raiden_nlarts1934]

Yeah do that please

[@______xxfunky_space_panda4183]

This is what the quiet kid has in his back pack in preschool

[@crysteriagd2645]

lol

[@gfd_the_fallen_demon]

bro fr the quiet kid has a AK47 or Glock19 no but 🍑 quiet kid not big brain🧠 like the grade 5 or the lego class kids or scholar that R bored and k Lego

[@slode1693]

By far the coolest thing I've seen made from Lego!

[@bigbricks1003]

Been doing LEGO for years, and I still can learn a thing or two, thanks man

[@JayRev_Music]

the brains in some peoples heads……amazing.

[@putin8909]

Not me

[@GameKnight404]

@@putin8909cheers mate I’ll drink to that 🍻 I ain’t got a brain worth nothing in this empty head lol

[@m1tty247]

The first time anyone has made instructions that are actually easy to follow and have a great mech

[@cserosbence9475]

Very great design! But the part that the shell slides on is a little bendie, if you use a little bit stiffer rubbers itt might jump out of place. If you reinforce it 1 piece instead of 2 it becomes much stronger and it solves the porblem.

[@christopherraymer122]

I actually managed to build this! thx

[@bfsproductionsytp]

Where’d you get the rubber bands?

[@hadifziqri3869]

@@bfsproductionsytp buy one

[@jackfrost3121]

@@MXSVIC Jack frost has come to lend a hand! Hee-Ho! But the way to get these is most likely the official Lego website, they sell just about any kinda of lego piece.

[@CerealAmoeba800]

o shit sans has a gun!!!

[@Benjbroo]

What type of Lego is it

[@paracode7068]

Funny thing is that the cocking of the gun is basically a perfect replica of the actual gun, minus the shell ejection hole, its very clever!

[@BruceWayne-ke8nm]

Finally, an instructions video where it isn't reversed

[@C0S1R]

Ideal build speed + nicely selected background music. You don't often see this :)

[@lopex396]

This is so cool, the second I have the materials for this I’m instantly building this

[@kaanmutluerkaya8905]

Now this is real firearms.

[@Patichu]

Lego ideas is going to have a field day with this submission

[@Calthecool]

Shoots harder than I thought.

[@The_Original_Rtxyz]

Works very flawlessly i didnt have some pieces and since i have 3 years of playing with legos i was able to make my own mods to it so i could have it work for my size, note if you dont have the top piece the small thing just use the bigger version of that because thats what i did. it is a little big then but still better than nothing. Very good tho.

[@TheOneToKeepYouWaiting]

Thank you so much, you’re the only person to show instructions!

[@GeoWalker13]

Very nice work👍 Thank you for this build!

[@fallenbounds]

LEGO: "We feed creativity!" This guy: *Makes a functioning gun* LEGO: "Did I stutter?"

[@rndmpinkiepie64]

Parents: "how are you ever going to make money playing with Lego?" Person with this build: *"GIMME YOUR MONEY!"*

[@ARTala88]

Funny

[@113subswithoutvideos]

3 stands wide! Good job ....SUBSCRIBE

[@minhflikweert5618]

It’s studs by the way

[@Sheepdog9856]

Amazing design, easy to build and troubleshoot. I love the mag release switch!

[@OneOverPi]

This should be turned into an actual lego book.

[@drduck_2726]

i like how your names agent 7 and you watch this vid

[@emmadavies8117]

me: eat my studs bang bang mom: put your lego pistol away at the table

[@inv_vision]

This Is so insane, i did Build it and yeah the shooting mechanism can still be improved but designing this Kind of mechanism must have been very difficult already. So thanks a lot for sharing

[@j04279]

Can u help me with the pices i dont really know where to buy them

[@GameKnight404]

I saw this and immediately broke down laughing just repeating the phrase “of course this exists” for like 1 minute straight. Now I’m just watching this and enjoying the construction process.

[@spiderham6353]

Thank you ☺️ it’s always nice when I get help for school projects.

