You can turn old boards into this

[@johnnywest5445]

Excellent design and build video, but please make your next project a simple bench-top router table before you lose a finger or half your hand.

Hello. First of all, thank you. I assure you that I will not use the router like this again. Best regards...

[@frankcostanzo8391]

Ya please don't. That was terrifying. Not only that, but you should re-edit the video to not show that method to younger less experienced woodworkers. That's very bad technique with high potential for very dangerous consequences.

Yes, I shouldn't do it like this. But the fact that the video was sped up 4 times in that part makes it seem a little more dangerous.

[@RetifsGarage]

As a newbie watching can you tell me which part is more dangerous (everything looks pretty scary to me to be honest…) the most scary was the part at 8:12, you mean that one ? I would never do that, would be scared to death !

[@frankcostanzo8391]

​@@RetifsGaragethat part is exactly what we were talking about. Never ever put your hand that close to a router bit spinning at 1000's of rpms. If that tiny workpiece were to snag or get thrown, your hand is going directly into that bit and getting mangled. Those size workpieces are exactly why you use a router table with a fence and either a push stick or something like the microjig grrripper.

[@DonDrito]

Nice simple project, clean execution, affordable material and tools. One idea: if you make several boxed of the same size, move the corner pieces up slighlty (maybe 5-10 mm), it would make the boxes nicely stackable.

Hello. First of all, thank you. Another friend brought up this idea and it made a lot of sense. Actually, if I had thought of it, I would have done it as you said. I still can because it is a really good idea. It would be a perfect system, especially for storing my piece boards, all the same size and stacked securely on top of each other. Even if a lid is made on top, it would be protected from the dust in the workshop. Thank you again for your comment and idea. Greetings from Turkey 👍

[@Berquin]

I had the same idea and 5mm is enough.😀

[@milltreestudios]

Thank you so much for the video. I was looking for something exactly like this to use as a store for shoes that will go under a small bench I’m making. I’ll likely add some casters to the bottom as well. Your video has helped me massively so thanks again sir!

I would like to thank you very much. This way the boxes always look nice and work. Greetings from Turkey 👍

[@elained9591]

Thanks so much for the great plans! I needed something to hold firewood for a little Solo Mesa stove and from yours, I can make exactly what I need. The only differences will be to keep spiders out so a lid and solid sides with wood handles. But you have me going in the correct direction! Of course I had to hit like and subscribe! Again, thank you!

You watched, subscribed and wrote a nice comment... thank you very much. I share the plans for free in all my videos. Greetings from Turkey 👍

[@miguelbalaguer7920]

👏👏👏👍💝🙏🏻 Exelent Job Brother and please , I agree about the bench router table . 👇Johnny is right about it. I love it the boxes

Hello. Thank you very much and I agree with Johnny 👍

[@anjjohns314]

These are so sharp! Thank you for the plans, too! 👊🏻

Thank you very much. I would like to remind you that you can find the plans in the description section of all my videos. Greetings from Turkey 👍

[@chuky1968]

Saludos…usted es un maestro, lo felicito por su contenido…gracias por compartir sus trabajos!!!

Muchas gracias también. Me alegro que te haya gustado. Saludos desde Turquía 👍

[@samiraba5236]

Great work. Be safe. Thanks for the PDFs

Thank you so much 👍👍👍

[@ЕвгенийЕвгеньев-п9е]

Спасибо! Это действительно просто и можно повторить, и результат очень красивый! И оснастка для циркулярной пилы тоже очень понравилась, попробую сделать для себя то же самое. Спасибо за видео!

Я тоже благодарю вас. Я так рада, что тебе понравилось. Желаю вам здоровых дней 👍

[@lexsk7361]

неплохо бы оснастку для фрезера сделать. А не лезть пальцами в фрезу

Обязательно изготовлю необходимое оборудование. Спасибо за интерес 👍

[@lexsk7361]

Вам спасибо за интересный контент

[@ConcreteLand]

Nice build and free plans! Of course I subscribed. Thank you.

I also thank you. I share PDF plans for free in all my videos. Greetings from Turkey 👍

[@markb8954]

Nice job. Nice diagrams.

Thank you so much 👍

[@robt2151]

You have done well with making or modifying your other tools so PLEASE do something about the router whilst you still can! Now going to explore your other videos.

I will definitely take this warning into consideration. I have made mistakes before and I have taken criticism into consideration. Thank you for your interest. Don't forget to subscribe 😂 Best regards

[@markweaver5872]

Those are very well made. For me, stacking boxes would be more useful than nesting. Nesting are only good while they are empty.

