You Didn't Know This About 3M Cubitron Sandpaper | Inside 3M's Secret Testing Lab

[@731Woodworks]

▼EXPAND FOR TOOL LINKS and INFO▼ Watch Next: I Investigated Woodpecker's High Prices - kzbin.info/www/bejne/sJCpd4qXgMmCjtUsi=wVpdOu0HiopzkrtT Tools In This Video: 3M Sandpaper 3M 775L Film Back (as shown in video) lddy.no/1hycb 3M 710W Mesh Hook and Loop (what I use) - lddy.no/1hyc6 3M Sander - lddy.no/1hyc3 3M Dust Extractor - lddy.no/1hyc7 3M Fleece Dust Bags 5-pack - lddy.no/1hyc8 3M Dust Extractor Sustainer Adapter Plate - lddy.no/1hyc9 3M Extra HEPA Filters - lddy.no/1hyca 📲 Never miss another tool deal. Sign up for my Tool Deals SMS Alerts - NOTE: I text out tool deals so you don’t miss any! text DEALS to 1 [phone] Be sure to add DEALS to your text to me so you get added to the proper list. You can also click this link my.community.com/731woodworks Important to add the word DEALS to the text! 🇺🇸 Join the Tubafour Nation on Patreon to get an exclusive Tubafour Nation sticker, access to exclusive member-only behind-the-scenes videos, member-only livestreams, discounts, and other cool member-only perks! www.patreon.com/731woodworks (If you use one of these Amazon and other affiliate links, I may receive a commission) Some other useful links: Daily Tool Deals on my website: www.731woodworks.com/tool-deals Subscribe to our email Newsletter: mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter Check out our easy-to-follow woodworking plans: www.731woodworks.com/store Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter

[@themoos8]

what is the difference between the 710W and 310W !?

[@Shannon-v3r]

I really like these informative-deep dive style videos. I’m not sure how well they perform for you but they have their place.

[@731Woodworks]

They've been doing well. We will see how this one goes lol. Thanks!

[@michiganracer1181]

I’ve been using the cubitron stuff for nearly a year now, it’s a phenomenal product!

[@robertmcevoy24]

Special agent Matt of the woodworking community is at it again gets us the inside details of a great product, Thank you 👊🏻👍🏻

[@norm5785]

Wonderful news sandpaper. Thank you for sharing. Everyone stay safe, happy 😊 and healthy. From Henrico County Virginia

[@PaganWizard]

I have also been ordering the mesh sanding disks, I might have to check out some of their other offerings. I didn't recognize the guy where you asked "Anyone know this guy???, but I did recognize Matthew Peech, a bit later in the video.

[@731Woodworks]

It was Drew Witt from WittWorks

[@clintrairdon3554]

Unlike some of the others, I’ve had no issues with the discs staying attached, and I’m in love with how fast my sanding jobs have become 😁

[@kadekosmicki6038]

The second guy is Matthew Peech!

[@pcast1115]

Hey, you were in my neck of the woods Matt!! I live about 3-4 miles as the crow flies from that very 3M plant! Should have come in winter just to say you have experienced a Minnesota winter day! Safe travels!

[@joebeaton1101]

GREAT job marketing yourself!! 👍👍

[@michaelfairchild]

I just used their Cubitron for reapply oil finish to my desk and compared to standard pad its crazy. Of course had to buy the pad savers, but still its an awesome product. I use their VHB tape for years now which is the top of the line product, but found another one with this sandpaper.

[@Shannon-v3r]

I finally took the plunge with the mesh discs. OH MY. What was I doing all this time? I always bought big assortments instead of getting the full line of Cubitron. Unbelievably worth it. I sanded 4 serving trays and 2 9x13 clipboards and think I can probably sand 2 more trays. It gets thrown around a lot but this is a game changer for me

[@JSGenesisDesigns]

I deliver semi loads of pallets right where you are in the video. Too cool

[@reclaimedclassicdesigns-Barb]

Great Information! - Was that Mathew Peech sanding? Love his video's too.

[@731Woodworks]

Yes it was!

[@deannacorbettwhite1]

Thank you again for another great video. I have been using the 3M Cubitron for a while now; although I love the job it does I get very frustrated with how little time it last before flying off the sander or totally ripping up the backing of the sandpaper. I have replaced the sanding pad on all my sanders but find that was not the problem. Any suggestions?

[@lytsabr]

Dogonnit Matt! You were less than 30 minutes away from me and didn't let me know! 😢. I'd've been honored to show you around the Twin Cities. 😁

[@731Woodworks]

Aww dang. Sorry!

[@kwiknikk]

Sander is nice, I splurged on it. 1 month after the 12 month warranty it broke and I had to really talk them into fixing it. I sure hope it doesn't break again..

[@wittworks]

Nice

[@VonDarkmane]

Hey Matt I seen you had a shot with Matthew Peech testing the sander. You guys planning on doing a Calab? Love both of you guys. Now just need the Samurai to come down south.

[@731Woodworks]

No current plans but that would be awesome to do with Matthew.

