3UZ-FE V8 Lexus IS200 Engine Swap | CBS Racing

3UZ-FE V8 Lexus IS200 Engine Swap at CBS Racing.
----------------------------------------------------
Watch the full process through an Engine Swap performed at CBS Racing Garage step by step.
From planning along with the customer, until the car is ready and running!!
** Engine swaps are performed to satisfy the costumer's demands and wishes **
Enjoy!
www.cbsracing.com/43l-3uz-fe-...
---------------------------------------------------
Video by: CBS Racing
More information:
Website: www.cbsracing.com/
Webshop: www.cbsracingshop.com
Follow us:
Facebook: / cbsracing
Instagram: / cbs_racing
Music:
1. 01 Monody (feat. Laura Brehm)
2. Tropical Summer - MaikonMusic

[@keyboard101101]

Definitely my type of Engine swap! Almost as if it could have come like that from factory.

[@nissewahledow5114]

If it did, BMW woulda gone out of business.

[@raiinydayz1889]

Well it almost did, there was a prototype with this exact engine called the is430😂

[@allen10000000k]

Y’all made this look easy as hell 😂

[@cbsracing]

8min engine swap, haha! No but it's not the worst engine swap, it's one of the 'simpler' ones to do ^^

[@daihq6278]

@@cbsracing does it need changing on the crossmember or engine mounts? Or a direct swap?

[@Mitchievous2]

@@daihq6278 still waiting for a answer :s

[@thaieralawadh2223]

@@cbsracing Thank you for the video. I have classic car with Lexus 3UZ engine in it will a longer custom exhaust better than a pipe ends at the mid of the car? Also, what dimeter pipe exhaust you would recommend? Also, adding 2 mufflers will it help with back pressure or you recommend deleting the mufflers? - forget about the sound. Looking for more torque mainly. Many thanks!

[@cbsracing]

@@thaieralawadh2223 Hi there, Stock and after headers length of the exhaust, or amount of mufflers does not matter as long as you have good flow. We used 2x 2,5inch to 1x 3-inch pipe on that car :) / CBS Racing

[@givemeajackson]

the is430 should have been a standard model. the e46 M3 would have had some serious competition.

[@RobsToys813]

The 1st generation still looks so nice

[@speed488]

4:53 That reaction. We all have the same when we rev a freshly swapped engine. Good job guys 👍

[@philenchymsejour8018]

This is awesome, definitely subscribing. Can't wait to see what you guys do next 👍🏾

[@cbsracing]

Hey! Thank you so much!

[@oclopez7008]

mind is blown and i would rather do this swap over gte for real. price and power is a no brainer. definitely my new goal!

[@PunisherOfDeath101]

I'm contemplating the same deal...but also 1j

[@Landshark928]

Dat is wat ik noem een swappie! Top!

[@tannerbean3801]

Best bumper sticker I've ever seen

[@jakubwiedera1868]

Very good job and nice car !!

[@Adamc0607]

this is pretty cool!

[@oarabilebaiphethi1552]

Awesome quality job.

[@cbsracing]

Thank you so much!

[@timmyoshaunessy1518]

Forge crank. Forge connecting rod. Aluminum coated pistons. Definitely bad ass motor

[@putragiarta]

Great Work 🙏

[@frankluiscespedescastro9155]

Exelente video asi me gusta ver los swap

[@cbsracing]

Muchas gracias!

[@stophatingmichael6767]

Very cool everything doesn't need a GTe swap

If I could hit twice the like button: I would. (Am a new IS200 owner :) ) Please, do not stop what you are doing! Greetings from Spain! :)

[@Mario95CM]

It's a straight swap without any mods necessary apart from wiring? Engine mounts, driveshafts, etc..

[@unkn0wn_bandit414]

What did you guys do to get the original key to work as I've heard it's a bit tricky to do if it's the vvti engine and how does wiring harness stuff work?

[@suvrider]

Awesome video! Looked so easy I decided to engine swap my car but now I have no engine and the car doesn't run 🤣

[@cbsracing]

RIP ... hahahaa

[@jordanwooten4008]

I've been looking everywhere for this engine swap!! I want to 3uz-fe swap my high mile 2jz-ge. I just need to learn how to make good N/A power out of the platform

[@crickmclaughlin195]

Unreal lads

[@Josh-th8by]

I plan on doin this to my is300 within the next year, any advice or things to watch out for during the swap?