[@jamesl9447]

This glock works but the build structure is fragile & also requires specific tension of the rubber bands to make it work. Thanks Alexander P for the parts list

[@raiden_nlarts1934]

What r the parts can you list um please

[@jamesl9447]

@@raiden_nlarts1934the quoted google link was provided by a good person who gave comments here ealier.

[@animekid6025]

I like this gun. Not only it is a famous handgun, it is reliable and the mobility reloading plus the small weight just makes it awesome. I built this and at first it is trash but then I improved it and it works perfectly fine! Thanks man for the tutorial. I don't have enough pieces but I use other similar ones to make it cool. I also added some attachments too. Thanks for your tutorial once again.

[@whuknows]

I love the reload and pull back mechanism

[@redlabs1392]

The best pistol that I ever seen out of lego !

[@ab9bninja275]

Hi, really like the design of your gun, the trigger mechanism is very good. Unfortunately I had some trouble with making the gun shoot. I did everything the instruction said and the gun jammed. Turned out that I had put the firing bands in the wrong position. I really like the mag release though sometimes the mag just pops out when loaded. Speaking of the magazine, I like the way that you load the it because you don’t have to push Down the bullets, you can just drop them in. I also had to replace the shooter piece with a 1x1 technic beam because the 1x1 axel piece got stuck on the bullet. I love the way the tutorial is set out, it seems really clear on where to put the pieces. I found it slightly harder to fit the rubber bands as is do not have a small stick.

[@NathanEditz0]

same dude i really cant follow all of it but its really fun to figure it out how a gun works , anyways thanks to the creater

[@fernandoaxl949]

Give this man a medal

[@umut_af5806]

A NOBEL MEDAL

[@cubofthebear3868]

Amazing desinne functions well but I did have to extend the mag but over all well done been tryna make something like this for a while thanks a bunch

[@PUNCHEDPUNCHEDPUNCHED]

I like how the usual overlap with these Legos are people who like making cars and then there's the Lego and gun overlap demographic

[@jestiction]

I love the design! I would really like to see a video on how to make the AAC honey badger (if possible)

[@gjsfgjsdfrgjr]

That’s prob 1k usd worth of legos lol

[@hallwaerd]

This is absolutely incredible. Could you update the description with a list of all the parts needed? Thanks!

[@mahaylasturgeon1748]

yes i would like if you could add the peaces needed shown pls it is a great gun but it would be better if you could add them pls thanks

[@quelldieu7263]

Parts list: 22x 3M blue pins 1x 3M beige pin 10x 1.5M beige pin 2x 3M axle pin with 2M pin 16x 2M black pins 1x blue axle pin 2x beige axle pin 2x 1M axle with ball joint 3x 1M beam with pin (3:57) 1x 9M beam 3x 7M beam 4x 5M beam 5x 3M light grey pin with perpendicular hole (6:33 top) 3x 15M beam 4x 11M beam 5x 3M beam with cross axle 1x 2M beam with cross axle 1x 2M beam with axle hole 4x 2M axle 4x 3M axle 2x 4M axle with stop 2x 5M axle 4x 4x2 L beam 3x 3M pin with stop bush 3x 3M beam with axle hole on top (10:46) 1x 3M beam 4x 1M bushing 6x 0.5M bushing 2x 8 tooth gears 1x 4x6 angular beam (4:37) 2x axle joiner with perpendicular hole (6:48 bottom right) 2x pin joiner (7:26) 1x axle-pin T connector (7:02 top right) 4x 3x11 Technic plate (8:24) 4x 5M thin beam with axle holes at ends (8:55) 2x 7M thin beam Magazine: 3x 3M blue pins 1x 3M beige pin 4x 2M black pins 1x 3M axle pin with 2M pin (11:58) 8x 3M beam with cross axle (11:11) 3x 2M beam with cross axle (11:28) 3x 11M beam 1x 3M beam 1x 5M axle 1x 4M axle 1x 3M axle 1x 2M axle 1x 10M axle 2x 4M axle with stop 2x 2M beam with axle hole (11:28) 3x 1M bushing 1x 0.5M bushing 1x 2M cross block with axle hole (13:44)

[@hallwaerd]

@@quelldieu7263 you're incredible

[@KingtheNickname]

Nice gun had some trouble setting the rubber bands up but it now works

[@spirit.canada]

Amazing, always wanted to build a Lego Thecnic that can shoot!

