1990 supra 3uzfe vvti swap

The swap is almost finished. Figured out why it would not rev past 2k. The afm and O2 sensors were not getting 12volt power. Found the power lead for the sensors on the big white body plug. Wired it up and it runs perfect.

[@ctraltdel3558]

When you don't rev, it's so quiet. You don't expect the sound.

[@SupramanTRD]

That engine fits absolutely perfect in that car. No need to worry about clutch fan setups of the jz, no worrying about intercooler pipes, or battery relocation. Everything just works as it should.

[@hectortrejo1198]

the legends were true

[@Supranforever]

sounds super beastly. i had a 1uzfe ae86, it was stout, i have a 1jz vvti cressida now! sweet swap bro!

[@yotarip]

Thanks man. Looks like we think alike. I have been test fitting a 1uz vvti in my 81 corrolla wagon. I also have a 1990 cressida but with a first gen 1uz. Gonna drop in a 3uz with 5 speed auto and e-shift after I button up the supra. My garage is full of 1uz's and 3uz's waiting for a chassis.

[@jacupsladder]

yotarip, I'm another toyota-head. 2 things: first, the 5spd auto won't work well in the X8 cuz of unfavorable final drive ratio. the 5spd auto gets a 3.2 kinda like a jza80 6spd. second, could this 1uz vvti ecu/harness/throttle body trick work on a 2uzfe? I know the intakes are a straight swap. I think the heads are essentially the same. maybe cams are different. please do reply.

[@jaynotsure670]

I have an MX-83 and an 87' mk3 supra waiting for a heart transplant in both of them, I'll take them!!!!

[@rustedratchetgarage6788]

yotarip can i have one i gota 79 pickup that would suit a 1uz nicely

[@ghostofsparta6579]

We are in the same page.. cressida + 1jz = LUV😍✌

[@rodionlitvinoff]

this is beautiful. i'd like to know every single detail about this swap. have you made some journal or smth?

[@tjillest5227]

Come to this video almost every morning looking at my swap cant f*king wait lol

[@PistonAvatarGuy]

I keep throwing my money at the screen.... .... but all I have is quarters because I'm broke!

[@ForeignAuthority]

Apparently we share taste in wheels and engines lol I'm pretty sure I've come across this before ... Sounds sick bro !

[@yotarip]

Foreign Authority Yeah. Maybe We’ve talked on club Lexus ?

[@ForeignAuthority]

yotarip I don't talk there only view threads ..

[@yotarip]

OK. Wrong guy. The guy on Clublexus doing the same swap is running a nissan 6 speed. Anyway, I know I'm late with this advice but you could have used the is300 trans by simply swapping the bellhousing, input shaft and the torque converter from the 1uz trans to the 2jz/is300 trans. Much less work and the trans can handle the power. I'm doing the same thing in my cressida 3uz/ is300 trans swap.

[@ForeignAuthority]

yotarip I didn't wanna do all that work and still be automatic ... I considered that for a minute ...

[@lordclay2533]

Belive in the POWER!!!

[@Joshua_N-A]

Is it me or the UZ engine is more fitting for the Supra if sold in the West?

[@Cristian13x]

The car is stunning mann and then that engine makes it so unique. My god 👌🔥

[@peterrobinson6099]

Details.... Headers? Cats? H pipe? X pipe? Muffler? Anything? That exhaust note is freaking sick!

[@yotarip]

Peter Robinson 1992 sc400 oem exhaust manifolds. No cats. 2.5” exhuast tubing to an X pipe just after the transmission. Transition into a y pipe just before the differential and the 2.5” pipe to a free flowing magnaflow muffler. I always get compliments on the sound.

[@peterrobinson6099]

@@yotarip that should would be awesome coming out of my S Runner

[@theredbeardedfox3110]

Goddamn, I fucking love this. Cheers comrade.

[@brostugen]

Love the sound man

[@bladoxtroon700xd3]

Sound Like Corvette ZR1 with Straight Piped + Mustang GT350R + Dodge Challenger Drag

[@DanielRodriguez-kl1ls]

Damn that sounds good.

[@stevensayalath2774]

im planning to do this swap hopefully! so did you end up using the 1uzfe vvti throttle body for this swap?