Hello. First of all, thank you. You are right, but I preferred it this way. My wife has already started using it in different places. You can prefer the same size. Thank you again and have a nice day. I would also like to remind you that you can find PDF plans in all my videos.

[@markweaver5872]

Happiness definitely begins this way at home.

I totally agree with you 👍

[@jsmxwll]

I'd be pretty curious to see what those look like in a year or two after expansion and contraction of the wood. They look great though!.

Hello. I don't think there will be a problem with this, but you may still be right. Thank you very much for your interest and comment 👍

[@mathiasoliveira4125]

Obrigado pela generosidade de disponibilizar o projeto.

Agradeço também pelo seu apoio. Saudações, cumprimentos

[@gaetanino54]

great work, sir

Thank you so much. Best regards.

[@arselozgurdal]

Çok temiz işler. Bu video önüme düştü hemen abone oldum. 👍

Çok teşekkür ederim. Beğenmenize sevindim. Kanalımı yeni kesfettiyseniz kullandığım çoğu aletin de videolarını izleyin lütfen. Tezgahların yapımı için gerekli bütün planları da paylaşıyorum. İlginiz ve desteğiniz için tekrar teşekkür ederim

[@reinaldotenorio8956]

campeão parabéns continue respeitando as máquinas ! boa concorrência às caixas de papelão. Deus a direção.

Muito obrigado. Saudações da Turquia 👍

[@WongNdesoKereaktif]

vidio yg sangat menginspirasi dan bermanfaat mantap kawan👍

Terima kasih banyak. Saya senang Anda menyukainya. Salam dari Turki 👍

[@zekiyeaydin6453]

Eline sağlık çok güzel .Başarılarının devamını nasip eylesin.

Teşekkür ederim halacım. Selamlar

[@isaacnguyen6944]

Good job: If one make them all the same size, one option could be tp raise the 4 corners around 1 cm, therefore the boxes would be stackable and locked together.

I understood you very well. If I had thought of this, I would have definitely done it this way. Thank you for your interest and sharing your idea.

[@danielingle2524]

i’ve always wondered when i see videos where most of the tools are handmade, what tools were used to make the tools?

You can watch my videos chronologically. At first I didn't have any workbench. I started by making a circular saw guide. If there was no tool that I needed for a workbench, I made that first. For example, I needed a welding machine for my metal vice, so I made a welding machine and then I made the vice...

[@frankjakobs3058]

Super gemacht.

Vielen Dank. Ich freue mich, dass es Ihnen gefallen hat. Ich möchte Sie daran erinnern, dass Sie im Beschreibungsbereich aller meiner Videos PDF-Pläne finden. Grüße aus der Türkei 👍

[@tombrownrigg8794]

Very cool 😎 👍

Thank you so much 👍

[@VietnamCountry078]

a very good idea

Thank you very much. I'm glad you liked it. You can find PDF plans in the description section of all my videos 👍

[@xavierfaglain6277]

Bonne idée et du bon travail 👍

Merci beaucoup 👍

[@DessieTots]

That hand-held routing is a particularly stupid technique to show and shouldn’t be encouraged.

[@richardmonson8657]

Very nice

Thank you so much 👍

[@황외수-l2b]

안녕하세요 아이디어가 반짝입니다 허리건강은 괜찮으신지요, 이제는 영상 자주볼수 있을까요 건강하시고 좋은영상 많이 올려주세요 😅😅😅😅😅👍👍👍👍👍👍👍👍👍

안녕하세요. 우선, 감사합니다. 허리는 나쁘지 않은데 매우 갑작스러운 움직임은 피해야 합니다. 님도 늘 건강하세요. 여러분의 지원에 감사드립니다 👍

안녕하세요. 한국에 문제가 있다고 들었습니다. 괜찮으세요?

[@황외수-l2b]

걱정해주셔서 감사합니다 아직은 별탈없습니다 잘수습됄거라 생각합니다 관심있게 봐주셔서 감사해요 한국은 평온합니다🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂

👍👍👍

[@germangarces8194]

good!

Thank you 👍

[@jostertervar9916]

Thank you for share👊🏻

Thank you too for your support 👊

[@luisaugustomarques1951]

Muito legal, mas o que mais gostei foram os jigs. Muitos Seguros. Valeu.

Muito obrigado. Como vocês sabem, compartilho os planos de todos os meus projetos. Qualquer pessoa que tenha meios pode fabricar essas ferramentas. Obrigado mais uma vez pelo seu comentário 👍

[@cypok495]

Отлично🎉 Удачи каналу и Мастеру!

Спасибо большое 👍👍👍

[@christownsend7602]

I have to admit, the router part was a little spooky looking. Otherwise, it was a good looking project.