[@Th_Uslss_Indvdl]

Imagine going to rob a guy and he whips this out

[@Wolfrich666]

i would probably be scared i dont want a Lego piece stuck in my nose or hitting me in the eye ;A;

[@justanormalbaconyt5093]

No just imagine the bullets are modified to be spiky but also not shoot very far so they just drop to the ground, then the robber thinks it’s not a big deal, but then he *steps on the legos*

[@LMAgri]

Let's go ! I'll try to build, even if I'm not sure if I have enough pieces 😆

[@mrwyyeet]

Lego should really make gun sets that are just like this

[@Squishmallows24]

So glad I found this. Now I know what I need to protect myself at home

[@rileythesword]

Just a helpful reminder: 1. When the rubber bands are added knowing their size is very confusing and can lead to problems. 2. I noticed the slide seemed to curve up when rubber bands are added, to fix i just used a 4L Axel with stopper at end and put the through the center of the modified 1x3 beam then added a 2L bean with one hole being an axel and other being a circle for pin. Then that put a restraint on the slide to keep it from bulging. 3. I would keep in mind that it seemed very fast paced in the video when showing the parts needed for a step, I get the video shouldn’t be long but at least give us time to pause the video and find the pieces that we need. On a good note this video uses fairly common pieces except for maybe the panels. P.s. Most pieces and sub assemvelies can be made using other pieces with the same amount or better strength. Just remember this is your gun use your imagination with what parts you have! 👋👋😊

[@Ello69420]

could you make a more in depth video of the slide mod thing? if you haven’t scrapped the gun yet, or you could just rebuild that mod and i’ll try to figure it out myself.

[@rileythesword]

@@Ello69420 sure I’ll put a video on my channel

[@Ello69420]

oh ye also, do you have a slide lock too?

[@Ello69420]

one of the problems i have is that the rubberband which shoots the bullet keeps falling off from the yellow little thing

[@rileythesword]

@@Ello69420 no slide lock but I’ve been tinkering with that system so maybe i might make on

[@josefadam7578]

Nice gun! Very cool! Great work.

[@kylewhelehon4469]

when he pulled out that tooth pick, you already know things just got real

[@BurgerSoda]

Lego: “lets build children’s creativity!” Yoshiny: GLOCK 19

[@klaxified1008]

when your halfway into it then you realize you dont have enough pieces and you wasted soo much time of your life to make a lego pistol

[@nintendope8837]

This was in my recommended.. that sums u what kind of person I am

[@Ditto-bz1li]

Amazing creation! How you made it compact and functional was just genius. However I think that pin spacers could be used a little XD

[@simpleanimations2726]

Had a crap ton of technic pieces lying around waiting to be used, ty!

[@KumaPawha]

"Lego Gun, Pistol, Glock that shoots. " Oh this is quite intreres- *"INSTRUCTIONS"* Ferb, i know what I'M doing today.

[@jacobrentz6409]

yeah now all i need is a list of parts

[@JoshuaBurton110213]

Still more reliable than a High Point.

[@Sawer]

You can say a lot about Hi-Point, but for the price they are reliable. But imagine carrying something that heavy, bulky and ugly xD.

[@whodis5444]

22:21 when billy the first grader has had enough bullying about his lego obsession

[@LodedDiper-tz6zm]

works so smoothly

[@genelomas332]

Very cool.. I will advise that rubber band selection is vital to the accurate function of this item.. My bands were a bit too big, so I had to get creative in how I attached them.. I replaced the front ball-pins with standard grey pins, routed the bands around these and hooked them over a single ball-pin on the underside just forward of the trigger guard (in the grey T-shaped piece to the right-hand side). I also found that by twisting the bands a few times they stay together, and this reduces the chance of them flexing into the barrel and obstructing the projectile.. I moved the hook point for the slide return rubber (first band installed in the video), to the outside of the slide, I put a tan 3/4 pin in the hole in the slide plate directly above the forward trigger cog, this gets the band out of the way (off the yellow half bush) of the action of the firing pin. I also (after breaking the double looped bands of the firing pin) reduced the firing pin to one band, looping it around a single stud tube piece - replaced from the grey bush in the video.. The single band gives better barrel exit speed, and it actually hurts to shoot one's hand in front of the barrel.. it also travels a good 30 feet! This thing could take out an eye now..!