[@gRosh08]

Sweet.

[@mossy240z]

Awesome swap mate!! I wonder what sort of power this would make with the new kelford vvti camshafts?

[@PolonezV8]

I love my 1UZ-FE :D Nice Supra... :D

[@CoffeeMadeMeSay]

What’s the difference between the two ?

[@PolonezV8]

@@CoffeeMadeMeSay I don't understand a bit of the question. Could you clarify? 1UZ-FE is the engine that I have in my drift car and it's the same engine as in the Supra on the video;) Greetings from Poland;)

[@MrNoob-gv6xm]

@@PolonezV8 Mate, it is confusing for most people so dont worry. The thing is, the 1uz vvti, 2uz and the 3uz all look the same at first glance, coz they share the same, or at the very least, similar looking intake manifold. But on close inspection, they are different. Put aside the 2uz, as it is a less common swap considering that it is an iron block. Let's discuss the the aluminum blocks 1uz vvti and 3uz, the easiest way to tell at first glance is to look at the engine oil feed. On the 1uz vvti, it sits right on the valve cover, while on the 3uz, it is raised by a few inches, as in u can see a few inches long pipe proturding right where the engine oil cap is. That's the easiest way to tell. Then there few more differences. If u wanna just know bout their differences, read up on the uz engine on Wikipedia, all the uz engines, and there's a video on @CartuneNZ channel that explains the differences, u could either watch the whole vid for detailed differences, or maybe the first few minutes would be enough IMO. Good luck :)

[@avalero13]

That sounds siiiick!

[@Yisraelhendryx.]

I want to do this swap for my sc400 but I don't know what motor mounts to buy do I just buy 1uz mounts or custom. Also how did you connect the throttle cable? I herd that that the throttle body was all sensors?? Please get back with me ASAP!!!

[@yotarip]

Yisrael hendryx you will just swap the mounts from the original 1uz to the vvti motor. The engine blocks are identical. The exhaust manifolds will bolt up too. You will have to swap the oil pan form your original engine to the new motor if it isn't a rear sump. The 1uzvvti has a cable driven e-throttle so you will still use a throttle cable. You will need the long throttle cable from any 1uzvvti powered Lexus. They will bolt right into you car. The 3uz is has a completely electric throttle body and doesnt use a cable. I'm running 1uzvvti throttle body and computer/ harness on this 3uz motor. Works fine.

[@steventaylor9016]

Hey man does the mk3 turbo radiator work for the 3uz swap or do you recommend bigger?i got a 3uz mk2, Love the videos!

[@yotarip]

I’m using the mk3 radiator with sc400 upper and lower radiator hoses. Works fine. I was running the factory radiator for a couple years and just upgraded to the three row aluminum eBay special radiator. The oem worked fine, I just like not having to worry about the plastic tanks on the oem radiator leaking. You will need a pair of radiator hose bushings to fit the 1.5” hose on the 1.25” radiator nipples. Search radiator bushings on Summit Racing.

[@steventaylor9016]

@@yotarip thank you! I'm gonna do that this week and then put on my old xat w58 conversion kit, I just need the old land cruiser 3/8 inch master cylinder to push the t56 throwout bearing, I don't think the stock mk2 5/8 inch master cylinder will be enough, but well get there when we get there!

[@96st206]

I see your video has no dislikes...........be a shame if something happened to it...........

[@Z_LTries]

Dick.....................................................................

[@Twobarpsi]

So strange to hear a V8 sound coming from a mk3 Supra!

[@bloodOntheStep]

Pretty sick

[@joeleonardo5119]

sooooo gooooodddd love it

[@tigergray1100]

I'm so jealous

[@ghostofsparta6579]

Holly molly😍😍😍😍 bad ass V8 sound!! Heeeeehaaaa

[@bigafhat]

Thinking about swapping to replace my NA 7M in my 87 supra. This sounds fucking sick and would definitely be something a bit different than the regular 1J swap. In terms of difficulty, how would you rate this swap? Does the W58 mount right up to the 3UZ? Thanks for any help!

[@astonmarjo]

Damn bruh Very nice 💪💪💪🏁🏁

[@r84u94]

🔥

[@javontaadams2986]

Clean as a whistle! I got a 87 supra waiting for an LS swap

[@goku781]

Sound good!!!