You are right about the router and rest assured that there will be no more images like this. On the other hand, thank you very much for your interest and appreciation.

[@marcoantoniovitoriaarruda8854]

Topper 🎉🇧🇷

Thank you so much / Muchos gracias

[@jairoantonio-jades]

excelente

Muito obrigado. Saudações da Turquia 👍

[@PaulO-mv6ku]

Great project but I didn't half wince when you used the router

Thank you very much. The router usage was wrong. I will be more careful from now on.

[@fabricemenoud3296]

Je trouve l'idée très bonne👍👏, mais je me demande quel est le poids que l'on peut mettre dans la caisse car il y a juste de la colle à bois, à moins que ça soit juste décoratif 🤔

Bonjour. Tout d'abord, merci. Je n'étais pas sûr non plus de la durabilité. Comme je ne voulais pas utiliser de vis, j'ai pu fixer de fines chevilles en bois sur les côtés. Cependant, je pense que la colle est suffisante à cet égard. Je suis sûr que ce ne sera pas un problème même s'il est complètement rempli de fer. Cependant, si vous le souhaitez, une cheville en bois peut être fixée sur le côté de la section de base. Salutations de Turquie 👍

[@adwols2010]

Great! I really like the material and the execution, I'll write a longer comment for YT algorithms :) It has to be at least eight words. It's better to promote such a good master than these mediocre ones that have nothing to offer and are displayed unnecessarily. Best regards

Thank you very much. I am honored. I did not know that the KZbin algorithm pays attention to this. Thank you again for your thoughts and nice comment. Greetings from Turkey 👍

[@sinanyldz5668]

Rahmet sizge 👏

Teşekkürler 👍👍👍

[@yunusbalkanlioglu4826]

Helal olsun kardeş harikası n ben de cok seviyorum ahşap dan bişeyler yapmayı ama atölyem yok daire oturduğum için ama fırsat buldukca otopark bişeyler yapıyorum

Çok teşekkür ederim Yunus bey. Ahşapla uğraşmak güzel. Ama dediğiniz gibi atölye şart. Benim atölyem de çok büyük olmasa da yeterli. Hem aletleri yapıyorum hem de bu tarz şeyleri yapabiliyorum en azından. Tekrar teşekkür ediyorum. Umarım siz de bir atölye sahibi olabilirsiniz. Allah sağlık sıhhat versin yeter ki. Selamlar saygılar...

[@andrewjordan7259]

Came here for the router comments. Was not disappointed.

Hello. You are right about using a router. I hope I will not make such a mistake again. Thank you for your interest.

[@andrewjordan7259]

Please don't loose a finger! I enjoyed your work too much

Thank you very much. I'm glad you liked it. I would like to remind you that you can find PDF plans in all my videos. Greetings from Turkey 👍

[@Pepe-ry8pm]

Las cajas esán muy bien, pero, 8:07 esa operación es peligrosa. Pon la fresadora en una mesa si no quieres quedarte sin dedos 😵‍💫

Hola. Ya está en una mesa 😂. Bromas aparte... tienes razón. Una mesa fresadora definitivamente estará bien. Gracias por tu interés. Saludos desde Turquía 👍

[@peggyrussell1728]

Okay I don't know if I'm just ignorant but I'm trying to figure out these measurements on here for US inches and feet could someone please help me with that cuz I don't know what 350 is and etc

Hello. I use metric measurements. I stated in the last part of the plans that I gave the measurements in mm. You can divide the value by the coefficient of 2.54 to convert it to inches. In other words, 350mm = 350/2.54 = 137.79 inches. Even if the resulting number is a little off, it doesn't matter. For example, you can use 137.8 instead of 137.79. Even the tip thickness of the pen you use when measuring will cause a change in measurement more than this. I hope I was able to explain. I apologize for not being able to help you more. If you still have any questions, please write again. Best regards

[@dondawson8414]

350 mm is 13.75 inches. I have a couple of old tape measures thst show both inches and mm.

[@ИгорьБ-х7м]

Больше заинтересовали станки на которых это сделано

Я понимаю, вы говорите об инструментах, которые я использую вместо деревянных ящиков. Думаю, вы знаете, что являетесь подписчиком моего канала и что я делюсь видео и планами каждого из них. Я люблю делать инструменты, но именно так мы превращаем их в изделия из дерева, верно? Спасибо за интерес 👍

[@ВасилийГудков-е6ч]

Доски с цементом прекрасно строгаются

спасибо. Доски немного зеленеют из-за цемента, но все равно красивы.

[@alexanderzaretsky823]

Дзякуй за працу

Я таксама дзякую. Прывітанне з Турцыі 👍

[@Jexmen]

Amasing

I'm glad you liked it. You can download the plans from the description section. Thank you for your interest and comment.