[@prettyepiccat]

hey ive also been having these issues, do you think you could post a short video showing what youve done to it?

[@mohamedageed4376]

Bro wrote the terms and conditions lol

[@chrisvking1973]

how do you come up with these working designs? do you do it on a computer and it lets you know what lego pieces you need, or is it just trial and error? either way it is so awesome. great job and i hope u keep up the great work

[@hampt3r]

It's so easy, even a child could use it! And they do!

[@rumpelstiltskin2602]

that is a video i was looking for for a long long time, thank you

[@superiorquad3758]

This is amazing

[@lukaekar2289]

I would apriciate a list of parts that you need but otherwise a great chalenge to try out and great video

[@Himinoimnoi3298]

We gettin past airport security with this one.

[@jtg55]

I would actually buy a LEGO Technic Glock. Good for understanding the basic principles of operating a firearm.

[@okboing]

Woulda been nice to get an idea of what pieces and how many I would need, cause I don't have four of those panels used about 9-10 mins in, i only have two besides the ones that are already in a build

[@NormansCyclingLifeChannel]

Although I don't like gun, I found it very interesting to build it following your video. As such, I spent the whole afternoon and built this gun using Bricklink Studio 2.0 so that I can share the build instruction and parts list with friends.

[@noechaillet382]

Can u share it with me?

[@tew3]

share?

[@ryanking1923]

So where’s it at

[@tew3]

@@ryanking1923 someone posted a google sheets links to the list its somewhere in the comments

[@sulaymantothepowerx6572]

the mechanism is great

[@thedragonofcanada6659]

It may not shoot bullets, but this is a quick reminder to keep your grimey little booger finger off the trigger until you are ready to fire!

[@cheesesauceofdoom4333]

I made the predecessor to this, it functions the exact same, I've modded it myself (longer barrel for accuracy, extended mag, etc) it's just not as visbly appealing

[@longlong10203]

It works!!! Thank you so much!!!

[@Gaming_Badger]

This man will make a AA gun in his backyard using legos

[@JackJack-wg1hz]

Just awesome, you should work with Lego on their projects 😁👍

[@Zuhaitz912]

Hello, what tipes of rubber bands did you use??

[@adamv242]

Very nice! A parts list would be awesome.

[@alexanderpoirier8442]

I can help with that :)

[@alexanderpoirier8442]

docs.google.com/spreadsheets/d/1LPiKgHkIdtIbm9lnXtxqUuVJQjRjJGXuJhr8T5CAmGE/edit?usp=sharing

[@mohamedageed4376]

@@alexanderpoirier8442 so u got the list?

[@celtrik]

@@mohamedageed4376 Did u get the list?

[@mohamedageed4376]

@@celtrik nope

[@envixity37]

i dont have half of the pieces here but im still watching

[@henrylow641]

Thank you for sharing this instruction, slow and clear..

[@SwallowAerospace]

i tried doing this tutorial before but i messed it up and i destroyed it but i still had the handle and magazine for it so i made my own version of that lego gun.

[@BabyLandCrochet]

i had almost every singe piece but i did think that this was cool i subscribed

[@hadimeinui8484]

nice ! ! Great work here, reproducing a repeating crossbow on a lego gun, I like it

[@kunicrack7563]

this explains why quite kids like legos, so they can collect lego pieces to build this

[@fish8415]

This is what my kindergarten teacher thought i was making when i made that l shape

[@42ontues]

someone should make a parts list for this and similar videos

[@graysonthompson4206]

There is just look up lego guns some work and some is decor

[@legodudelol9a]

This is awesome, now to figure out a way to make it semi-auto.

[@saidtarabain7391]

Thank you for this video I’ve been trying to build a gun for 4 months (failed) then I found this and built it