[@nitronixus9402]

How did u achieve this type of sound???? I want to achieve it as well!

[@tigergray1100]

I have 98 ls400 and I have two back engine with computers and wiring harness I also have the parts for the ignition.... I need help on swap I might buy a supra and copy you if you don't mind?

[@tjillest5227]

Manual? If so what trans would bolt up to the 3uz ? Without adapters and stuff like that ? Any info would be awesome looking at same swap just cheap and reliable and to smack down stock 4.6s in town lol 😂

[@tjillest5227]

BTW jw the other video u have the same car 1uz is it a 1or 3 or just one w 3 intake mani

[@frun4]

Very nice! Swap looks so clean. What are the wheel and tire specs?

[@yotarip]

thanks. wheels are 18x9.5 +22 / 255-35-18 front and 18x10.5 / 285-35-18 rear. rolled the rear fenders flat. need to roll the front before I drive it because the tire will grab the fender in a turn and destroy it.

[@phillee3020]

woahhh thats loud

[@IronNam]

Damn yes

[@ryanthescot]

sounds amazing. what engine management are you using? i just bought a lexus gs430 with the intention of putting the engine into an mx5 (miata)

[@yotarip]

ryanthescot I'm running this 3uz on 1uz vvti ecu and harness. I did that to avoid installing the electric accelerator pedal because of the 3uz e-throttle. I just swapped the 1uz vvti throttle on the 3uz. Engine runs just fine. Btw, the ecu in my setup had the immobilizer bypassed. I sent the ecu to a guy in Russia that modified it.

[@ryanthescot]

ah ok sounds like a good idea. i cant decide whether to run the standard ecu or get an aftermarket one. do you have a build thread anywhere or an email address/fb page so i can ask you some questions?

[@KVN-1000]

can you please explain the smoke coming out of the engine? I'm assuming you know why

[@fayobam_mech_tronics]

Radiator not connected

[@nopantsbandit]

so wait is this that lexus v8 that people always talk about dropping in? if so, does it just mount right up?

[@yotarip]

The 250 hpLexus 1uz is usually the v8 used in this swap. My swap is the 300 hp 3uz. Custom mounts must be used.

[@jordanhilton5996]

whats your exaust setup and does it have a small cam?

[@yotarip]

No cats. 2.5” pipe with x-pipe immediately after the transmission. Then it comes together at a y-pipe just before the differential and a 2.5” magnaflow stainless muffler. 100% stock motor and ecu.

[@jaynotsure670]

Damn, Thumbs up. Looks and sounds like a super car to me. Looks like an LS1.....Dyno #'s?

[@yotarip]

Jay notsure Thanks man. No dyno #'s yet. Hopefully in a couple months.

[@TechyRodsWire]

What rims are these ?

[@lifeofsaad3805]

Are u on stock ac comp

[@Cristian13x]

Sc v8?! Damn i have so many questions

[@jtvincent4053]

How much was that swap? Was it hard?

[@CirocObama.94]

Sounds very good but still doesn't sound as good as my 1jzgte a70😅

[@damonk6289]

how did you run you exhaust a Y pipe or something else ?

[@yotarip]

I'll post up a vid of the exhaust. It's a full 2.5" exhaust with an x pipe right behind the trans. It then comes together to a y-pipe right at the diff. Then a single pipe to the muffler. I have tried a different exhaust design on all my 1uz swaps. The exhaust design on the gold cressida in one of my vids is the best sounding to me. It's a 2.25" true dual with a x-pipe, 2 resonators and pipe pies coming together to one dual in/ single out muffler. Sounds like a huge sport bike.

[@SamGreenup]

What do you have for an exhaust set up?

[@yotarip]

Stock sc400 (non-vvti) exhaust manifolds, 2.5" pipes with an x-pipe just after the transmission. Then the dual pipes come together again at a y-pipe just before the differential. Then it's a single 2.5" pipe up to the magnaflow muffler. No cats or resonators.

[@losminatoatlanta3164]

Damnn sound nice what cars that motor come from

[@filipprucnal]

how bout that/channel how bout that/channel I think it's from a lexus GS, LS or SC 430. It's called the 3uz-fe and it's 4.3l

[@sengcha1077]

bad ass.......