[@AlienLeader4]

Very cool insight. Thanks for sharing. Keep up the awesome work. 👽

[@731Woodworks]

Thank you Alien Leader!

[@ronswoodshack]

Great information! Thanks Mighty Matt

[@731Woodworks]

You bet!

[@garymiller5937]

Thanks for the tour Matt. 😊 It's nice to now understand what 3M is doing differently. 😊😊😊

[@jimrosson6702]

Great video Matt love my 3M sander wish I cou afford the dust extractor someday God willing.

[@stanleysmith8984]

Next you should do a video on which one to buy. I have been using the new paper and it is longer lasting, sands smoother, less dust. I looked at the products they have and WOW they got a bunch of stuff. So, I was goanna purchase one along with the collector. Just could not decide which one? Also need to know which is better, air power or electric power. Have a blessed day. Thanks.

[@mateuszukasiak7675]

I found Cubitron to really last 20 minutes and still sand pencil lines even when going inch/second. However the backing that hooks to velcro fails (cubitron flies off!). I even tried putting a new pad it cubitron still flew off. Any thoughts? Also, how to fit cubitron to festool 80x133 ?

[@vmoutsop]

Wittworks in the shop!

[@FixItFrench]

I have a feeling this is something you won’t understand until you actually use it for yourself. I have never tried 3M, but I think I will see what all the fuss is about

[@jonathangaliano2617]

Any suggestions as to which 3M sanding discs would be best for pallet wood? I get so confused every time I look because they have so many skus. I've been wanting to try out 3M sanding discs for a while and I need more now so figured I'd give them a try. I'm using a Dewalt 5" cordless random orbital sander btw. Thanks

[@731Woodworks]

Model 775L would be best I think. The adhesive backed one shown in this video.

[@CJRez10]

775L Sandpaper is a 10/10 but the backing needs to be better. If you are going to be switching out between grits especially. I give the backing 3/10. 3M, What say you?

[@Critter145]

Very cool

[@joeschlepp]

i can imagine everyone in the shop hitting the deck every time the dust extractor self cleans the filter thinking it's an active shooter 😂

[@kenerickson4923]

Very informative video. I just got a sample pack of Cubitron in an order from Taytools. I was impressed with the 80 grit especially. Cut sanding time in half in my opinion. Now I'm thinking about the 3M dust extractor you featured in video. I currently use a home-made cyclone and my old Ridgid (noisy) shop vacuum. Would you recommend still using the cyclone separator with the 3M?

[@731Woodworks]

It is a good idea to use the cylcone separator. It'll keep your filter in the shop vac cleaner, longer.

[@kenerickson4923]

@@731Woodworks I made the cyclone over 6 years ago and has helped a lot. My unit is a 5-gal paint bucket with a Thein baffle. The bucket sits on top of an old, discarded Shop Vac a neighbor was throwing away.

[@5ElementsWoodworking]

@drewwitt Is that you sanding SOMEONE ELSES hard white maple????? // Thanks for the deep dive Matt. Looks like you had some good company to grab beers with afterwards.

[@trevasomething213]

Should have asked about the ultra flexible pro grade stuff they stopped making. Lasted way way lionger than cubitron or any other sandpaper. It had a very rubbery film backing that was amazing.

[@trevasomething213]

kzbin.info/www/bejne/h6LIgKmHbdOjlZY this stuff made cubitron look like a bitch

[@kevinroberts9814]

I guess I'll be the only one who hates the Cubitron disks, but I've had really bad performance from them. I tried some on my Milwaukee ROS, and it made the sander feel out of balance, almost to the point I couldn't hold on to it or keep it flat on the surface. When I switched back to a Klingspor disk it ran just fine. I tried the 3M disks on my new Festool sander and had the same problem.

[@Tamara89Gaming]

I need "3M P240 SandBlaster Sandpaper between coats - Very Fine" but can't find it anywhere why have they stopped selling them?

[@siamaklighvani3951]

Excellent I formation

[@texx07]

matthew peech. had just watched his most recent right before yours. lol

[@LYTOMIZE_Woodshop]

I definitely love the sandpaper. The extractor looks good too... which of the 3M or your Festools do you prefer? I'm still trying to decide whether I want this one or a CT36...

[@731Woodworks]

I like the Festool but mainly because I have several Festool tools that it works with, Domino, ETS125 Sander, Rotex Sander, Miter Saw, and Track Saw. Both are good dust extractors.

[@richragan4810]

Matt what is the diference between the 3M Xtract and 3M Cubitron?? Nice work Thank yu!

[@DB_Customs]

I'm not Matt, but I am quite familiar with the 3M products and will take a stab at answering your question. Xtract and Cubitron are "brands" used by 3M. Products branded Xtract include abrasives and tools designed for dust extraction - but is often associated with the 710W mesh abrasive with the pattern on the abrasive side. Products branded Cubitron include all abrasives that utilize some form of ceramic mineral - but is often associated with the 775L which utilizes a 3 mil film backing. The confusing thing is both products fall under both brands. With that said, the 3M Xtract 710W is lower in price, but isn't as durable as the 3M Cubitron 775L. Both products have similar abrasive construction and should offer similar cut and finish. But if you sand over corners and edges frequently, you may see a benefit in using the more expensive 775L film disc. Hope this helps!