[@akarilotube]

Very kick ass!

[@ronniecochran8366]

I already have the car and the engine, but now I'm thinking about LS swap using the collins kit

[@jamal2490able]

is430 love it

[@paddysparrow4528]

Unreal!!

[@user-pu6we9ym1n]

Хорошая работа

[@Dirtypepants]

Does the 3uz drop on the is200 cross member with no modifications?

[@itouchipodz1000]

Would love to just send this car over to y'all and do the magic, I'm starting to contemplate if I should swap out my 2jzge motor for this route or LS, the UZ family honestly should have came as a performance model of the 1st gen IS seeing how natural that car ripped with that motor!

[@denzelmason8021]

Beautiful

[@mikejohnson9118]

You should look into a "Vapor"//Wet sandblaster. The finish is beautiful, looks factory.

[@sotamods-TMH]

Awesome swap! Did you use the 5-speed (A650E) or 6-speed (A761E) transmission? I'm very interested in which parts are absolutely needed for that swap, like the propshaft etc. Is the propshaft an OEM product or custom? Thanks in advance

[@cbsracing]

Hi there, the propshaft is custom :)

[@CombatJJ]

Hey quick question hope it’s answered, but how did you guys get the engine to run and work with the gauges and stuff? I’m really considering this swap in my car just for the reliability and sounds trying to get rid of my 2jz is there a special harness I need to buy for this and if possible can you list a build sheet on what you needed to just get the engine to run and drive in the car? Please and thank you

[@fxxc777]

Hey have you figured out everything needed yet??

[@jose_s_bam7938]

I might do this to my sportcross next year... I'll subscribe and when the time comes I know who to contact. Cheers!

[@cbsracing]

Awesome! Thank you!

[@cottard7698]

Wait a minute .. You swapped it in along with the auto gearbox? Which one is it? A340 or A650? Another thing, what kind of money are we talking here for the swap? Assuming the customer has the donor engine and gearbox.

[@eugeneowens82]

Got a quick question...I have a 06 gs430 hard downshifting from 2nd to 1st gear...no codes or check engine light...only once was a solenoid b stuck code but just that once...do you guys flash ECU...forums say that is the way to go...much improved performance than factory...what would you recommend...

[@cbsracing]

Hi there, We would recommend a professional diagnosis for the hard shifting. And ECU flashing for 'much-improved performance' is not possible on stock ECU. :)

[@Boozna]

Is the lexus IS lighter or heavier with the 1uz/3uz compared with the original 1G? These V8s were suposed to be light and the 6 cylinder 1G heavy.

[@cbsracing]

Hi there! In the end, roughly the same weight if you use the automatic from the Is200.

[@user-od1qt2yz8y]

did 3uz or 1uz heavier than the igfe?

[@VintageAudioTech]

Love the bumper sticker

[@gopnikov1892]

How many 3UZ-fe can cost? I heard many opinions that 1g-fe is slow and I thinking about swap

[@805NAVE]

IS430 boi

[@Tf2N3rd]

Doing this swap - can you guys tell me what radiator hoses you used? And how you got the AC lines to work?

[@cbsracing]

Hi, we 'recycled' the old IS200 hoses and GS hoses. And the AC lines are custom work :)

[@Tf2N3rd]

@@cbsracing im doing the swap and my wife will not be happy if I dont get the ac working

[@robsnizzle7]

Any chance you guys have attempted the 4.7 3uz out of a Tundra?

[@cbsracing]

Hey, We guess you mean the 2UZ, but no we haven't!

[@ShawnWandell]

I've been trying to find where the camshaft position sensors are located on the 3UZ-FE. I have code P1340 and I ordered replacement sensor and I cannot figure out where to put it. I've done extensive searching online and not having any luck. Any help would be greatly appreciated! 2003 LS430

[@cbsracing]

Hello! Sorry the late response. Did you figure it out in the meantime? Otherwise, please send us a message at our FB page! We are more than happy to help you :) facebook.com/CBSRacing/

[@onedropreggaedvd]

What’s the total cost for the swap?