[@supportteam6808]

God let this man keep his fingers and let him get a router table!!!!

Amen. Thank you very much for your beautiful prayer and for watching my video. I think speeding up the video made it seem worse. But I still admit that I was wrong.

[@amper121]

8:20 aż dziw, że masz jeszcze wszystkie palce:)

Nie znam polskiego, ale skoro podałeś godzinę 8.20, od razu zrozumiałem, co miałeś na myśli. Doskonale zrozumiałem, że popełniłem błąd. Szczerze mówiąc, byłem zbyt pewny siebie. Ale wszystko może się zdarzyć w ciągu 1 sekundy. Od teraz będę bardziej uważać na te kwestie. dziękuję za obejrzenie

[@amper121]

Pozdrawiam:) Miłego dnia:)

Również składam wyrazy szacunku. Pozdrowienia z Turcji 👍

[@nickmichaels5145]

я знаю технику безопасности, как свои три пальца😄

Поздравляю вас. Я понял, что совершил ошибку. Уверяю вас, вы больше никогда не увидите, чтобы я совершал подобные ошибки.

[@Roma-NN]

Как опасно фрезером работал. Молился что бы ему пальцы не повредило..

Тогда я благодарю вас за ваши молитвы. Я буду осторожен и не буду больше использовать такой маршрутизатор.

[@ВасилийГудков-е6ч]

В погоне за количеством просмотров люди предпочитают забыть родной язык.

Почему ты это сказал? Можете ли вы объяснить, пожалуйста?

[@gerbendouma2426]

De titel kopt volgens mij niet… je maakt van oude planken drie mooie bakjes … de titel suggereert het tegenovergestelde 😅

Hallo. Waarom blijkt het tegenovergestelde? Oude planken die ik gebruikte als betonbekisting in de bouw. Zoals je in de video kunt zien, heb ik deze oude planken schoongemaakt en dozen gemaakt waarvan ik dacht dat ze decoratief waren. De tools die ik opschoon en knip zijn de tools waarvan je de video's en plannen op mijn kanaal kunt vinden. Kortom, ik ben het niet met je eens, maar bedankt voor het kijken.

[@gerbendouma2426]

Hoi, ik lees de titel wellicht niet goed. Er staat “Hier kun je oude planken van maken”. Heb gezien wat je van oude planken hebt gemaakt, daarom zou ik eerder geschreven hebben “Dit kan je van oude planken maken”. Idd drie mooie in elkaar passende kistje. Knap gedaan 👍🏼 ik kan het niet !!

Ik moet mij bij jou verontschuldigen. Omdat ik de titel met Google Translate naar het Nederlands heb vertaald. Er kunnen fouten in deze vertaling voorkomen. Ik begreep je een beetje laat. Het spijt me, alsjeblieft.

[@woodrustandthings]

in my language translation = here's how to make old boards, hmm lol

Hello. Which country are you from? Is this how it is reflected in your language?

[@viktormakarenko2448]

У тебя еще все палььцы на месте? Странно! Подума об этом!

Привет. Слава Богу, мои пальцы целы. Но ваша наводящая речь тоже уместна. Я принимаю это. Спасибо за внимание

[@SargeWolf010]

Interesting what I see is an idea using old Pallets and Soda Bottles 🙄

Where are the soda bottles?

[@SargeWolf010]

I'd have to buy them when I go and make these crates

I understand you now. But I also understood that I wasted my time. Anyone who wants can evaluate it as they wish. Or not... thank you for your interest.

[@JBuck-cu7xd]

You could turn that box into a proper router table 😂

😂 Hello. I'm going to make a router table. I'm keeping you waiting but not right now. Please excuse me. Thank you very much for your interest 👍

[@samiraba5236]

I'm impressed with the way he handled it. I will never try it.

Honestly, I don't think you should try it. I won't make that mistake again either.

[@Александр-вч]

👍🤝🇷🇺

Большое спасибо. Привет из Турции 👍

[@OlegOlegos]

Вопрос: на хера ,мне тратить время на это ,если в магазине уже готовый ящик стоит 250 - 300р.(3$)

Я думаю, вам не стоит тратить свое время. Даже не тратьте время на просмотр видеороликов, сделанных своими руками на KZbin. Спасибо за внимание

[@Todjcam]

When you're a woodworker but you also design and build machines as a side hustle..............

Hi. My real profession is electronic engineering. But I love DIY projects and woodworking. As you can see in the video, the tools I use are handmade. You can find the videos on the channel and the plans in the description section of the videos. Thank you for your interest. Greetings from Turkey 👍