[@snooz510]

Still using drive by wire?

[@yotarip]

I'm using the cable driven e-throttle from a 4.0 1uz vvti engine. Also running the 4.0 1uz vvti ecu and harness.

[@tigergray1100]

Did your Supra pass smog test?

[@chikato7106]

lol

[@DavidGraybrickbeats]

what muffler you have on there?

[@yotarip]

David Gray magnaflow #14805

[@DavidGraybrickbeats]

yotarip it sounds good bro! I'm trying to decide on a muffler for my gs430

[@tigergray1100]

Ohhhhh weeeehhhhhh!!!!!!!

[@Austin-jd4mc]

No coolant your are savage haha

[@brapbrapbrapbrapbrapbrapbrap]

Who did the wiring harness?

[@yotarip]

I do all my own wiring. Just splice the wires needed to run the motor into the harness of the chassis.

[@brapbrapbrapbrapbrapbrapbrap]

yotarip cool. I want to put a 3uz into something one day. Maybe an s14. Any plans for forced induction or itbs?

[@yotarip]

No further plans for modifactions. I'm more of a collector of old toyotas and I like to do restomods. I have a 90 cressida, 81 corolla wagon and a 87 toyota mini that will be getting a 3uz/1UZ vvti swaps too. I also have a 93 MR2 that is getting a 3MZ swap. So many cars for me to spend time and money on.

[@robeddy3722]

@@brapbrapbrapbrapbrapbrapbrap "More" is not always better. Sometimes "this much" is just enough. ;)

[@TheSketchyswag]

What are the heads?

[@yotarip]

Azazel The Freak What do you mean?

[@filipprucnal]

yotarip I think he means the exhaust headers. They sound super nice, so I doubt the exhaust is stock

[@yotarip]

Filip Anonim I’m using the exhaust manifolds from a sc400 . They are the only manifolds that will fit in the Supra. They fit perfectly.

[@acesgsrcivic]

Coolant...no?

[@yotarip]

Ace R. Hodge no coolant

[@nonamus9947]

Fix the valve covers

[@AFPanduhh83]

Sounds Fuck en amazing Bruh. Making me second guess my 1j vvti swap? fuuck. Japanese muscle lol

[@yotarip]

AF _Panduhh! Thanks man. Turns heads all the time.

[@AFPanduhh83]

yotarip yeah I bet bro. Damn really made me double think my 1j swap. I want a 3uz now lol.

[@elijahragandac2304]

Japanese camaro

[@nick_osas]

Drop the sauce 😈

[@juancastilloperez3801]

what rims are on this mk3 ?

[@yotarip]

Juan Castillo Perez they are Zedd SL5 wheels

[@juancastilloperez3801]

mad thanks alot sick mk3 mate

[@Z_LTries]

What size are they? just got my hands on a mk3 and those rims would do her justice!

[@yotarip]

Zach Stublett 18x9.5 /18x10.5 with +22 offset all around

[@Z_LTries]

yotarip Thanks man! mine is in the shop right now, but next on the list is some of these pretty shoes for it :3

[@tylerdustin2008]

Awesome where did you get the potato with the ability to record!? If it's a sweet potato Ill give you $5k for it, or is it a regular potato maybe a Russet, Yukon Gold or a purple Salad potato?

[@strictlysidewaysusa]

Damnnnnn

[@stevensayalath2774]

any plans to get it dynoed to see what it makes for whp?

[@yotarip]

Steven Sayalath yeah. In a couple months. Need to finish a few more things.

[@stevensayalath2774]

yotarip hopefully soon i can join the 3uzfe club in my te72 corolla! nice car man

[@1slow_bk364]

Hey bro quick question you got an instagram?

[@yotarip]

1jz_supraman_2jz yeah. My instagram is yotarip

[@1slow_bk364]

yotarip hell yeah man just gave you a follow

[@MrDLRu]

No coolant running to the motor?.....WTF

[@yotarip]

MrDLRu Hell yeah! Perfectly fine for a short period of time. Don't worry though. I got this.

[@ron89999]

What wheels are those?

[@yotarip]

Zedd SL5 wheels. 18x9.5 and 18x10.5 with +22mm offset all around.