[@fxxc777]

Hello! Im thinking of doing this swap to my is200. Im just wondering what parts have to be changed/modified for this swap. And what would be a rough estimated cost excluding the engine? Thanks

[@cbsracing]

Hey, for more specific questions and pricing, it's better if you will shoot us a message on FB! - CBS Racing!

[@yungjewant7291]

I have 3rd gen gs430 non tunable ecu. Do you offer anything like any prior gen 430 replica ecu for 3GS?

[@yungjewant7291]

Because there's really no reason UZ swaps shouldn't be as easy or sought after as LS's at this point. Plug n play crossmodel ecu+cluster combos would change the game

[@user-qq2gt2iu4u]

Hi. How much swap?

[@donnybellot]

Hi dear I live in the Caribbean and I’m looking to buy a 3uz I wanna swap out me 1g-fe from my is200 it be done and use the 1g-fe transmission?? And do I need in terms of installing the engine or does it just bolt right on with no problem? Thanks

[@simonneve1100]

Please contact us on facebook, its defficult to help like this since every setup is diffrent

[@4sstylz]

Dominator festival hell yeah ,l_l

[@robertcalizaya4628]

Quick question as I already have a 3uz ready to swap do I need to do any engine mount mods or does the original Bolt on?

[@cbsracing]

Hey there, for specific questions about the build you can always reach us at [e-mail] ✌

[@PostMortemor]

How much does it cost to swap a 1UZ vvti or 3UZ and keeping the stock manual gearbox? Thank you

[@cbsracing]

Hey there, there's not really a simple answer to that, as it depends on many factors. You are more welcome to contact us at our facebook page for a small chat about it if you want :) (facebook.com/CBSRacing/) -

[@davidpritchard6685]

I done my vvti swap for about 2k. Verry handy swap to do.

[@blackwersus]

@@davidpritchard6685 did you keep the original IS manual gearbox?

[@Ricardo_Wade]

If you don't mind me asking what transmission did you guys use?

[@cbsracing]

Hey there! We used the stock transmission from the GS430. :)

[@clov3zz860]

Do you guys have a shop in aus? i would love to get yall to 1jz rebuild and swap my 200

[@FiveCurmudgeon9]

They sadly dont have a shop in Australia however theres plenty of Australian shops that can do this for you I'm sure.

[@cbsracing]

Sadly no.. We are based in the Netherlands..

[@DooganFlagan]

now it just needs a supercharger :P

[@cbsracing]

It will happen ! :))

[@RabbitCarrots]

Sooo can we get a 0-60 time on this? Holy smokes - how much did this cost!!!?

[@prim3time3]

OEM 3uz ecu bro?

[@TomBudin]

that diff is gonna be gone soon hahahah

[@devonteherring662]

I would love to ask a few questions. I'm about to do this swap in my is300 sportcross. I can't seem to access your FB account

[@cbsracing]

Hi there, sounds great! I don't know if you have found us in the meantime, but try this direct link to our Facebook: facebook.com/CBSRacing/

[@wil8115]

Does anyone know what muffler that was?

[@cbsracing]

Hi there, It's the varex Exhaust muffler :) We can provide them at www.cbsracingshop.com/en/x-force/

[@gd_media]

Only 92 subs??? No way! 😮 Let me be your 93rd 😄 btw, what was the budget there for the engine, the components, the swap etc. Roughly, to have an idea. Also you guys kept the original diff the car had? Is he drifting that car now? 😄

[@cbsracing]

You are more than welcome to be the 93rd! Our channel is quite new.. We are trying to make more time to create more content :D . For this specific build, it was around 8K. For everything happening in the video according to customer wishes :). We kept the original diff (costumer choice/money things)- However, we don't recommend it. Aaaand it also didn't last long xD it has been replaced since. And no, he's not drifting this car - but we did this same swap to our own driftcar. A Lexus IS220D, you can see how it rolls here: kzbin.info/www/bejne/nX_CqoOBr6l4a6M We want to make a video that car too :)

[@FUXProductions]

The diff broke after 2 weeks 🤣🤣🤣

[@gd_media]

Philipp Fuchs 🤣🤣🤣

[@cbsracing]

@@FUXProductions You knew it would happen bro! Hahaha.