[@richragan4810]

@@DB_Customs Thank's much for takng the time to answer this question so well! Now I understand. I had a Dewalt 5 inch orbital that I tried to uses the Extract disks and though extract worked better that the Dewalt brand disks they kept flying off. So when the Dewalt 5in orbital sander started going bad, after 10 years of use, I deciced to go for the 3M 5 inch orbital sander but had buyers remores at fist. That quickly went away because thier 3M sanding sytem is probably the best. I will order a box of Cubitron today. Thanks again for your time! I also learned a great deal from watching this video and never realized the benefits of a good dust collection system over and above just taking the dust out of everything. I fabricate specialized hardwood keepsake boxes on Etsy and sell hundreds! 3M has changed everything!

[@margueritewhite3038]

Is that felt bag reusable?

[@731Woodworks]

I think they would say no…..but if you can empty it, I don't see why not. I've seen people use Festool bags over and over.

[@chris-C8]

Great video. After your review, I picked up the 3M Xtract Cubitron II Net Disc. However, when I was using it to sand drywall or wood, I noticed the back of the sandpaper would get gummed up, effectively blocking the dust extraction (Yes, I had clean filters on my extractor), which is a real bummer because I liked the idea of the product. Now, I've switched back to regular sandpaper.

[@paulellis84]

Was that Brad from Fix This Build That?

[@731Woodworks]

it was Drew Witt from WittWorks

[@Tyomad]

Find that the life of the Cubitron discs is not as long as Mirka Abranet Ace. It sands well, but just doesn’t last

[@watchmewatchthis6531]

That's my home city!!! 😁

[@ttapion]

I'm excited to watch the rest of this ;)

[@officialtree5245]

anyone who's ever sanded without a dusts extractor, etiher bcs u dont have one or just to see, you'll know how fast your paper cakes up, and goes from 40 grit to like 600

[@Slice-Darryl]

i myself bought the 3m 100mm electric sander and its nice when it works but if i use it for around 2-3 hours it gets hotter and i would say more unstable and starts vibrating more and more and cause of that it gets hotter and hotter until the heat shutdown kicks in and it gets loud and i mean extremly loud through all the vibrations i already got 2 replacments form 3m so no complains there but even the 3rd one has the same problem and honestly im getting tiered of it :/

[@AppleTony3]

Are you using it with an extractor?

[@Slice-Darryl]

@@AppleTony3 yes

[@Joey.Darkwoods-Studio]

Peach is cool! lol Y'all have some of the best channels!

[@rf4c1018]

Just bought these and they do not last well. Used with dust extractor. Disappointed. Not very cheap!

[@simonmetz8587]

Problem is that Cubitron has great abrasive properties but is TERRIBLE at sticking to Velcro pads. I have completely stopped using us a custom furniture builder

[@ttapion]

That's wittworks

[@thenext9537]

3m 710w. You have other sand paper? THROW IT ALL AWAY NOW. This paper, life changing. Sanding is so much easier, last longer and saves money in the end. Stop fighting, and throw the damn crap away and buy the 3m stuff. 710w for me, on a Bosch palm sander 5 hole 5”. Gator, craftsmen, whatever is crap. Toss it. Festool, toss it. Yes that’s right get wrecked. Test it yourself and be done!

[@GO-AVS]

I used the 775L for the first time a week ago on a cedar deck. It worked awesome, until it didn't. I went through 2 sheets, in 40 feet of deck boards.... Until they fell apart. @ 2:45 you can see what happens to the sandpaper.

[@731Woodworks]

Interesting. What grit were you using? Using dust extraction? At 2:45 that was dust that was caked on the sanding disc because there was no dust extraction, this one wasn't coming apart.

[@-fazik-3713]

It is a secret!

[@mystic37]

You love your clickbait thumbnails.

[@731Woodworks]

What would you have me do? Just a picture of the sandpaper? A blank image, nothing but black? I'll gladly take advice if you know what works and what doesn't work on KZbin.

[@ttapion]

Can't forget that facial hair ;) peech

[@championwon]

In all your latest thumbnails you bug out your eyes and look crazy. What happen to when you looked like a normal person.

[@731Woodworks]

I try all different styles to see what works best. Sometimes those work better than others.

[@BobMuir100]

Very repetitive! Why weren’t you listening to him? He tells you 40% and then you ask him and surprise it’s 40%! Exactly the same as he just told you!! That’s just one example. Bob England

[@731Woodworks]

Aren't we a ball of sunshine and rainbows today! 🙄

[@BobMuir100]

@@731Woodworks well yes….even Christ struggles with me sometimes! However still true comments Sir!

[@dcruicks1]

Thanks! I learned a lot! Nice to see @MattewPeechwoodworking working too lol

[@michaelwells7348]

~ Goodness Gracious Man ~ We are sanding Wood, Not building Spaces Shuttles ....