[@FUXProductions]

@@cbsracing i knew it but i was suprised it hapoened after 2 weeks 🤣🤣 but the one now is holding up

[@davidpritchard6685]

Where did yous get the back box

[@cbsracing]

We provide these. Xforce Varex www.cbsracingshop.com/en/x-force/

[@caseyplanthire]

What backbox is that with a valve in it

[@cbsracing]

Varex Exhaust muffler :) We can provide them at www.cbsracingshop.com/en/x-force/

[@Gediminas84]

What engine mountings did you used?

[@cbsracing]

Original :)

[@swapitout5728]

How do I contact you guys about a harness?

[@cbsracing]

Hello, just send us a message through our facebook page! facebook.com/CBSRacing/

[@AgentFoxMulder1972]

wow, lovely. I'd live a v8 under the hood of my Is 200. Why not a manual swap? Nice work!

[@cbsracing]

Thank you so much! The customer preferred to keep it automatic, and for a daily driver/cruiser we think is more enjoyable aswell :) Our own IS430 went from auto to manual.

[@saadzahid6137]

Which transmission you are using ?

[@givemeajackson]

you can use the stock j160 6 speed if you don't boost the 3uz, there are multiple fairly cheap adapter kits out there. it's very easy to fit, it's a lovely gearbox, and it can hold the power a stock 1uz or 3uz makes. stock diff usually can't though, and the ratio is quite short. so a stronger and slightly longer diff makes sense.

[@cbsracing]

We used the stock transmission from the GS430.

[@466rudy6]

I probably would have just driven the GS

[@evannniesen460]

I have a good question, I have a 1UZ-FE and need to replace the VVTI Cover Plate, do you know the OEM Part #? Or even anywhere to get it? Edit: the VVTI Cover Plate is cracked in many pieces

[@cbsracing]

Hey man, sorry for not replying until now! Guess notification drowned... If you still haven't found the cover, you are welcome to contact us directly via fb facebook.com/cbsracing or writing directly to [e-mail] . We can provide most Toyota OEM, as long as is not discontinued :)

[@koolkat1865]

can this swap be done for a 2014 is250?

[@cbsracing]

Hi there, yes you can. In fact, we already did this for our own IS220D driftcar. You can check the post about it here: facebook.com/CBSRacing/posts/1123557088015821 If you have any questions, you can just contact us over FB!

[@koolkat1865]

@@cbsracing epic

[@danecobb4977]

turbo it perhaps???

[@natk8673]

what does a swap like this cost?

[@cbsracing]

Between 8k - 12k

[@MRwilsondraws]

Why the 3uzfe instead of the 1uz-fe?

[@cbsracing]

Hi, stock it has more torque. Being a newer engine it has some 'improvements'; better fuel economy fx :)

[@MRwilsondraws]

@@cbsracing Thanks. I appreciate the response. I have been thinking about doing a 1uz swap.

[@cashdapoet5736]

How much would a build cost?

[@cbsracing]

Hey there, it depends on many factors but anything from 9-12K approx.

[@327Performance]

link to wiring harness kit?

[@cbsracing]

Hey, a kit is not available yet, unfortunately.

[@fxxc777]

​@@cbsracingIs it avaible yet?

[@ivanwijaya7488]

what gearbox do u use bro ?

[@cbsracing]

Hey there, original GS430 gearbox :)

[@R.A.N.B.I]

Fuck it I gotta do it

[@cbsracing]

Full send!

[@HistoricalCracker]

Will never know if the biker was okay 😂

[@cbsracing]

Legend says she's fine xD

[@xXilisminusXx]

Jesus I cannot believe you used that music

[@ManicsVideos]

Isf you say

[@mrnicktoyou]

I wouldn’t be negative because ultimately, if the owner loves it then that’s all that matters. But is all that worth it for just 300hp? I would have gone with a more powerful V8.

[@danielchristopherdc]

325tq cheaper than an LS and still in the Toyota family of engines

[@madxp9668]

Got 2grfe swap ?

[@cbsracing]

Hey, not currently.

[@bunkaaa8726]

Holy cow that music :/

[@fxxc777]

Good right

[@Moondoggy1941]

7:17 I will be the CAREN here, great idea doing a launch right behind a person on a bike. Loser.

[@the_JDM_fanatic]

Ahhhhhhhhhhhh dude you left it auto 🤢

[@cbsracing]

Customers choice :)